summaryrefslogtreecommitdiffhomepage
path: root/INSTALL
diff options
context:
space:
mode:
Diffstat (limited to 'INSTALL')
-rw-r--r--INSTALL309
1 files changed, 309 insertions, 0 deletions
diff --git a/INSTALL b/INSTALL
new file mode 100644
index 0000000..0e5eb99
--- /dev/null
+++ b/INSTALL
@@ -0,0 +1,309 @@
+1. Installing MDK
+
+ 1.1 Download the source tarball
+ 1.2 Requirements
+ 1.3 Basic installation
+ 1.4 Emacs support
+ 1.5 Special configure flags
+ 1.6 Generic configure help
+
+1.1 Download the source tarball
+-------------------------------
+
+GNU MDK is distributed as a source tarball available for download in the
+following URLs:
+
+ * ftp://ftp.gnu.org/pub/gnu/mdk (or one of its mirrors)
+ * http://sourceforge.net/project/showfiles.php?group_id=13897
+
+The above sites contain the latest stable releases of MDK. The development
+branch is available at:
+
+ * http://sourceforge.net/cvs/?group_id=13897
+
+After you have downloaded the source tarball, unpack it in a directory of
+your choice using the command:
+
+ tar xfvz mdk-X.Y.tar.gz
+
+where X.Y stands for the downloaded version (the current stable release
+being version ).
+
+
+1.2 Requirements
+----------------
+
+In order to build and install MDK, you will need the following libraries
+installed in your system:
+
+ * GLIB 1.2.0 (required)
+ * GNU Flex 2.3 (required)
+ * GTK+ 1.2.0 (optional)
+ * libglade (optional)
+ * GNU readline and history libraries (optional)
+
+If present, readline and history are used to provide command completion and
+history management to the command line MIX virtual machine, mixvm GTK+ and
+libglade are needed if you want to build the graphical interface to the MIX
+virtual machine, gmixvm.
+
+Please note: you need both the libraries and the headers; this means both
+the library package and the `-dev' package if you do not compile your
+libraries yourself (ex: installing `libgtk1.2' and `libgtk1.2-dev' on
+Debian).
+
+
+1.3 Basic installation
+----------------------
+
+MDK uses GNU Autoconf and Automake tools, and, therefore, should be built
+and installed without hassle using the following commands inside the source
+directory:
+
+ ./configure
+ make
+ make install
+
+where the last one must be run as root.
+
+The first command, configure, will setup the makefiles for your system. In
+particular, configure will look for GTK+ and libglade, and, if they are
+present, will generate the appropiate makefiles for building the gmixvm
+graphical user interface. Upon completion, you should see a message with the
+configuration results like the following:
+
+ *** GNU MDK 0.3 has been successfully configured. ***
+
+ Type make to build the following utilities:
+ - mixasm (MIX assembler)
+ - mixvm (MIX virtual machine, with readline support)
+ - gmixvm (mixvm GTK+ GUI)
+
+where the last line may be missing if you lack the above mentioned
+libraries.
+
+The next command, make, will actually build the MDK programs in the
+following locations:
+
+ * `mixutils/mixasm'
+ * `mixutils/mixvm'
+ * `mixgtk/gmixvm'
+
+You can run these programs from within their directories, but I recommend
+you to install them in proper locations using make install from a root
+shell.
+
+1.4 Emacs support
+-----------------
+
+mixvm can be run within an Emacs GUD buffer using the elisp
+program misc/mixvm.el, kindly contributed by Philip King.
+
+mixvm.el provides an interface between mdk's mixvm
+and Emacs, via GUD. Place this file in your load-path,
+optionally adding the following line to your .emacs file:
+
+(autoload 'mixvm "mixvm" "mixvm/gud interaction" t)
+
+
+1.5 Special configure flags
+---------------------------
+
+You can fine tunning the configuration process using the following switches
+with configure:
+
+User Option: --enable-gui[=yes|no]
+User Option: --disable-gui
+ Enables/disables the built of the MIX virtual machine GUI (gmixvm). If
+ the required libraries are missing (see section 1.2 Requirements) the
+ configure script with automatically disable this feature.
+
+User Option: --with-readline[=yes|no]
+User Option: --without-readline
+ Enables/disables the GNU Readline support for mixvm. If the required
+ libraries are missing (see section 1.2 Requirements) the configure
+ script with automatically disable this feature.
+
+
+1.6 Generic configure help
+--------------------------
+
+Basic Installation
+==================
+
+ For more information specific to this package, please read the README
+file. This source code distribution is autoconfiguring and you should be
+able to compile it and install it without manual interventions such as
+editing Makefiles, configuration files, and so on. These are generic
+instructions for people who are not familiar with installing autoconfiguring
+software.
+
+The simplest way to compile this package is to enter the source code
+main directory and do the following:
+
+ 1. Configure the source code by typing:
+ % sh ./configure
+
+ If you're planning to install the package into your home directory
+ or to a location other than `/usr/local' then add the flag
+ `--prefix=PATH' to `configure'. For example, if your home directory
+ is `/home/luser' you can configure the package to install itself there
+ by invoking:
+ % sh ./configure --prefix=/home/luser
+
+ While running, `configure' prints some messages telling which
+ features is it checking for.
+
+ 2. Compile the package by typing:
+ % make
+ Running `make' takes a while. If this is a very large package, now
+ is the time to go make some coffee.
+
+ 3. Some packages are bundled with self-tests for source-code
+ verification. If this package includes such tests, you can
+ optionally run them after compilation by typing
+ % make check
+
+ 4. Type `make install' to install the programs and any data files and
+ documentation. Type `make uninstall' to undo the installation.
+ During installation, the following files go to the following directories:
+ Executables -> /prefix/bin
+ Libraries -> /prefix/lib
+ Public header files -> /prefix/include
+ Man pages -> /prefix/man/man?
+ Info files -> /prefix/info
+ where `prefix' is either `/usr/local' or the PATH that you specified
+ in the `--prefix' flag.
+
+ If any of these directories do not presently exist, they will be
+ created on demand.
+
+ If you are installing in your home directory make sure that
+ `/home/luser/bin' is in your path. If you're using the bash shell
+ add this line at the end of your .cshrc file:
+ PATH="/home/luser/bin:${PATH}"
+ export PATH
+ If you are using csh or tcsh, then use this line instead:
+ setenv PATH /home/luser/bin:${PATH}
+ By prepending your home directory to the rest of the PATH you can
+ override systemwide installed software with your own custom installation.
+
+ 5. You can remove the program binaries and object files from the
+ source code directory by typing `make clean'. To also remove the
+ files that `configure' created (so you can compile the package for
+ a different kind of computer), type `make distclean'.
+
+Compiler configuration
+======================
+
+ The `configure' shell script is responsible for choosing and configuring
+the compiler(s).
+
+The following options allow you to specify whether you
+want to enable or disable various debugging mechanisms:
+
+`--with-warnings'
+ Make the compilers very picky about warnings. Try this whenever you
+ write new code since it may catch a few bugs. This is not active by
+ default because all too often warnings can be too picky and scare
+ the end-user.
+
+`--disable-assert'
+ Compile without using assertions. This results in faster code,
+ but should not be used during developerment, or to run `make check'
+ which depends on assertions. It should only be used for production
+ runs on code that you believe is bug free.
+
+All programs are compiled with optimization level 2 by default (-O2).
+Occasionally that confuses the debugger when code is inlined. To disable
+optimization and enable debugging, set the shell environment variables
+CFLAGS, CXXFLAGS, FFLAGS to `-g'. On the bash shell, you can do this
+like this:
+ $ export CFLAGS="-g"
+ $ export CXXFLAGS="-g"
+ $ export FFLAGS="-g"
+On the tcsh shell, use the `setenv' command instead:
+ % setenv CFLAGS "-g"
+ ...etc...
+For other shell, please consult your shell's documentation.
+
+Similarly, you can increase the optimization level by assigning these
+variables to "-g -O3".
+
+The following options allow you to reconsider the `configure' shell script's
+choice of Fortran compilers.
+
+`--with-f2c'
+ Compile the Fortran code by translating it to C, even if a native
+ Fortran compiler is available. A copy of the f2c translator should be
+ bundled in the distribution. It will be compiled and then used to
+ compile your Fortran code.
+`--with-g77'
+ Compile the Fortran code with g77 even if a proprietary Fortran
+ compiler is available
+`--with-f77=F77'
+ Compile the Fortran code with the specified Fortran compiler.
+
+Depending on what languages the package uses, some of these options may
+or may not be available. To see what is available, type:
+ % sh ./configure --help
+
+About the configure script
+==========================
+
+ The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation. It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions. Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, a file
+`config.cache' that saves the results of its tests to speed up
+reconfiguring, and a file `config.log' containing compiler output
+(useful mainly for debugging `configure').
+
+ If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release. If at some point `config.cache'
+contains results you don't want to keep, you may remove or edit it.
+
+ The file `configure.in' is used to create `configure' by a program
+called `autoconf'. You only need `configure.in' if you want to change
+it or regenerate `configure' using a newer version of `autoconf'.
+
+Advanced installation options.
+==============================
+
+ The `configure' script also understands the following more advanced
+options, to handle situations for which `--prefix' alone is not sufficient.
+
+ You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files. If you
+give `configure' the option `--exec-prefix=PATH', the package will use
+PATH as the prefix for installing programs and libraries.
+Documentation and other data files will still use the regular prefix.
+
+ In addition, if you use an unusual directory layout you can give
+options like `--bindir=PATH' to specify different values for particular
+kinds of files. Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them.
+
+ If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+Optional Features
+=================
+
+ Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System). The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+ For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+