#!/bin/sh
# gendocs.sh -- generate a GNU manual in many formats. This script is
# mentioned in maintain.texi. See the help message below for usage details.
scriptversion=2008-03-05.14
# Copyright (C) 2003, 2004, 2005, 2006, 2007, 2008
# Free Software Foundation, Inc.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License,
# or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see .
#
# Original author: Mohit Agarwal.
# Send bug reports and any other correspondence to bug-texinfo@gnu.org.
prog=`basename "$0"`
srcdir=`pwd`
scripturl="http://savannah.gnu.org/cgi-bin/viewcvs/~checkout~/texinfo/texinfo/util/gendocs.sh"
templateurl="http://savannah.gnu.org/cgi-bin/viewcvs/~checkout~/texinfo/texinfo/util/gendocs_template"
: ${SETLANG="env LANG= LC_MESSAGES= LC_ALL= LANGUAGE="}
: ${MAKEINFO="makeinfo"}
: ${TEXI2DVI="texi2dvi -t @finalout"}
: ${DVIPS="dvips"}
: ${DOCBOOK2HTML="docbook2html"}
: ${DOCBOOK2PDF="docbook2pdf"}
: ${DOCBOOK2PS="docbook2ps"}
: ${DOCBOOK2TXT="docbook2txt"}
: ${GENDOCS_TEMPLATE_DIR="."}
: ${TEXI2HTML="texi2html"}
unset CDPATH
unset use_texi2html
version="gendocs.sh $scriptversion
Copyright (C) 2007 Free Software Foundation, Inc.
There is NO warranty. You may redistribute this software
under the terms of the GNU General Public License.
For more information about these matters, see the files named COPYING."
usage="Usage: $prog [OPTION]... PACKAGE MANUAL-TITLE
Generate various output formats from PACKAGE.texinfo (or .texi or .txi) source.
See the GNU Maintainers document for a more extensive discussion:
http://www.gnu.org/prep/maintain_toc.html
Options:
-o OUTDIR write files into OUTDIR, instead of manual/.
--docbook convert to DocBook too (xml, txt, html, pdf and ps).
--html ARG pass indicated ARG to makeinfo or texi2html for HTML targets.
--texi2html use texi2html to generate HTML targets.
--help display this help and exit successfully.
--version display version information and exit successfully.
Simple example: $prog emacs \"GNU Emacs Manual\"
Typical sequence:
cd YOURPACKAGESOURCE/doc
wget \"$scripturl\"
wget \"$templateurl\"
$prog YOURMANUAL \"GNU YOURMANUAL - One-line description\"
Output will be in a new subdirectory \"manual\" (by default, use -o OUTDIR
to override). Move all the new files into your web CVS tree, as
explained in the Web Pages node of maintain.texi.
MANUAL-TITLE is included as part of the HTML
of the overall
manual/index.html file. It should include the name of the package being
documented. manual/index.html is created by substitution from the file
$GENDOCS_TEMPLATE_DIR/gendocs_template. (Feel free to modify the
generic template for your own purposes.)
If you have several manuals, you'll need to run this script several
times with different YOURMANUAL values, specifying a different output
directory with -o each time. Then write (by hand) an overall index.html
with links to them all.
If a manual's texinfo sources are spread across several directories,
first copy or symlink all Texinfo sources into a single directory.
(Part of the script's work is to make a tar.gz of the sources.)
You can set the environment variables MAKEINFO, TEXI2DVI, and DVIPS to
control the programs that get executed, and GENDOCS_TEMPLATE_DIR to
control where the gendocs_template file is looked for. (With --docbook,
the environment variables DOCBOOK2HTML, DOCBOOK2PDF, DOCBOOK2PS, and
DOCBOOK2TXT are also respected.)
By default, makeinfo is run in the default (English) locale, since
that's the language of most Texinfo manuals. If you happen to have a
non-English manual and non-English web site, check the SETLANG setting
in the source.
Email bug reports or enhancement requests to bug-texinfo@gnu.org.
"
calcsize()
{
size=`ls -ksl $1 | awk '{print $1}'`
echo $size
}
outdir=manual
html=
PACKAGE=
MANUAL_TITLE=
while test $# -gt 0; do
case $1 in
--help) echo "$usage"; exit 0;;
--version) echo "$version"; exit 0;;
-o) shift; outdir=$1;;
--docbook) docbook=yes;;
--html) shift; html=$1;;
--texi2html) use_texi2html=1;;
-*)
echo "$0: Unknown or ambiguous option \`$1'." >&2
echo "$0: Try \`--help' for more information." >&2
exit 1;;
*)
if test -z "$PACKAGE"; then
PACKAGE=$1
elif test -z "$MANUAL_TITLE"; then
MANUAL_TITLE=$1
else
echo "$0: extra non-option argument \`$1'." >&2
exit 1
fi;;
esac
shift
done
if test -s "$srcdir/$PACKAGE.texinfo"; then
srcfile=$srcdir/$PACKAGE.texinfo
elif test -s "$srcdir/$PACKAGE.texi"; then
srcfile=$srcdir/$PACKAGE.texi
elif test -s "$srcdir/$PACKAGE.txi"; then
srcfile=$srcdir/$PACKAGE.txi
else
echo "$0: cannot find .texinfo or .texi or .txi for $PACKAGE in $srcdir." >&2
exit 1
fi
if test ! -r $GENDOCS_TEMPLATE_DIR/gendocs_template; then
echo "$0: cannot read $GENDOCS_TEMPLATE_DIR/gendocs_template." >&2
echo "$0: it is available from $templateurl." >&2
exit 1
fi
echo Generating output formats for $srcfile
cmd="$SETLANG $MAKEINFO -o $PACKAGE.info \"$srcfile\""
echo "Generating info files... ($cmd)"
eval "$cmd"
mkdir -p $outdir/
tar czf $outdir/$PACKAGE.info.tar.gz $PACKAGE.info*
info_tgz_size=`calcsize $outdir/$PACKAGE.info.tar.gz`
# do not mv the info files, there's no point in having them available
# separately on the web.
cmd="${TEXI2DVI} \"$srcfile\""
echo "Generating dvi ... ($cmd)"
eval "$cmd"
# now, before we compress dvi:
echo Generating postscript...
${DVIPS} $PACKAGE -o
gzip -f -9 $PACKAGE.ps
ps_gz_size=`calcsize $PACKAGE.ps.gz`
mv $PACKAGE.ps.gz $outdir/
# compress/finish dvi:
gzip -f -9 $PACKAGE.dvi
dvi_gz_size=`calcsize $PACKAGE.dvi.gz`
mv $PACKAGE.dvi.gz $outdir/
cmd="${TEXI2DVI} --pdf \"$srcfile\""
echo "Generating pdf ... ($cmd)"
eval "$cmd"
pdf_size=`calcsize $PACKAGE.pdf`
mv $PACKAGE.pdf $outdir/
cmd="$SETLANG $MAKEINFO -o $PACKAGE.txt --no-split --no-headers \"$srcfile\""
echo "Generating ASCII... ($cmd)"
eval "$cmd"
ascii_size=`calcsize $PACKAGE.txt`
gzip -f -9 -c $PACKAGE.txt >$outdir/$PACKAGE.txt.gz
ascii_gz_size=`calcsize $outdir/$PACKAGE.txt.gz`
mv $PACKAGE.txt $outdir/
html_split() {
cmd="$SETLANG $TEXI2HTML --output $PACKAGE.html --split=$1 $html --node-files \"$srcfile\""
echo "Generating html by $1... ($cmd)"
eval "$cmd"
split_html_dir=$PACKAGE.html
(
cd ${split_html_dir} || exit 1
ln -sf ${PACKAGE}.html index.html
tar -czf ../$outdir/${PACKAGE}.html_$1.tar.gz -- *.html
)
eval html_$1_tgz_size=`calcsize $outdir/${PACKAGE}.html_$1.tar.gz`
rm -f $outdir/html_$1/*.html
mkdir -p $outdir/html_$1/
mv ${split_html_dir}/*.html $outdir/html_$1/
rmdir ${split_html_dir}
}
if test -z "$use_texi2html"; then
cmd="$SETLANG $MAKEINFO --no-split --html -o $PACKAGE.html $html \"$srcfile\""
echo "Generating monolithic html... ($cmd)"
rm -rf $PACKAGE.html # in case a directory is left over
eval "$cmd"
html_mono_size=`calcsize $PACKAGE.html`
gzip -f -9 -c $PACKAGE.html >$outdir/$PACKAGE.html.gz
html_mono_gz_size=`calcsize $outdir/$PACKAGE.html.gz`
mv $PACKAGE.html $outdir/
cmd="$SETLANG $MAKEINFO --html -o $PACKAGE.html $html \"$srcfile\""
echo "Generating html by node... ($cmd)"
eval "$cmd"
split_html_dir=$PACKAGE.html
(
cd ${split_html_dir} || exit 1
tar -czf ../$outdir/${PACKAGE}.html_node.tar.gz -- *.html
)
html_node_tgz_size=`calcsize $outdir/${PACKAGE}.html_node.tar.gz`
rm -f $outdir/html_node/*.html
mkdir -p $outdir/html_node/
mv ${split_html_dir}/*.html $outdir/html_node/
rmdir ${split_html_dir}
else
cmd="$SETLANG $TEXI2HTML --output $PACKAGE.html $html \"$srcfile\""
echo "Generating monolithic html... ($cmd)"
rm -rf $PACKAGE.html # in case a directory is left over
eval "$cmd"
html_mono_size=`calcsize $PACKAGE.html`
gzip -f -9 -c $PACKAGE.html >$outdir/$PACKAGE.html.gz
html_mono_gz_size=`calcsize $outdir/$PACKAGE.html.gz`
mv $PACKAGE.html $outdir/
html_split node
html_split chapter
html_split section
fi
echo Making .tar.gz for sources...
srcfiles=`ls *.texinfo *.texi *.txi *.eps 2>/dev/null`
tar cvzfh $outdir/$PACKAGE.texi.tar.gz $srcfiles
texi_tgz_size=`calcsize $outdir/$PACKAGE.texi.tar.gz`
if test -n "$docbook"; then
cmd="$SETLANG $MAKEINFO -o - --docbook \"$srcfile\" > ${srcdir}/$PACKAGE-db.xml"
echo "Generating docbook XML... $(cmd)"
eval "$cmd"
docbook_xml_size=`calcsize $PACKAGE-db.xml`
gzip -f -9 -c $PACKAGE-db.xml >$outdir/$PACKAGE-db.xml.gz
docbook_xml_gz_size=`calcsize $outdir/$PACKAGE-db.xml.gz`
mv $PACKAGE-db.xml $outdir/
cmd="${DOCBOOK2HTML} -o $split_html_db_dir ${outdir}/$PACKAGE-db.xml"
echo "Generating docbook HTML... ($cmd)"
eval "$cmd"
split_html_db_dir=html_node_db
(
cd ${split_html_db_dir} || exit 1
tar -czf ../$outdir/${PACKAGE}.html_node_db.tar.gz -- *.html
)
html_node_db_tgz_size=`calcsize $outdir/${PACKAGE}.html_node_db.tar.gz`
rm -f $outdir/html_node_db/*.html
mkdir -p $outdir/html_node_db
mv ${split_html_db_dir}/*.html $outdir/html_node_db/
rmdir ${split_html_db_dir}
cmd="${DOCBOOK2TXT} ${outdir}/$PACKAGE-db.xml"
echo "Generating docbook ASCII... ($cmd)"
eval "$cmd"
docbook_ascii_size=`calcsize $PACKAGE-db.txt`
mv $PACKAGE-db.txt $outdir/
cmd="${DOCBOOK2PS} ${outdir}/$PACKAGE-db.xml"
echo "Generating docbook PS... $(cmd)"
eval "$cmd"
gzip -f -9 -c $PACKAGE-db.ps >$outdir/$PACKAGE-db.ps.gz
docbook_ps_gz_size=`calcsize $outdir/$PACKAGE-db.ps.gz`
mv $PACKAGE-db.ps $outdir/
cmd="${DOCBOOK2PDF} ${outdir}/$PACKAGE-db.xml"
echo "Generating docbook PDF... ($cmd)"
eval "$cmd"
docbook_pdf_size=`calcsize $PACKAGE-db.pdf`
mv $PACKAGE-db.pdf $outdir/
fi
echo Writing index file...
if test -z "$use_texi2html"; then
CONDS="/%%IF *HTML_SECTION%%/,/%%ENDIF *HTML_SECTION%%/d;\
/%%IF *HTML_CHAPTER%%/,/%%ENDIF *HTML_CHAPTER%%/d"
else
CONDS="/%%ENDIF.*%%/d;/%%IF *HTML_SECTION%%/d;/%%IF *HTML_CHAPTER%%/d"
fi
curdate=`$SETLANG date '+%B %d, %Y'`
sed \
-e "s!%%TITLE%%!$MANUAL_TITLE!g" \
-e "s!%%DATE%%!$curdate!g" \
-e "s!%%PACKAGE%%!$PACKAGE!g" \
-e "s!%%HTML_MONO_SIZE%%!$html_mono_size!g" \
-e "s!%%HTML_MONO_GZ_SIZE%%!$html_mono_gz_size!g" \
-e "s!%%HTML_NODE_TGZ_SIZE%%!$html_node_tgz_size!g" \
-e "s!%%HTML_SECTION_TGZ_SIZE%%!$html_section_tgz_size!g" \
-e "s!%%HTML_CHAPTER_TGZ_SIZE%%!$html_chapter_tgz_size!g" \
-e "s!%%INFO_TGZ_SIZE%%!$info_tgz_size!g" \
-e "s!%%DVI_GZ_SIZE%%!$dvi_gz_size!g" \
-e "s!%%PDF_SIZE%%!$pdf_size!g" \
-e "s!%%PS_GZ_SIZE%%!$ps_gz_size!g" \
-e "s!%%ASCII_SIZE%%!$ascii_size!g" \
-e "s!%%ASCII_GZ_SIZE%%!$ascii_gz_size!g" \
-e "s!%%TEXI_TGZ_SIZE%%!$texi_tgz_size!g" \
-e "s!%%DOCBOOK_HTML_NODE_TGZ_SIZE%%!$html_node_db_tgz_size!g" \
-e "s!%%DOCBOOK_ASCII_SIZE%%!$docbook_ascii_size!g" \
-e "s!%%DOCBOOK_PS_GZ_SIZE%%!$docbook_ps_gz_size!g" \
-e "s!%%DOCBOOK_PDF_SIZE%%!$docbook_pdf_size!g" \
-e "s!%%DOCBOOK_XML_SIZE%%!$docbook_xml_size!g" \
-e "s!%%DOCBOOK_XML_GZ_SIZE%%!$docbook_xml_gz_size!g" \
-e "s,%%SCRIPTURL%%,$scripturl,g" \
-e "s!%%SCRIPTNAME%%!$prog!g" \
-e "$CONDS" \
$GENDOCS_TEMPLATE_DIR/gendocs_template >$outdir/index.html
echo "Done! See $outdir/ subdirectory for new files."
# Local variables:
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-end: "$"
# End: