0.3.2 release

11 files changed, 272 insertions, 13 deletions

diff --git a/.cvsignore b/.cvsignore
index 2b474c7..90946fb 100644
--- a/.cvsignore
+++ b/.cvsignore
@@ -17,6 +17,7 @@ mdk-0.1.1.tar.gz
 mdk-0.1.tar.gz
 mdk-0.2.tar.gz
 mdk-0.3.1.tar.gz
+mdk-0.3.2.tar.gz
 mdk-0.3.tar.gz
 mixmvc
 stamp-h
diff --git a/ChangeLog b/ChangeLog
index addacfb..0ca4310 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,164 @@
+2001-05-16 01:08  jao
+
+	* .cvsignore, configure.in, updatelog, doc/mdk.texi,
+	doc/mdk_gmixvm.texi, doc/mdk_install.texi, doc/img/ss_colors.jpg,
+	doc/img/ss_goto.jpg, mixlib/mix.h, samples/.cvsignore:
+
+	0.3.2 release 
+
+2001-05-14 00:58  jao
+
+	* THANKS, NEWS:
+
+	name typo 
+
+2001-05-14 00:54  jao
+
+	* NEWS, THANKS:
+
+	0.3.2 release 
+
+2001-05-11 00:10  jao
+
+	* NEWS:
+
+	0.3.2 release 
+
+2001-05-10 23:48  jao
+
+	* mixgtk/: mixgtk.glade, mixgtk_device.c, mixgtk_fontsel.c:
+
+	devices font customisation added 
+
+2001-05-10 01:45  jao
+
+	* mixlib/: mix_file.c, xmix_io.c:
+
+	read/write files not truncated if they already exist 
+
+2001-05-10 01:17  jao
+
+	* mixgtk/mixgtk_device.c:
+
+	minor changes 
+
+2001-05-10 01:16  jao
+
+	* mixlib/: mix_io.c, xmix_device.c, xmix_io.c:
+
+	(mix_io_write_*_array) bug corrected 
+
+2001-05-08 01:03  jao
+
+	* mixgtk/mixgtk_device.c:
+
+	use of virtual device destructor to delete devices after program
+	reload 
+
+2001-05-08 01:02  jao
+
+	* mixlib/: mix_device.c, mix_vm.c, xmix_device.c, xmix_device.h:
+
+	mix_device_t: virtual destructor added 
+
+2001-05-06 23:38  jao
+
+	* mixgtk/mixgtk_device.c, mixlib/mix_device.c,
+	mixlib/xmix_device.c, mixlib/xmix_device.h:
+
+	support for gtk binary devices added 
+
+2001-05-04 01:48  jao
+
+	* mixlib/: mix_vm.c, mix_vm.h, xmix_vm.c, xmix_vm.h:
+
+	new devices are created by a (possibly externally provided) factory 
+
+2001-05-04 01:35  jao
+
+	* mixgtk/mixgtk_fontsel.c:
+
+	(change_font_) setting current font on fontsel dialog when available 
+
+2001-05-04 01:34  jao
+
+	* mixgtk/mixgtk.c:
+
+	(mixgtk_init) check for the existence of glade xml file(s) before
+	using it 
+
+2001-04-30 01:28  jao
+
+	* mixgtk/mixgtk.glade:
+
+	minor changes 
+
+2001-04-29 22:40  jao
+
+	* mixgtk/: mixgtk_fontsel.c, mixgtk_mixal.c:
+
+	config file handling added 
+
+2001-04-29 14:56  jao
+
+	* mixgtk/: Makefile.am, mixgtk.c, mixgtk.glade, mixgtk.h,
+	mixgtk_config.c, mixgtk_config.h, mixgtk_fontsel.c,
+	mixgtk_gen_handlers.c, mixgtk_gen_handlers.h, mixgtk_widgets.c:
+
+	config file handling added 
+
+2001-04-28 22:54  jao
+
+	* mixgtk/: Makefile.am, gmixvm.c, mixgtk.c, mixgtk.h:
+
+	initialisation, clean-up and main functionality split 
+
+2001-04-28 00:54  jao
+
+	* mixgtk/: .cvsignore, Makefile.am, mixgtk.c, mixgtk.glade,
+	mixgtk_fontsel.c, mixgtk_fontsel.h, mixgtk_widgets.c,
+	mixgtk_widgets.h:
+
+	font customization added 
+
+2001-04-23 23:30  jao
+
+	* mixutils/Makefile.am:
+
+	intlibs recovered 
+
+2001-04-22 22:07  jao
+
+	* mixlib/mix_vm_command.c:
+
+	(cmd_pmem_) seg fault when freeing (changed) arg valued corrected 
+
+2001-04-22 02:04  jao
+
+	* mixgtk/: Makefile.am, mixgtk.c, mixgtk.glade, mixgtk_colorsel.c,
+	mixgtk_colorsel.h, mixgtk_mixal.c, mixgtk_mixal.h,
+	mixgtk_widgets.c, mixgtk_widgets.h:
+
+	color custumozation added 
+
+2001-04-21 23:59  jao
+
+	* doc/mdk_install.texi:
+
+	minor changes 
+
+2001-04-21 23:30  jao
+
+	* mixgtk/mixgtk_mixal.c:
+
+	(on_mixal_select_row) set/unset breakpoints on location line 
+
+2001-04-09 01:15  jao
+
+	* INSTALL:
+
+	release 0.3.1 
+
 2001-04-09 00:40  jao
 
 	* .cvsignore:
@@ -6,7 +167,7 @@
 
 2001-04-09 00:40  jao
 
-	* doc/: mdk.texi, mdk_install.texi:
+	* doc/mdk.texi, doc/mdk_install.texi, ChangeLog:
 
 	release 0.3.1 
 
diff --git a/configure.in b/configure.in
index 34112e9..d853a85 100644
--- a/configure.in
+++ b/configure.in
@@ -10,7 +10,7 @@
 
 AC_INIT(mixlib/mix.h)
 AM_CONFIG_HEADER(config.h)
-AM_INIT_AUTOMAKE(mdk,0.3.1)
+AM_INIT_AUTOMAKE(mdk,0.3.2)
 
 AM_MAINTAINER_MODE
 
diff --git a/doc/img/ss_colors.jpg b/doc/img/ss_colors.jpg
new file mode 100644
index 0000000..fe2afd8
--- /dev/null
+++ b/doc/img/ss_colors.jpg
diff --git a/doc/img/ss_goto.jpg b/doc/img/ss_goto.jpg
new file mode 100644
index 0000000..cf6d8ba
--- /dev/null
+++ b/doc/img/ss_goto.jpg
diff --git a/doc/mdk.texi b/doc/mdk.texi
index 9afe029..38c0a02 100644
--- a/doc/mdk.texi
+++ b/doc/mdk.texi
@@ -13,8 +13,8 @@
 
 
 @set UPDATED 20 February 2001
-@set EDITION 0.3.1
-@set VERSION 0.3.1
+@set EDITION 0.3.2
+@set VERSION 0.3.2
 @set JAO Jose Antonio Ortega Ruiz
 @set PHILIP Philip E. King
 @footnotestyle separate
diff --git a/doc/mdk_gmixvm.texi b/doc/mdk_gmixvm.texi
index 81ced1d..17c46f7 100644
--- a/doc/mdk_gmixvm.texi
+++ b/doc/mdk_gmixvm.texi
@@ -55,6 +55,11 @@ issued commands are presented. These widgets implement a @code{mixvm}
 console which offers almost the same functionality as its @acronym{CLI}
 counterpart. 
 
+When @code{gmixvm} is run, it creates a directory named @file{.gmixvm}
+in your home directory (if it does not already exist). The
+@file{.gmixvm} directory contains the program settings and the device
+files used by your MIX programs (@pxref{Devices}).
+
 The following sections describe the above mentioned components of
 @code{gmixvm}. 
 
@@ -69,7 +74,34 @@ the same functionality as its @acronym{CLI} counterpart, @code{mixvm}
 @code{gmixvm}'s command prompt in order to manipulate the MIX virtual
 machine. Please, refer to @xref{mixvm}, for a description of these
 commands, and to @xref{Getting started}, for a tutorial on using the MIX
-virtual machine.
+virtual machine. The command prompt offers command line completion for
+partially typed commands using the @kbd{RET} key; e.g., if you type
+
+@example
+lo @kbd{RET}
+@end example
+@noindent
+the command is automatically completed to @code{load}. If multiple
+completions are available, they will be shown in the echo area. Thus,
+typing
+
+@example
+p @kbd{RET}
+@end example
+@noindent
+will produce the following output on the echo area:
+
+@example
+Completions:
+pc     psym     preg     pflags     pall     
+pmem  
+@end example
+@noindent
+which lists all the available commands starting with @code{p}.
+
+You can change the font used to display the issued commands and the
+messages in the echo area using the @w{Settings->Change font->Command
+prompt} and @w{Settings->Change font->Command log} menu commands.
 
 @node MIX virtual machine, MIXAL source view, MIXVM console, gmixvm
 @comment  node-name,  next,  previous,  up
@@ -96,16 +128,25 @@ address column's title, a dialog asking you for a memory address will
 appear; if you introduce a valid address, this will be the first cell
 displayed in the scrollable list after you click the OK button.
 
+@ifnotinfo
+The next figure shows the enter address dialog.
+@image{img/ss_goto}
+@end ifnotinfo
+
+
 The register contents are shown as a list of MIX bytes plus sign. If you
 place the mouse pointer over any of them, the decimal value of this MIX
 word will appear inside a tooltip.
 
+You can change the font used to display the MIX virtual machine contents
+using the @w{Settings->Change font->MIX} menu command.
+
 @node MIXAL source view, MIX devices view, MIX virtual machine, gmixvm
 @comment  node-name,  next,  previous,  up
 @section MIXAL source view
 
 The second notebook's page, dubbed MIXAL, shows you the MIXAL source of
-the currently loaded MIX file. A shown in the next figure, the
+the currently loaded MIX file. As shown in the next figure, the
 information is presented in two columns.
 
 @image{img/ss_mixal, 400pt}
@@ -117,20 +158,47 @@ location of the location counter is highlighted in grey, while any set
 breakpoint is marked in red. You can set/unset breakpoints by clicking
 on any line in this view which has an associated memory address.
 
+The colors used to mark the location pointer line and the breakpoints
+can be customized with the @w{Settings->Colors...} menu command. When you
+click on this menu item, a dialog showing the current line colors will
+appear. 
+
+@ifnotinfo
+The following figure shows the change color dialog.
+@image{img/ss_colors}
+@end ifnotinfo
+
+Clicking on any of the colors will produce a color selection dialog for
+choosing a new color for the given element. In this way, you can change
+the foreground and background colors used for drawing the current line,
+the lines where breakpoints have been set and plain MIXAL code lines.
+
+You can change the font used to display the MIXAL source code
+using the @w{Settings->Change font->MIXAL} menu command.
+
+
 @node MIX devices view, Menu and status bars, MIXAL source view, gmixvm
 @comment  node-name,  next,  previous,  up
 @section MIX devices view
 
-The last notebook page, dubbed Devices, shows you the output on
-character based MIX devices (the console, line printer and paper tape,
-@pxref{Devices}) produced by the running program. The binary
-input/output devices (disks, cards, etc.) are handled via files, as in
-@code{mixvm} (@pxref{Devices}).
+The last notebook page, dubbed Devices, shows you the output/input
+to/from MIX block devices (the console, line printer, paper tape,
+disks, card and tapes @pxref{Devices}) produced by the running
+program. 
 
 @ifnotinfo
 @image{img/ss_devices, 400pt}
 @end ifnotinfo
 
+Input device contents is read from files located in the
+@file{~/.gmivm} directory, and the output is also written in files
+at the same location. Note that device tabs will appear as they are used
+by the program being run, and that loading a new MIX program will close
+all previously open devices.
+
+You can change the font used to display the devices content
+using the @w{Settings->Change font->Devices} menu command.
+
 @node Menu and status bars,  , MIX devices view, gmixvm
 @comment  node-name,  next,  previous,  up
 @section Menu and status bars
@@ -163,6 +231,25 @@ Clears all currently set breakpoints. It is equivalent to the
 @code{mixvm}'s @code{cabp} command.
 @end deffn
 
+@deffn Settings Colors...
+Lets you change the colors used to mark the current and breakpoint lines
+in the MIXAL tab, as well as the colors used for plain source lines.
+@end deffn
+
+@deffn Settings Change font
+Lets you change the font used in the various @code{gmixv} widgets
+(i.e. commad prompt, command log, MIX, MIXAL and devices).
+@end deffn
+
+@deffn Settings Save
+Saves the current settings (colors and fonts).
+@end deffn
+
+@deffn Settins Save on exit
+Mark this checkbox if you want @code{gmixvm} to save its settings
+(colors and fonts) every time you quit the program.
+@end deffn
+
 @deffn Help About...
 Shows information about @code{gmixvm}'s version and copyright.
 @end deffn
diff --git a/doc/mdk_install.texi b/doc/mdk_install.texi
index d09426a..b337fd8 100644
--- a/doc/mdk_install.texi
+++ b/doc/mdk_install.texi
@@ -190,6 +190,14 @@ Redhat GNU/Linux 7.0 (Agustin Navarro), 6.2 (Roberto Ferrero)
 FreeBSD 4.2 (Ying-Chieh Liao)
 @item
 Solaris 2.8/gcc 2.95.3 (Stephen Ramsay)
+@item
+MS Windows 98 SE/Cygwin 1.1.8-2 (Christoph von
+Nathusius)@footnote{Caveats: Christoph has only tested @code{mixvm} and
+@code{mixasm} on this platform, using @code{gcc} 2.95.3-2, @code{GLIB}
+1.2.10 and @code{GNUreadline} 4.1-2. He has reported missing history
+functionalities on a first try. If you find problems with
+history/readline functionality, please try a newer/manually installed
+readline version.}
 @end itemize
 
 MDK will probably work on any GNU/Linux and BSD platform. If you try it
diff --git a/mixlib/mix.h b/mixlib/mix.h
index 42eb4c9..37e7453 100644
--- a/mixlib/mix.h
+++ b/mixlib/mix.h
@@ -1,7 +1,7 @@
 /* -*-c-*- ---------------- mix.h :
  * Initialisation of the mix library
  * ------------------------------------------------------------------
- * Copyright (C) 2000 Free Software Foundation, Inc.
+ * Copyright (C) 2000, 2001 Free Software Foundation, Inc.
  *  
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -39,7 +39,7 @@
 #	include <libintl.h>
 #	define gettext_noop(String)	(String)
 #else
-#	include <intl/libintl.h>
+#	include <intl/libgettext.h>
 #endif 
 
 #define _(String) gettext (String)
diff --git a/samples/.cvsignore b/samples/.cvsignore
index f1dc6ac..8856f7c 100644
--- a/samples/.cvsignore
+++ b/samples/.cvsignore
@@ -30,6 +30,7 @@ stress4.mls
 stress5.mix
 stress5.mixal
 stress5.mls
+stress6.mix
 tape0.dev
 tape1.dev
 tape2.dev
diff --git a/updatelog b/updatelog
new file mode 100755
index 0000000..4ac1d1c
--- /dev/null
+++ b/updatelog
@@ -0,0 +1 @@
+cvs2cl --fsf -S -P