Making README a product

Generated by simply copying README.org.  The trick of making README a
symbolic link was, well, a trick, and seems to confuse poor Gitlab.

1 files changed, 0 insertions, 212 deletions

diff --git a/README b/README
deleted file mode 100644
index 74d4758..0000000
--- a/README
+++ /dev/null
@@ -1,212 +0,0 @@
--*- mode: org -*-
-* Overview
-
-  Geiser is a generic Emacs/Scheme interaction mode, featuring an
-  enhanced REPL and a set of minor modes improving Emacs' basic scheme
-  major mode. The main functionalities provided are:
-
-    - Evaluation of forms in the namespace of the current module.
-    - Macro expansion.
-    - File/module loading.
-    - Namespace-aware identifier completion (including local bindings,
-      names visible in the current module, and module names).
-    - Autodoc: the echo area shows information about the signature of
-      the procedure/macro around point automatically.
-    - Jump to definition of identifier at point.
-    - Access to documentation (including docstrings when the
-      implementation provides it).
-    - Listings of identifiers exported by a given module.
-    - Listings of callers/callees of procedures.
-    - Rudimentary support for debugging (list of
-      evaluation/compilation error in an Emacs' compilation-mode
-      buffer).
-    - Support for inline images in schemes, such as Racket, that treat
-      them as first order values.
-
-   NOTE: if you're not in a hurry, Geiser's website
-   (http://www.nongnu.org/geiser/) contains a nicer manual, also
-   included in Geiser tarballs as a texinfo file (doc/geiser.info).
-
-* Requirements
-
-    Geiser needs Emacs 23.2 or better, and at least one of the
-    supported scheme implementations:
-      - Guile 2.2 or better.
-      - PLT Racket 6.0 or better.
-      - Chicken 4.8.0 or better.
-      - MIT/GNU Scheme 9.1.1 or better.
-      - Chibi 0.7.3 or better.
-      - Chez 9.4 or better.
-
-* Installation
-
-  The easiest way is to use MELPA, and just type
-  =M-x package-install RET geiser= inside emacs.
-
-  Geiser can be used either directly from its uninstalled source tree
-  or byte-compiled and installed after performing the standard
-  configure/make/make install dance.  See the INSTALL file for more details.
-
-** Chicken Addendum
-    These steps are necessary to fully support Chicken Scheme, but are
-    not required for any other scheme.
-
-    - Install the necessary support eggs:
-
-#+BEGIN_EXAMPLE
-     $ chicken-install -s apropos chicken-doc
-#+END_EXAMPLE
-
-    - Update the Chicken documentation database:
-
-#+BEGIN_EXAMPLE
-     $ cd `csi -p '(chicken-home)'`
-     $ curl http://3e8.org/pub/chicken-doc/chicken-doc-repo.tgz | sudo tar zx
-#+END_EXAMPLE
-
-* Basic configuration
-
-  The loading invocations above install all supported Scheme
-  implementations. You can list explicitly the ones that you want by
-  setting the variable =geiser-active-implementations= *before* loading
-  geiser.el. For instance:
-
-#+BEGIN_SRC elisp
-    (setq geiser-active-implementations '(chicken guile))
-#+END_SRC
-
-  On opening a scheme file, Geiser will try to guess its Scheme,
-  defaulting to the first in the list. Use =C-c C-s= to select the
-  implementation by hand (on a per file basis).
-
-  Check the geiser customization group for some options with:
-
-#+BEGIN_EXAMPLE
-      M-x customize-group RET geiser RET
-#+END_EXAMPLE
-
-  In particular, customize =geiser-<impl>-binary=, which should point
-  to an executable in your path.
-
-  To start a REPL, =M-x geiser=.
-
-** Completion with company-mode
-
-    Geiser offers identifier and module name completion, bound to
-    =M-TAB= and =M-`= respectively. Only names visible in the current
-    module are offered.
-
-    While that is cool and all, things are even better: if you have
-    [[http://company-mode.github.io/][company mode]] installed, Geiser's completion will use it. Just
-    require company-mode and, from then on, any new scheme buffer or
-    REPL will use it.
-
-* Quick key reference
-
-** In Scheme buffers:
-
-   |-------------+--------------------------------------------------|
-   | C-c C-s     | Specify Scheme implementation for buffer         |
-   | C-c C-z     | Switch to REPL                                   |
-   | C-c C-a     | Switch to REPL and current module                |
-   |             |                                                  |
-   |-------------+--------------------------------------------------|
-   | M-.         | Go to definition of identifier at point          |
-   | M-,         | Go back to where M-. was last invoked            |
-   | C-c C-e m   | Ask for a module and open its file               |
-   | C-c C-e C-l | Add a given directory to Scheme's load path      |
-   | C-c C-e [   | Toggle between () and [] for current form        |
-   |             |                                                  |
-   |-------------+--------------------------------------------------|
-   | C-M-x       | Eval definition around point                     |
-   | C-c C-c     | Eval definition around point                     |
-   | C-c M-e     | Eval definition around point and switch to REPL  |
-   | C-x C-e     | Eval sexp before point                           |
-   | C-c C-r     | Eval region                                      |
-   | C-c M-r     | Eval region and switch to REPL                   |
-   | C-c C-b     | Eval buffer                                      |
-   | C-c M-b     | Eval buffer and switch to REPL                   |
-   |             |                                                  |
-   |-------------+--------------------------------------------------|
-   | C-c C-m x   | Macro-expand definition around point             |
-   | C-c C-m e   | Macro-expand sexp before point                   |
-   | C-c C-m r   | Macro-expand region                              |
-   |             |                                                  |
-   |-------------+--------------------------------------------------|
-   | C-c C-k     | Compile and load current buffer                  |
-   | C-c C-l     | Load scheme file                                 |
-   | C-u C-c C-k | Compile and load current buffer, restarting REPL |
-   |             |                                                  |
-   |-------------+--------------------------------------------------|
-   | C-c C-d d   | See documentation for identifier at point        |
-   | C-c C-d s   | See short documentation for identifier at point  |
-   | C-c C-d i   | Look up manual for identifier at point           |
-   | C-c C-d m   | See a list of a module's exported identifiers    |
-   | C-c C-d a   | Toggle autodoc mode                              |
-   |             |                                                  |
-   |-------------+--------------------------------------------------|
-   | C-c <       | Show callers of procedure at point               |
-   | C-c >       | Show callees of procedure at point               |
-   |             |                                                  |
-   |-------------+--------------------------------------------------|
-   | M-TAB       | Complete identifier at point                     |
-   | M-`, C-.    | Complete module name at point                    |
-   | TAB         | Complete identifier at point or indent           |
-   |             | (If geiser-mode-smart-tab-p is t)                |
-   |-------------+--------------------------------------------------|
-
-** In the REPL
-
-    |-------------+----------------------------------------------------|
-    | C-c C-z     | Start Scheme REPL, or jump to previous buffer      |
-    | C-c M-o     | Clear scheme output                                |
-    | C-c C-q     | Kill Scheme process                                |
-    | C-c C-l     | Load scheme file                                   |
-    | C-c C-k     | Nuke REPL: use it if the REPL becomes unresponsive |
-    |             |                                                    |
-    |-------------+----------------------------------------------------|
-    | M-.         | Edit identifier at point                           |
-    | TAB, M-TAB  | Complete identifier at point                       |
-    | M-`, C-.    | Complete module name at point                      |
-    | M-p, M-n    | Prompt history, matching current prefix            |
-    |             |                                                    |
-    |-------------+----------------------------------------------------|
-    | C-c C-m     | Set current module                                 |
-    | C-c C-i     | Import module into current namespace               |
-    | C-c C-r     | Add a given directory to scheme's load path        |
-    |             |                                                    |
-    |-------------+----------------------------------------------------|
-    | C-c C-d C-d | See documentation for symbol at point              |
-    | C-c C-d C-m | See documentation for module                       |
-    | C-c C-d C-a | Toggle autodoc mode                                |
-    |-------------+----------------------------------------------------|
-
-** In the documentation browser:
-
-    |----------+----------------------------------------------|
-    | f        | Next page                                    |
-    | b        | Previous page                                |
-    |          |                                              |
-    |----------+----------------------------------------------|
-    | TAB, n   | Next link                                    |
-    | S-TAB, p | Previous link                                |
-    | N        | Next section                                 |
-    | P        | Previous section                             |
-    |          |                                              |
-    |----------+----------------------------------------------|
-    | k        | Kill current page and go to previous or next |
-    | g, r     | Refresh page                                 |
-    | c        | Clear browsing history                       |
-    |          |                                              |
-    |----------+----------------------------------------------|
-    | ., M-.   | Edit identifier at point                     |
-    | z        | Switch to REPL                               |
-    |          |                                              |
-    |----------+----------------------------------------------|
-    | q        | Bury buffer                                  |
-    |----------+----------------------------------------------|
-
-** In backtrace (evaluation/compile result) buffers:
-
-    - =M-g n=, =M-g p=, =C-x `= for error navigation.
-    - =q= to bury buffer.