summaryrefslogtreecommitdiff
path: root/scheme
AgeCommit message (Collapse)Author
2014-01-18Racket: fix for recompilation of typed/racket modulesJose Antonio Ortega Ruiz
When using our current-load/used-compiled function, we were compiling the syntax of a module using compile, which seems to not honour With luck, this should address bug #14 for real.
2014-01-09Racket: fix for evaluations inside typed/racket modulesJose Antonio Ortega Ruiz
When evaluating (re)definitions in a typed module, it's necessary that the form evaluated is wrapped with #%top-interaction, so that typed racket's redefinition of that macro enters into play and the system records the type information of the new value. Many thanks to Sam Tobin-Hochstadt for the tip, and for his encouraging words.
2014-01-09Racket: duplicate version check removedJose Antonio Ortega Ruiz
We used to check for a good racket version during its start-up, but these days we already have an independent version check before that.
2013-09-13Guile: augmenting %load-compiled-path tooJose Antonio Ortega Ruiz
We add the paths in geiser-guile-load-path also to %load-compiled-path, and new directories added to the load path via geiser-add-to-load-path are added to both %load-path and %load-compiled-path. Here's hope Ludovic will like all these additions!
2013-07-02Debug code removedJose Antonio Ortega Ruiz
2013-06-27Racket: not loading errortrace by defaultJose Antonio Ortega Ruiz
The new submodules and errortrace interact badly, for what i've seen. In particular, even with the submodule[+*] loading correctly, its namespace doesn't have all identifiers bound, and new ones seem to appear in the bindings lists (things like a.1 or b.2, when a and b are the actual identifiers defined inside the module). Since moreover someone mentioned in the devel ML that errortrace is in general terms buggy, i guess we can leave without it for the time being.
2013-06-11racket: ,cd accepting also non-quoted pathsJose Antonio Ortega Ruiz
just because we can
2013-06-11racket: struggling with submodulesJose Antonio Ortega Ruiz
Submodule (re)loading is not without pecularities. In particular, module[*+] submodules are not visited the first time one enters its parent, but once you load them once, they're revisited every time we load the parent afterwards--racket's native enter! exhibits the same behaviour, so i'm guessing we'll have to live with that. There is however a glitch in that submodules can only be reloaded then by loading the parent, so we need to confirm that this is expected behaviour and, if it is, automating the parent's load when the submodule's is requested. On the other hand, entering a module[*+] is not working in Geiser yet, and it does in plain racket, so this one is our fault. Working on it.
2013-06-10racket: new ,geiser-load command in REPLJose Antonio Ortega Ruiz
... and used also internally for C-c C-k, although it doesn't yet work as well as i wanted when it comes to load modules. The reason is probably in geiser/enter, where we don't record modification times per submodule but per path, which is not correct in the presence of submodules.
2013-06-10NitsJose Antonio Ortega Ruiz
2013-06-09racket: C-u C-c C-z on a submodule enters itJose Antonio Ortega Ruiz
2013-06-09racket: handling correctly submodules in load handler during ,enterJose Antonio Ortega Ruiz
That is, complying to the submodule loading protocol (cf. racket's own enter!).
2013-06-08racket: ,gcd -> ,pwdJose Antonio Ortega Ruiz
And we display it (the current path, settable via ,cd) as a string. This was, i'm sure, a secret command nobody is using!
2013-06-08racket: ,enter submodulesJose Antonio Ortega Ruiz
It is now possible to ,enter racket submodules. This is only the first part of the story, because evalations should take place in the submodule, not in its top level module, as it happens now.
2013-06-04Guile: Fix subr argument name retrieval for Guile >= 2.0.9.Ludovic Courtès
2013-04-15Racket: ensuring the first C-c C-d C-i worksJose Antonio Ortega Ruiz
... by the obvious device of waiting for the thread building the index to finish.
2013-04-15Racket: fixing help when REPL is in a moduleJose Antonio Ortega Ruiz
The evaluation of the help form must happen in a good enough namespace.
2013-04-15Racket: pre-loading help also in remote REPLsJose Antonio Ortega Ruiz
2013-04-15Racket: better help commandsJose Antonio Ortega Ruiz
For some reason that i don't fully understand, evaluating a function in the racket/base namespace first thing after loading errortrace breaks the help macro (!). This patches provides a workaround by actually invoking help first thing when Geiser starts, with alibi that it serves to preload the help index (in a separate thread). While i was at it, i improved the message printed in the minibuffer when no help is found.
2013-04-13A better solution to the funky filename problemJose Antonio Ortega Ruiz
So, the problem was that our regexp for a Racket prompt didn't take into account that filenames could contain white spaces: "@[^ ]*> ". A simple solution was accepting them: "@[^>]+> " won't work because '>' is also a valid character in filenames, so we went for "@.*> ". The drawback is that finding the beginning of the prompt (e.g. in C-a) fails when you're writing things like: racket@foo bar.rkt> (> 2 3) because here comint believes that the prompt is "racket@foo bar.rkt> (> " And that could have side-effects elsewhere. So what i've done is simply changing the way white-space is (not) printed in the prompt, substituting it by underscores. That way, whe can go back to the initial regexp, comint doesn't get confused, and users can easily infer that "@foo_bar.rkt>" is actually referring to their "foo bar.rkt" file.
2012-12-14Racket: make sure stderr is flushed in REPLJose Antonio Ortega Ruiz
Thanks to Haiwei Zhou for catching this one!
2012-10-28Racket: fix for module evaluation/enteringJose Antonio Ortega Ruiz
Our module loader is receiving load requests for module names represented as lists that are not exactly a submodule, in the sense that the path does not represent an actual file. This phenomenon happens for instance when specifying a reader in a #lang tag. E.g. #lang at-exp racket will cause the loader to be called with module name '(main reader) and path <cols-path>/at-exp/main.rkt, where main.rkt does not exist. Afterwards, we see a call to load at-exp/lang/reader/rkt, with name reader, which is the real code. So, for now, i'm skipping all load requests with a list name, forwarding them to racket's default loader.
2012-10-11Finishing removal of the "foo ends here" footersJose Antonio Ortega Ruiz
I must admit this is yet another excuse to check geiserbot over at freenode.
2012-09-15racket: correctly jump to symbols defined in .ss modules0.2.1Jose Antonio Ortega Ruiz
Racket is returning by default their canonical "rkt" name, which sometimes is not what's in the filesystem.
2012-09-15racket: fix re-loading of modules with submodules (e.g. plai-typed)Jose Antonio Ortega Ruiz
Resolved module path can now be, besides symbols, a list representing a submodule. When deciding whether what we are loading in enter's current loader is a module or not, we have now to take that bit into account.
2012-09-08racket: autodoc for PLAI's define-typeJose Antonio Ortega Ruiz
2012-09-08Racket: new option to specify network interface for REPL serverJose Antonio Ortega Ruiz
In geiser-racket.sh, there's the new option -n, which uses a new hostname argument accepted by geiser/user's start-geiser function.
2012-09-02Including the new images.rkt in the distributionJose Antonio Ortega Ruiz
By listing it in the corresponding Makefile.am file. I wonder how useful maintaining all this autofoo stuff really is: creating an ELPA package could be more handy for people not using the git repo directly, and much easier to maintain.
2012-09-02racket: displaying images also during evaluationsJose Antonio Ortega Ruiz
2012-09-02Racket: fix for enter!Jose Antonio Ortega Ruiz
2012-09-01Little cleanupsJose Antonio Ortega Ruiz
2012-08-25racket: reading into elisp-land the cache dir as neededJose Antonio Ortega Ruiz
When no cache dir is set in the emacs customization, we ask Racket for the one that it's using by default.
2012-08-20Racket: configurable image cache directoryJose Antonio Ortega Ruiz
Brought to you by a comma-command in the REPL and the REPL startup function.
2012-08-12[WIP] Draw images inline in the Racket REPL.Michael W
On the racket side, we use a custom print handler to print images (convertible? values; see file/convertible) in a special format: #<Image: filename> On the geiser side, we add a comint post-output hook to search for that filename and replace it with inline images.
2012-07-01Racket: fix for module compilation for recent racketsJose Antonio Ortega Ruiz
This one probably requires Racket 5.3, and incorporates some parameterization to the module compilation and evaluation code in Geiser's version of enter.rkt. I'm mostly mirroring what the latter does, and i'm probably not completely understanding all corner cases, so the two users of Geiser should keep an eye open for possible breakage introduced by this patch.
2012-03-24,cd for Racket REPLJose Antonio Ortega Ruiz
It's not perfect and undocumented, but useful nonetheless.
2011-11-26Racket: capturing and displaying standard error during evaluationJose Antonio Ortega Ruiz
This bugs was exposed by using rackunit, where all the output of, say, check-eq? was lost for good (it was being sent to the stderr black hole). Hat tip Grant Retkke.
2011-09-11Guile: capturing output to standard errorJose Antonio Ortega Ruiz
We were just ignoring it so far!
2011-08-24Guile: deprecated format usage eliminatedJose Antonio Ortega Ruiz
Actually, i'm not even sure the calls to format i was using were correct at all!
2011-08-20Leftover code from the previous patch removedJose Antonio Ortega Ruiz
2011-08-20Racket: eval geiser-eval's apply arguments properlyJose Antonio Ortega Ruiz
As Stanisław Halik reported, autodoc was receiving a mlist (instead of a list) as its argument when invoked in an R5RS context. Turns out we were evaluating geiser-eval's arguments in the wrong context (the procedure being applied and the arglist belong to the same namespace).
2011-03-21Racket: use the proper interaction port for input (#32844)Jose Antonio Ortega Ruiz
Thanks to Caleb Reach. We were using current-input-port, which is not the right port in graphical environments.
2011-03-06Racket: geiser-add-to-load-path implementedJose Antonio Ortega Ruiz
And we take the chance to lightly document the existence of this new command in the user manual.
2011-02-27Racket: no errors ,entering an R5RS moduleJose Antonio Ortega Ruiz
The catch here is that one cannot use #%variable-reference inside an R5RS module, and, as a consequence, namespace->module-path-name was failing badly. The solution is to take note of the module name being entered before hand, and use that name in case of error (we could actually use that name always, but then cheaters using Racket's enter! would see an inconsistent name (which probably they deserve)).
2011-02-25Guile: setting *current-warning-prefix* during evaluationJose Antonio Ortega Ruiz
This is a 2.0 fluid that governs how warning messages are displayed. In Geiser, we need the prefix set to an empty string so that file paths are clickable (and the display in a separate emacs buffer is nicer).
2011-02-09Guile: 'format' added to the warning listJose Antonio Ortega Ruiz
2011-02-03New geiser-add-to-load-path, just for Guile right nowJose Antonio Ortega Ruiz
As per Andy's request. Adding it to Racket (and to the user manual), shouldn't be difficult).
2011-01-09Racket: ',enter "foo"' as a synonym of ',enter (file "foo")'Jose Antonio Ortega Ruiz
2011-01-09Guile nitJose Antonio Ortega Ruiz
2010-11-27No more interning in the scheme readerJose Antonio Ortega Ruiz
We avoid using elisp's read for symbols, reading uninterned ones instead. And then, we cannot use symbols as keys in responses from scheme: we're using strings instead.