From 300160e73da486946ae513f1d039dcd7b85ff17c Mon Sep 17 00:00:00 2001 From: Jose Antonio Ortega Ruiz Date: Mon, 20 Mar 2006 22:46:46 +0000 Subject: Version 1.2.1 imported git-archimport-id: mdk@sv.gnu.org/mdk--devel--1--patch-1 --- doc/gendocs.sh | 285 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 285 insertions(+) create mode 100755 doc/gendocs.sh (limited to 'doc/gendocs.sh') diff --git a/doc/gendocs.sh b/doc/gendocs.sh new file mode 100755 index 0000000..7b8a3ca --- /dev/null +++ b/doc/gendocs.sh @@ -0,0 +1,285 @@ +#!/bin/sh +# gendocs.sh -- generate a GNU manual in many formats. This script is +# mentioned in maintain.texi. See the help message below for usage details. +# $Id: gendocs.sh,v 1.4 2005/09/20 20:18:58 jao Exp $ +# +# Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, you can either send email to this +# program's maintainer or write to: The Free Software Foundation, +# Inc.; 51 Franklin Street, Fifth Floor; Boston, MA 02110-1301, USA. +# +# Original author: Mohit Agarwal. +# Send bug reports and any other correspondence to bug-texinfo@gnu.org. + +prog="`basename \"$0\"`" +srcdir=`pwd` + +scripturl="http://savannah.gnu.org/cgi-bin/viewcvs/texinfo/texinfo/util/gendocs.sh" +templateurl="http://savannah.gnu.org/cgi-bin/viewcvs/texinfo/texinfo/util/gendocs_template" + +: ${MAKEINFO="makeinfo"} +: ${TEXI2DVI="texi2dvi -t @finalout"} +: ${DVIPS="dvips"} +: ${DOCBOOK2TXT="docbook2txt"} +: ${DOCBOOK2HTML="docbook2html"} +: ${DOCBOOK2PDF="docbook2pdf"} +: ${DOCBOOK2PS="docbook2ps"} +: ${GENDOCS_TEMPLATE_DIR="."} +unset CDPATH + +rcs_revision='$Revision: 1.4 $' +rcs_version=`set - $rcs_revision; echo $2` +program=`echo $0 | sed -e 's!.*/!!'` +version="gendocs.sh $rcs_version + +Copyright (C) 2005 Free Software Foundation, Inc. +There is NO warranty. You may redistribute this software +under the terms of the GNU General Public License. +For more information about these matters, see the files named COPYING." + +usage="Usage: $prog [OPTION]... PACKAGE MANUAL-TITLE + +Generate various output formats from PACKAGE.texinfo (or .texi or .txi) source. +See the GNU Maintainers document for a more extensive discussion: + http://www.gnu.org/prep/maintain_toc.html + +Options: + -o OUTDIR write files into OUTDIR, instead of manual/. + --docbook convert to DocBook too (xml, txt, html, pdf and ps). + --html ARG pass indicated ARG to makeinfo for HTML targets. + --help display this help and exit successfully. + --version display version information and exit successfully. + +Simple example: $prog emacs \"GNU Emacs Manual\" + +Typical sequence: + cd YOURPACKAGESOURCE/doc + wget \"$scripturl\" + wget \"$templateurl\" + $prog YOURMANUAL \"GNU YOURMANUAL - One-line description\" + +Output will be in a new subdirectory \"manual\" (by default, use -o OUTDIR +to override). Move all the new files into your web CVS tree, as +explained in the Web Pages node of maintain.texi. + +MANUAL-TITLE is included as part of the HTML of the overall +manual/index.html file. It should include the name of the package being +documented. manual/index.html is created by substitution from the file +$GENDOCS_TEMPLATE_DIR/gendocs_template. (Feel free to modify the +generic template for your own purposes.) + +If you have several manuals, you'll need to run this script several +times with different YOURMANUAL values, specifying a different output +directory with -o each time. Then write (by hand) an overall index.html +with links to them all. + +You can set the environment variables MAKEINFO, TEXI2DVI, and DVIPS to +control the programs that get executed, and GENDOCS_TEMPLATE_DIR to +control where the gendocs_template file is looked for. + +Email bug reports or enhancement requests to bug-texinfo@gnu.org. +" + +calcsize() +{ + size="`ls -ksl $1 | awk '{print $1}'`" + echo $size +} + +outdir=manual +html= +PACKAGE= +MANUAL_TITLE= + +while test $# -gt 0; do + case $1 in + --help) echo "$usage"; exit 0;; + --version) echo "$version"; exit 0;; + -o) shift; outdir=$1;; + --docbook) docbook=yes;; + --html) shift; html=$1;; + -*) + echo "$0: Unknown or ambiguous option \`$1'." >&2 + echo "$0: Try \`--help' for more information." >&2 + exit 1;; + *) + if test -z "$PACKAGE"; then + PACKAGE=$1 + elif test -z "$MANUAL_TITLE"; then + MANUAL_TITLE=$1 + else + echo "$0: extra non-option argument \`$1'." >&2 + exit 1 + fi;; + esac + shift +done + +if test -s $srcdir/$PACKAGE.texinfo; then + srcfile=$srcdir/$PACKAGE.texinfo +elif test -s $srcdir/$PACKAGE.texi; then + srcfile=$srcdir/$PACKAGE.texi +elif test -s $srcdir/$PACKAGE.txi; then + srcfile=$srcdir/$PACKAGE.txi +else + echo "$0: cannot find .texinfo or .texi or .txi for $PACKAGE in $srcdir." >&2 + exit 1 +fi + +if test ! -r $GENDOCS_TEMPLATE_DIR/gendocs_template; then + echo "$0: cannot read $GENDOCS_TEMPLATE_DIR/gendocs_template." >&2 + echo "$0: it is available from $templateurl." >&2 + exit 1 +fi + +echo Generating output formats for $srcfile + +cmd="${MAKEINFO} -o $PACKAGE.info $srcfile" +echo "Generating info files... ($cmd)" +eval $cmd +mkdir -p $outdir/ +tar czf $outdir/$PACKAGE.info.tar.gz $PACKAGE.info* +info_tgz_size="`calcsize $outdir/$PACKAGE.info.tar.gz`" +# do not mv the info files, there's no point in having them available +# separately on the web. + +cmd="${TEXI2DVI} $srcfile" +echo "Generating dvi ... ($cmd)" +eval $cmd + +# now, before we compress dvi: +echo Generating postscript... +${DVIPS} $PACKAGE -o +gzip -f -9 $PACKAGE.ps +ps_gz_size="`calcsize $PACKAGE.ps.gz`" +mv $PACKAGE.ps.gz $outdir/ + +# compress/finish dvi: +gzip -f -9 $PACKAGE.dvi +dvi_gz_size="`calcsize $PACKAGE.dvi.gz`" +mv $PACKAGE.dvi.gz $outdir/ + +cmd="${TEXI2DVI} --pdf $srcfile" +echo "Generating pdf ... ($cmd)" +eval $cmd +pdf_size="`calcsize $PACKAGE.pdf`" +mv $PACKAGE.pdf $outdir/ + +cmd="${MAKEINFO} -o $PACKAGE.txt --no-split --no-headers $srcfile" +echo "Generating ASCII... ($cmd)" +eval $cmd +ascii_size="`calcsize $PACKAGE.txt`" +gzip -f -9 -c $PACKAGE.txt >$outdir/$PACKAGE.txt.gz +ascii_gz_size="`calcsize $outdir/$PACKAGE.txt.gz`" +mv $PACKAGE.txt $outdir/ + +cmd="${MAKEINFO} --no-split --html -o $PACKAGE.html $html $srcfile" +echo "Generating monolithic html... ($cmd)" +rm -rf $PACKAGE.html # in case a directory is left over +eval $cmd +html_mono_size="`calcsize $PACKAGE.html`" +gzip -f -9 -c $PACKAGE.html >$outdir/$PACKAGE.html.gz +html_mono_gz_size="`calcsize $outdir/$PACKAGE.html.gz`" +mv $PACKAGE.html $outdir/ + +cmd="${MAKEINFO} --html -o $PACKAGE.html $html $srcfile" +echo "Generating html by node... ($cmd)" +eval $cmd +split_html_dir=$PACKAGE.html +( + cd ${split_html_dir} || exit 1 + tar -czf ../$outdir/${PACKAGE}.html_node.tar.gz -- *.html +) +html_node_tgz_size="`calcsize $outdir/${PACKAGE}.html_node.tar.gz`" +rm -f $outdir/html_node/*.html +mkdir -p $outdir/html_node/ +mv ${split_html_dir}/*.html $outdir/html_node/ +rmdir ${split_html_dir} + +echo Making .tar.gz for sources... +srcfiles=`ls *.texinfo *.texi *.txi *.eps 2>/dev/null` +tar cvzfh $outdir/$PACKAGE.texi.tar.gz $srcfiles +texi_tgz_size="`calcsize $outdir/$PACKAGE.texi.tar.gz`" + +if test -n "$docbook"; then + cmd="${MAKEINFO} -o - --docbook $srcfile > ${srcdir}/$PACKAGE-db.xml" + echo "Generating docbook XML... $(cmd)" + eval $cmd + docbook_xml_size="`calcsize $PACKAGE-db.xml`" + gzip -f -9 -c $PACKAGE-db.xml >$outdir/$PACKAGE-db.xml.gz + docbook_xml_gz_size="`calcsize $outdir/$PACKAGE-db.xml.gz`" + mv $PACKAGE-db.xml $outdir/ + + cmd="${DOCBOOK2HTML} -o $split_html_db_dir ${outdir}/$PACKAGE-db.xml" + echo "Generating docbook HTML... ($cmd)" + eval $cmd + split_html_db_dir=html_node_db + ( + cd ${split_html_db_dir} || exit 1 + tar -czf ../$outdir/${PACKAGE}.html_node_db.tar.gz -- *.html + ) + html_node_db_tgz_size="`calcsize $outdir/${PACKAGE}.html_node_db.tar.gz`" + rm -f $outdir/html_node_db/*.html + mkdir -p $outdir/html_node_db + mv ${split_html_db_dir}/*.html $outdir/html_node_db/ + rmdir ${split_html_db_dir} + + cmd="${DOCBOOK2TXT} ${outdir}/$PACKAGE-db.xml" + echo "Generating docbook ASCII... ($cmd)" + eval $cmd + docbook_ascii_size="`calcsize $PACKAGE-db.txt`" + mv $PACKAGE-db.txt $outdir/ + + cmd="${DOCBOOK2PS} ${outdir}/$PACKAGE-db.xml" + echo "Generating docbook PS... $(cmd)" + eval $cmd + gzip -f -9 -c $PACKAGE-db.ps >$outdir/$PACKAGE-db.ps.gz + docbook_ps_gz_size="`calcsize $outdir/$PACKAGE-db.ps.gz`" + mv $PACKAGE-db.ps $outdir/ + + cmd="${DOCBOOK2PDF} ${outdir}/$PACKAGE-db.xml" + echo "Generating docbook PDF... ($cmd)" + eval $cmd + docbook_pdf_size="`calcsize $PACKAGE-db.pdf`" + mv $PACKAGE-db.pdf $outdir/ +fi + +echo Writing index file... +curdate="`date '+%B %d, %Y'`" +sed \ + -e "s!%%TITLE%%!$MANUAL_TITLE!g" \ + -e "s!%%DATE%%!$curdate!g" \ + -e "s!%%PACKAGE%%!$PACKAGE!g" \ + -e "s!%%HTML_MONO_SIZE%%!$html_mono_size!g" \ + -e "s!%%HTML_MONO_GZ_SIZE%%!$html_mono_gz_size!g" \ + -e "s!%%HTML_NODE_TGZ_SIZE%%!$html_node_tgz_size!g" \ + -e "s!%%INFO_TGZ_SIZE%%!$info_tgz_size!g" \ + -e "s!%%DVI_GZ_SIZE%%!$dvi_gz_size!g" \ + -e "s!%%PDF_SIZE%%!$pdf_size!g" \ + -e "s!%%PS_GZ_SIZE%%!$ps_gz_size!g" \ + -e "s!%%ASCII_SIZE%%!$ascii_size!g" \ + -e "s!%%ASCII_GZ_SIZE%%!$ascii_gz_size!g" \ + -e "s!%%TEXI_TGZ_SIZE%%!$texi_tgz_size!g" \ + -e "s!%%DOCBOOK_HTML_NODE_TGZ_SIZE%%!$html_node_db_tgz_size!g" \ + -e "s!%%DOCBOOK_ASCII_SIZE%%!$docbook_ascii_size!g" \ + -e "s!%%DOCBOOK_PS_GZ_SIZE%%!$docbook_ps_gz_size!g" \ + -e "s!%%DOCBOOK_PDF_SIZE%%!$docbook_pdf_size!g" \ + -e "s!%%DOCBOOK_XML_SIZE%%!$docbook_xml_size!g" \ + -e "s!%%DOCBOOK_XML_GZ_SIZE%%!$docbook_xml_gz_size!g" \ + -e "s,%%SCRIPTURL%%,$scripturl,g" \ + -e "s!%%SCRIPTNAME%%!$prog!g" \ +$GENDOCS_TEMPLATE_DIR/gendocs_template >$outdir/index.html + +echo "Done! See $outdir/ subdirectory for new files." -- cgit v1.2.3