summaryrefslogtreecommitdiff
path: root/elisp/geiser-repl.el
AgeCommit message (Collapse)Author
2013-08-12Newish emacsen don't have comint-last-prompt-overlayJose Antonio Ortega Ruiz
... so we have to check if it's defined and, in its defect, use the new shiny comint-last-prompt. A bit of refactoring resulted.
2013-07-02Real solution for the non-ascii-history problemJose Antonio Ortega Ruiz
We were using a history entry separator including \0 that wasn't writeable as an utf-8 file. Changing the separator to \n}{\n allows using UTF-8 characters in the REPL which are correctly read back.
2013-07-01A couple of byte-compilation warnings goneJose Antonio Ortega Ruiz
2013-07-01Another not entirely satisfactory experiment with raw-textJose Antonio Ortega Ruiz
2013-07-01Experiment setting history file coding systemJose Antonio Ortega Ruiz
2013-05-21yank input if point is over history inputDarren Hoo
2013-04-11New flag to automatically start REPLs when geiser-mode is activatedJose Antonio Ortega Ruiz
When no live REPL is found, of course. The flag's imaginatively called geiser-mode-start-repl-p.
2013-04-09New customizable geiser-repl-query-on-kill-pJose Antonio Ortega Ruiz
In case you don't care about killing live REPLs...
2013-03-01Using implementation-specific keywords also in REPLJose Antonio Ortega Ruiz
And, while we're at it, honour the new case-sentive flag, as suggested by Diogo.
2012-11-11New command geiser-repl-clear-bufferJose Antonio Ortega Ruiz
Just renamed geiser-repl--clear-buffer (we don't use -- when users can call the command with M-x normally) and added documentation.
2012-11-09New function 'geiser-repl--clear-buffer'Jonas Rodrigues
2012-10-27Filename completion also in scheme buffersJose Antonio Ortega Ruiz
By means of a new entry in completion-at-point-functions that uses the handy comint-filename-completion.
2012-10-24Completing file names at the REPL, but only in string contextsJose Antonio Ortega Ruiz
2012-10-24Completing file names at the REPLJose Antonio Ortega Ruiz
When no other completion is available, that is.
2012-10-23New custom var `geiser-repl-save-debugging-history-p'Jose Antonio Ortega Ruiz
This variable controls whether REPL command history should contain inputs during the debugger sessions (for schemes with such a thing, that is, for Guile).
2012-10-13Manual lookup shortcut (C-c C-d i) also in REPL buffersJose Antonio Ortega Ruiz
2012-09-02racket: displaying images also during evaluationsJose Antonio Ortega Ruiz
2012-09-02Image support: buttons and auto-display in the REPLJose Antonio Ortega Ruiz
When geiser-repl-inline-images-p is false (or we're in a terminal), the inserted text replacement is a button that calls the external viewer on click. There's also a parameter controlling whether the viewer should be invoked automatically upon insertion.
2012-09-02Image display functionality refactored to its own moduleJose Antonio Ortega Ruiz
2012-08-15Simplified image display.Michael W
Emacs now remembers the directory that Racket put the last image in. It leaves up to 10 previously viewed images in this directory, providing an 'image history'. This also reduces memory requirements; emacs no longer reads image content into memory.
2012-08-15Documentation improvementsMichael W
2012-08-12[WIP] Add capability for images to be viewed in an external image viewer.Michael W
2012-08-12[WIP] Emacs cleans up temp. images, and a parameter controls whether or not ↵Michael W
they are displayed in the REPL.
2012-08-12[WIP] Draw images inline in the Racket REPL.Michael W
On the racket side, we use a custom print handler to print images (convertible? values; see file/convertible) in a special format: #<Image: filename> On the geiser side, we add a comint post-output hook to search for that filename and replace it with inline images.
2012-06-09Support for user-defined Guile info nodesJose Antonio Ortega Ruiz
In my debian machine, the info nodes for guile live in the "guile-2.0" node, rather than plain "guile". A new customizable variable, geiser-guile-manual-lookup-nodes, lets now specify additional names, and we only add indexes to the info-lookup mode definition when the node actually exists.
2012-02-05Keeping autodoc active in the REPLJose Antonio Ortega Ruiz
We were not re-activating it on new input, cause we weren't detecting the prompt unless preceeded by other output (and, hence, a newline).
2011-09-08bug fix: make C-c C-z behave with run-geiserJose Antonio Ortega Ruiz
The nice go-back-to-previous-scheme-buffer behaviour of C-c C-z wasn't working when the jump from a scheme file to the REPL was initiated via run-geiser. Thanks, Marijn.
2011-08-20REPL: restore TAB indenting behaviour around whitespaceJose Antonio Ortega Ruiz
2011-08-20REPL: new customizable faces for input and promptJose Antonio Ortega Ruiz
Namely, geiser-font-lock-repl-prompt and geiser-font-lock-repl-input.
2011-08-20elisp: customizable patience amount on racket startupJose Antonio Ortega Ruiz
In this little notebook i'm using, racket takes its time to start. In fact, it can take more the previously slotted 10 seconds. Hence the new geiser-repl-startup-time variable.
2011-06-23Avoid (read) breakage (fixes #33090)jao
Autodoc was firing while the REPL was waiting for input of a (read) call, causing all kinds of misbehaviour. We now inhibit autodoc on sending a form for evaluation and re-inhibit it once a prompt is read back again.
2011-03-06Bug fix: don't confuse REPL buffersJose Antonio Ortega Ruiz
We were not checking the implementation associated to a REPL buffer when reusing it, with much confusion ensued.
2011-03-06Missing require formJose Antonio Ortega Ruiz
2011-03-06Elisp nitJose Antonio Ortega Ruiz
Nothing interesting, really.
2011-03-05Bug fix: honour geiser-repl-use-other-windowJose Antonio Ortega Ruiz
2011-02-14Guile REPL: bug fix: correctly track debugging statusJose Antonio Ortega Ruiz
We weren't tracking the "enter debugger" event correctly, and all evaluations in debug mode were failing. There's still (at least) another bug, because error navigation in backtraces seems broken.
2011-02-11Bug fix: M-x geiser-edit-module works again in the REPLJose Antonio Ortega Ruiz
2011-02-03Off-by-one in geiser-repl-tab-dwimJose Antonio Ortega Ruiz
2011-02-03New geiser-add-to-load-path, just for Guile right nowJose Antonio Ortega Ruiz
As per Andy's request. Adding it to Racket (and to the user manual), shouldn't be difficult).
2011-01-24company-mode fixes (an attempt to fix #32231)Jose Antonio Ortega Ruiz
i hope the anonymous reporter will check this...
2011-01-23geiser-repl--tab -> geiser-repl-tab-dwimJose Antonio Ortega Ruiz
Following a suggestion by M. Harig, and following the policy that it's better for command names to not be doubly hyphenated.
2011-01-07REPL: M-TAB bound to completion-at-pointJose Antonio Ortega Ruiz
TAB already does all the other stuff.
2011-01-07REPL: fix for history navigationJose Antonio Ortega Ruiz
We were using a comint-get-old-input function that was including the prompt in its returned value. This was no problem most of the time because we don't use comint-send-input before the process mark, but there's another circumstance under which comint-get-old-input is called, namely, when reaching the end of the input history. When history is exhausted, the "old input" is inserted (go figure), and we were inserting a prompt, wreaking havoc with its read-only-ness.
2010-11-26Remove unnecessary calls to symbol-at-pointJose Antonio Ortega Ruiz
... which interns the symbol in the global obarray: rather unfriendly. We still need to remove a few calls to that beast, and avoid intern in the scheme reader.
2010-11-25Completion: respecting tab-always-indentJose Antonio Ortega Ruiz
... and actually using it to implement geiser-smart-tab-mode. Always nice to un-reinvent-the-wheel.
2010-11-25Guile: fix for connect-to-guile problemsJose Antonio Ortega Ruiz
Was a real bug, after all, and quite reproducible. Sending an ,use metacommand was not returning a prompt, and we were waiting for ever to start (or almost). Now, connect-to-guile is not only right, but spiffy again.
2010-11-22Fix for compiled GeiserJose Antonio Ortega Ruiz
geiser-repl was missing a (require 'geiser-doc) that was making things go pretty awry for compiled geiser on os x (emacs 23.2.20), but nowhere else, for reasons that escape me. Issue was, the popup buffer macros were not seen. Go figure.
2010-11-15REPL: sexpy history file (fix for #30269)Jose Antonio Ortega Ruiz
The trick consists on using a comint-input-ring-separator that is *not* a newline, both for reading and writing the history file.
2010-11-14Smoother REPL exit (deactivating the connection)Jose Antonio Ortega Ruiz
2010-11-14Smoother reloadJose Antonio Ortega Ruiz
Let's not wait for active connections to clear their queue when we're shutting down the REPL.