diff options
-rw-r--r-- | doc/plugins.org | 229 | ||||
-rw-r--r-- | doc/window-managers.org | 224 |
2 files changed, 228 insertions, 225 deletions
diff --git a/doc/plugins.org b/doc/plugins.org index 0d61b5f..052ff6f 100644 --- a/doc/plugins.org +++ b/doc/plugins.org @@ -35,6 +35,10 @@ 100 #+end_src + See also [[./window-managers.org][Interfacing with window managers]] for a collection of + plugins that let you interact and control xmobar from window + managers. + *** Icon Patterns Some monitors allow usage of strings that depend on some integer @@ -1274,231 +1278,6 @@ Run UVMeter "Brisbane" ["-H", "3", "-L", "3", "--low", "green", "--high", "red"] 900 #+end_src -* Interfacing with Window Managers - - Listed below are ways to interface xmobar with your window manager - of choice. - -*** Property-based Logging -***** =XMonadLog= - - - Aliases to XMonadLog - - - Displays information from xmonad's =_XMONAD_LOG=. You can use - this by using functions from the [[https://hackage.haskell.org/package/xmonad-contrib-0.16/docs/XMonad-Hooks-DynamicLog.html][XMonad.Hooks.DynamicLog]] - module. By using the =xmonadPropLog= function in your logHook, - you can write the the above property. The following shows a - minimal xmonad configuration that spawns xmobar and then - writes to the =_XMONAD_LOG= property. - - #+begin_src haskell - main = do - spawn "xmobar" - xmonad $ def - { logHook = dynamicLogString defaultPP >>= xmonadPropLog - } - #+end_src - - This plugin can be used as a sometimes more convenient - alternative to =StdinReader=. For instance, it allows you to - (re)start xmobar outside xmonad. - -***** =UnsafeXMonadLog= - - - Aliases to UnsafeXMonadLog - - Displays any text received by xmobar on the =_XMONAD_LOG= atom. - - Will not do anything to the text received. This means you can pass - xmobar dynamic actions. Be careful to escape (using =<raw=…>=) or - remove tags from dynamic text that you pipe through to xmobar in this - way. - - - Sample usage: Send the list of your workspaces, enclosed by actions - tags, to xmobar. This enables you to switch to a workspace when you - click on it in xmobar! - - #+begin_src shell - <action=`xdotool key alt+1`>ws1</action> <action=`xdotool key alt+1`>ws2</action> - #+end_src - - - If you use xmonad, It is advised that you still use =xmobarStrip= for - the =ppTitle= in your logHook: - - #+begin_src haskell - myPP = defaultPP { ppTitle = xmobarStrip } - main = xmonad $ def - { logHook = dynamicLogString myPP >>= xmonadPropLog - } - #+end_src - -***** =XPropertyLog PropName= - - - Aliases to =PropName= - - Reads the X property named by =PropName= (a string) and displays its - value. The [[https://github.com/jaor/xmobar/raw/master/examples/xmonadpropwrite.hs][examples/xmonadpropwrite.hs script]] in xmobar's distribution - can be used to set the given property from the output of any other - program or script. - -***** =UnsafeXPropertyLog PropName= - - - Aliases to =PropName= - - Same as =XPropertyLog= but the input is not filtered to avoid - injection of actions (cf. =UnsafeXMonadLog=). The program writing the - value of the read property is responsible of performing any needed - cleanups. - -***** =NamedXPropertyLog PropName Alias= - - - Aliases to =Alias= - - Same as =XPropertyLog= but a custom alias can be specified. - -***** =UnsafeNamedXPropertyLog PropName Alias= - - - Aliases to =Alias= - - Same as =UnsafeXPropertyLog=, but a custom alias can be specified. - -*** Logging via Stdin -***** =StdinReader= - - - Aliases to StdinReader - - Displays any text received by xmobar on its standard input. - - Strips actions from the text received. This means you can't pass - dynamic actions via stdin. This is safer than =UnsafeStdinReader= - because there is no need to escape the content before passing it to - xmobar's standard input. - -***** =UnsafeStdinReader= - - - Aliases to UnsafeStdinReader - - Displays any text received by xmobar on its standard input. - - Similar to [[=UnsafeXMonadLog=][UnsafeXMonadLog]], in the sense that it does not strip any - actions from the received text, only using =stdin= and not a property - atom of the root window. Please be equally carefully when using this - as when using =UnsafeXMonadLog=! - -*** Pipe-based Logging -***** =PipeReader "default text:/path/to/pipe" Alias= - - - Reads its displayed output from the given pipe. - - Prefix an optional default text separated by a colon - - Expands environment variables in the first argument of syntax =${VAR}= - or =$VAR= - -***** =MarqueePipeReader "default text:/path/to/pipe" (length, rate, sep) Alias= - - - Generally equivalent to PipeReader - - - Text is displayed as marquee with the specified length, rate in 10th - seconds and separator when it wraps around - - #+begin_src haskell - Run MarqueePipeReader "/tmp/testpipe" (10, 7, "+") "mpipe" - #+end_src - - - Expands environment variables in the first argument - -***** =BufferedPipeReader Alias [(Timeout, Bool, "/path/to/pipe1"), ..]= - - - Display data from multiple pipes. - - - Timeout (in tenth of seconds) is the value after which the - previous content is restored i.e. if there was already - something from a previous pipe it will be put on display - again, overwriting the current status. - - - A pipe with Timeout of 0 will be displayed permanently, just - like =PipeReader= - - - The boolean option indicates whether new data for this pipe - should make xmobar appear (unhide, reveal). In this case, the - Timeout additionally specifies when the window should be - hidden again. The output is restored in any case. - - - Use it for OSD-like status bars e.g. for setting the volume or - brightness: - - #+begin_src haskell - Run BufferedPipeReader "bpr" - [ ( 0, False, "/tmp/xmobar_window" ) - , ( 15, True, "/tmp/xmobar_status" ) - ] - #+end_src - - Have your window manager send window titles to - =/tmp/xmobar_window=. They will always be shown and not reveal - your xmobar. Sending some status information to - =/tmp/xmobar_status= will reveal xmonad for 1.5 seconds and - temporarily overwrite the window titles. - - - Take a look at [[http://github.com/jaor/xmobar/raw/master/examples/status.sh][examples/status.sh]] - - - Expands environment variables for the pipe path - -*** Handle-based Logging -***** =HandleReader Handle Alias= - - - Display data from a Haskell =Handle= - - - This plugin is only useful if you are running xmobar from another - Haskell program like XMonad. - - - You can use =System.Process.createPipe= to create a pair of =read= & - =write= Handles. Pass the =read= Handle to HandleReader and write your - output to the =write= Handle: - - #+begin_src haskell - (readHandle, writeHandle) <- createPipe - xmobarProcess <- forkProcess $ xmobar myConfig - { commands = - Run (HandleReader readHandle "handle") : commands myConfig - } - hPutStr writeHandle "Hello World" - #+end_src - -*** Software Transactional Memory - - When invoking xmobar from other Haskell code it can be easier and - more performant to use shared memory. The following plugins - leverage =Control.Concurrent.STM= to realize these gains for xmobar. - -***** =QueueReader (TQueue a) (a -> String) String= - - - Display data from a Haskell =TQueue a=. - - - This plugin is only useful if you are running xmobar from another - haskell program like xmonad. - - - You should make an =IO= safe =TQueue a= with - =Control.Concurrent.STM.newTQueueIO=. Write to it from the user - code with =writeTQueue=, and read with =readTQueue=. A common use - is to overwite =ppOutput= from =XMonad.Hooks.DynamicLog= as shown - below. - - #+begin_src haskell - main :: IO () - main = do - q <- STM.newTQueueIO @String - bar <- forkIO $ xmobar myConf - { commands = Run (QueueReader q id "XMonadLog") : commands myConf } - xmonad $ def { logHook = logWorkspacesToQueue q } - - logWorkspacesToQueue :: STM.TQueue String -> X () - logWorkspacesToQueue q = - dynamicLogWithPP def { ppOutput = STM.atomically . STM.writeTQueue q } - where - -- Manage the PrettyPrinting configuration here. - ppLayout' :: String -> String - ppLayout' "Spacing Tall" = xpm "layout-spacing-tall" - ppLayout' "Spacing Mirror Tall" = xpm "layout-spacing-mirror" - ppLayout' "Spacing Full" = xpm "layout-full" - ppLayout' x = x - - icon :: String -> String - icon path = "<icon=" ++ path ++ "/>" - - xpm :: String -> String - xpm = icon . (++ ".xpm") - #+end_src - * Executing External Commands In order to execute an external command you can either write the diff --git a/doc/window-managers.org b/doc/window-managers.org new file mode 100644 index 0000000..3a194c8 --- /dev/null +++ b/doc/window-managers.org @@ -0,0 +1,224 @@ +#+title: Interfacing with window managers + +Listed below are ways to interface xmobar with your window manager of +choice. + +*** Property-based Logging +***** =XMonadLog= + + - Aliases to XMonadLog + + - Displays information from xmonad's =_XMONAD_LOG=. You can use + this by using functions from the [[https://hackage.haskell.org/package/xmonad-contrib-0.16/docs/XMonad-Hooks-DynamicLog.html][XMonad.Hooks.DynamicLog]] + module. By using the =xmonadPropLog= function in your logHook, + you can write the the above property. The following shows a + minimal xmonad configuration that spawns xmobar and then + writes to the =_XMONAD_LOG= property. + + #+begin_src haskell + main = do + spawn "xmobar" + xmonad $ def + { logHook = dynamicLogString defaultPP >>= xmonadPropLog + } + #+end_src + + This plugin can be used as a sometimes more convenient + alternative to =StdinReader=. For instance, it allows you to + (re)start xmobar outside xmonad. + +***** =UnsafeXMonadLog= + + - Aliases to UnsafeXMonadLog + - Displays any text received by xmobar on the =_XMONAD_LOG= atom. + - Will not do anything to the text received. This means you can pass + xmobar dynamic actions. Be careful to escape (using =<raw=…>=) or + remove tags from dynamic text that you pipe through to xmobar in this + way. + + - Sample usage: Send the list of your workspaces, enclosed by actions + tags, to xmobar. This enables you to switch to a workspace when you + click on it in xmobar! + + #+begin_src shell + <action=`xdotool key alt+1`>ws1</action> <action=`xdotool key alt+1`>ws2</action> + #+end_src + + - If you use xmonad, It is advised that you still use =xmobarStrip= for + the =ppTitle= in your logHook: + + #+begin_src haskell + myPP = defaultPP { ppTitle = xmobarStrip } + main = xmonad $ def + { logHook = dynamicLogString myPP >>= xmonadPropLog + } + #+end_src + +***** =XPropertyLog PropName= + + - Aliases to =PropName= + - Reads the X property named by =PropName= (a string) and displays its + value. The [[https://github.com/jaor/xmobar/raw/master/examples/xmonadpropwrite.hs][examples/xmonadpropwrite.hs script]] in xmobar's distribution + can be used to set the given property from the output of any other + program or script. + +***** =UnsafeXPropertyLog PropName= + + - Aliases to =PropName= + - Same as =XPropertyLog= but the input is not filtered to avoid + injection of actions (cf. =UnsafeXMonadLog=). The program writing the + value of the read property is responsible of performing any needed + cleanups. + +***** =NamedXPropertyLog PropName Alias= + + - Aliases to =Alias= + - Same as =XPropertyLog= but a custom alias can be specified. + +***** =UnsafeNamedXPropertyLog PropName Alias= + + - Aliases to =Alias= + - Same as =UnsafeXPropertyLog=, but a custom alias can be specified. + +*** Logging via Stdin +***** =StdinReader= + + - Aliases to StdinReader + - Displays any text received by xmobar on its standard input. + - Strips actions from the text received. This means you can't pass + dynamic actions via stdin. This is safer than =UnsafeStdinReader= + because there is no need to escape the content before passing it to + xmobar's standard input. + +***** =UnsafeStdinReader= + + - Aliases to UnsafeStdinReader + - Displays any text received by xmobar on its standard input. + - Similar to [[=UnsafeXMonadLog=][UnsafeXMonadLog]], in the sense that it does not strip any + actions from the received text, only using =stdin= and not a property + atom of the root window. Please be equally carefully when using this + as when using =UnsafeXMonadLog=! + +*** Pipe-based Logging +***** =PipeReader "default text:/path/to/pipe" Alias= + + - Reads its displayed output from the given pipe. + - Prefix an optional default text separated by a colon + - Expands environment variables in the first argument of syntax =${VAR}= + or =$VAR= + +***** =MarqueePipeReader "default text:/path/to/pipe" (length, rate, sep) Alias= + + - Generally equivalent to PipeReader + + - Text is displayed as marquee with the specified length, rate in 10th + seconds and separator when it wraps around + + #+begin_src haskell + Run MarqueePipeReader "/tmp/testpipe" (10, 7, "+") "mpipe" + #+end_src + + - Expands environment variables in the first argument + +***** =BufferedPipeReader Alias [(Timeout, Bool, "/path/to/pipe1"), ..]= + + - Display data from multiple pipes. + + - Timeout (in tenth of seconds) is the value after which the + previous content is restored i.e. if there was already + something from a previous pipe it will be put on display + again, overwriting the current status. + + - A pipe with Timeout of 0 will be displayed permanently, just + like =PipeReader= + + - The boolean option indicates whether new data for this pipe + should make xmobar appear (unhide, reveal). In this case, the + Timeout additionally specifies when the window should be + hidden again. The output is restored in any case. + + - Use it for OSD-like status bars e.g. for setting the volume or + brightness: + + #+begin_src haskell + Run BufferedPipeReader "bpr" + [ ( 0, False, "/tmp/xmobar_window" ) + , ( 15, True, "/tmp/xmobar_status" ) + ] + #+end_src + + Have your window manager send window titles to + =/tmp/xmobar_window=. They will always be shown and not reveal + your xmobar. Sending some status information to + =/tmp/xmobar_status= will reveal xmonad for 1.5 seconds and + temporarily overwrite the window titles. + + - Take a look at [[http://github.com/jaor/xmobar/raw/master/examples/status.sh][examples/status.sh]] + + - Expands environment variables for the pipe path + +*** Handle-based Logging +***** =HandleReader Handle Alias= + + - Display data from a Haskell =Handle= + + - This plugin is only useful if you are running xmobar from another + Haskell program like XMonad. + + - You can use =System.Process.createPipe= to create a pair of =read= & + =write= Handles. Pass the =read= Handle to HandleReader and write your + output to the =write= Handle: + + #+begin_src haskell + (readHandle, writeHandle) <- createPipe + xmobarProcess <- forkProcess $ xmobar myConfig + { commands = + Run (HandleReader readHandle "handle") : commands myConfig + } + hPutStr writeHandle "Hello World" + #+end_src + +*** Software Transactional Memory + + When invoking xmobar from other Haskell code it can be easier and + more performant to use shared memory. The following plugins + leverage =Control.Concurrent.STM= to realize these gains for xmobar. + +***** =QueueReader (TQueue a) (a -> String) String= + + - Display data from a Haskell =TQueue a=. + + - This plugin is only useful if you are running xmobar from another + haskell program like xmonad. + + - You should make an =IO= safe =TQueue a= with + =Control.Concurrent.STM.newTQueueIO=. Write to it from the user + code with =writeTQueue=, and read with =readTQueue=. A common use + is to overwite =ppOutput= from =XMonad.Hooks.DynamicLog= as shown + below. + + #+begin_src haskell + main :: IO () + main = do + q <- STM.newTQueueIO @String + bar <- forkIO $ xmobar myConf + { commands = Run (QueueReader q id "XMonadLog") : commands myConf } + xmonad $ def { logHook = logWorkspacesToQueue q } + + logWorkspacesToQueue :: STM.TQueue String -> X () + logWorkspacesToQueue q = + dynamicLogWithPP def { ppOutput = STM.atomically . STM.writeTQueue q } + where + -- Manage the PrettyPrinting configuration here. + ppLayout' :: String -> String + ppLayout' "Spacing Tall" = xpm "layout-spacing-tall" + ppLayout' "Spacing Mirror Tall" = xpm "layout-spacing-mirror" + ppLayout' "Spacing Full" = xpm "layout-full" + ppLayout' x = x + + icon :: String -> String + icon path = "<icon=" ++ path ++ "/>" + + xpm :: String -> String + xpm = icon . (++ ".xpm") + #+end_src |