diff options
Diffstat (limited to 'README')
| -rw-r--r-- | README | 76 |
1 files changed, 47 insertions, 29 deletions
@@ -310,7 +310,7 @@ Monitors have default aliases. `Weather StationID Args RefreshRate` - aliases to the Station ID: so `Weather "LIPB" []` can be used in template as `%LIPB%` -- Args: the argument list (see below) +- Args: default monitor arguments (see below) - Variables that can be used with the `-t`/`--template` argument: `station`, `stationState`, `year`, `month`, `day`, `hour`, `wind`, `visibility`, `skyCondition`, `tempC`, `tempF`, @@ -321,8 +321,9 @@ Monitors have default aliases. `Network Interface Args RefreshRate` -- aliases to the interface name: so `Network "eth0" []` can be used as `%eth0%` -- Args: the argument list (see below) +- aliases to the interface name: so `Network "eth0" []` can be used as + `%eth0%` +- Args: default monitor arguments (see below) - Variables that can be used with the `-t`/`--template` argument: `dev`, `rx`, `tx`, `rxbar`, `txbar` - Default template: `<dev>: <rx>|<tx>` @@ -331,7 +332,7 @@ Monitors have default aliases. - aliases to the interface name with the suffix "wi": thus, `Wirelss "wlan0" []` can be used as `%wlan0wi%` -- Args: the argument list (see below) +- Args: default monitor arguments (see below) - Variables that can be used with the `-t`/`--template` argument: `essid`, `quality`, `qualitybar` - Default template: `<essid> <quality>` @@ -342,7 +343,7 @@ Monitors have default aliases. `Memory Args RefreshRate` - aliases to `memory` -- Args: the argument list (see below) +- Args: default monitor arguments (see below) - Variables that can be used with the `-t`/`--template` argument: `total`, `free`, `buffer`, `cache`, `rest`, `used`, `usedratio`, `usedbar`, `freebar` @@ -351,7 +352,7 @@ Monitors have default aliases. `Swap Args RefreshRate` - aliases to `swap` -- Args: the argument list (see below) +- Args: default monitor arguments (see below) - Variables that can be used with the `-t`/`--template` argument: `total`, `used`, `free`, `usedratio` - Default template: `Swap: <usedratio>%` @@ -359,7 +360,7 @@ Monitors have default aliases. `Cpu Args RefreshRate` - aliases to `cpu` -- Args: the argument list (see below) +- Args: default monitor arguments (see below) - Variables that can be used with the `-t`/`--template` argument: `total`, `bar`, `user`, `nice`, `system`, `idle` - Default template: `Cpu: <total>%` @@ -367,7 +368,7 @@ Monitors have default aliases. `MultiCpu Args RefreshRate` - aliases to `multicpu` -- Args: the argument list (see below) +- Args: default monitor arguments (see below) - Variables that can be used with the `-t`/`--template` argument: `total`, `bar`, `user`, `nice`, `system`, `idle`, `total0`, `bar0`, `user0`, `nice0`, `system0`, `idle0`, ... @@ -375,11 +376,7 @@ Monitors have default aliases. `Battery Args RefreshRate` -- aliases to `battery` -- Args: the argument list (see below) -- Variables that can be used with the `-t`/`--template` argument: - `left`, `leftbar`, `status` -- Default template: `Batt: <left>` +- Same as `BatteryP ["BAT0", "BAT1", "BAT2"] Args RefreshRate`. `BatteryP Dirs Args RefreshRate` @@ -388,15 +385,36 @@ Monitors have default aliases. look for the `state` and `info` files. Example: `["BAT0","BAT1","BAT2"]`. Only the first 3 directories will be searched. -- Args: the argument list (see below) +- Args: default monitor arguments (see below), plus the following specif ones: + - `-O`: string for AC "on" status (default: "On") + - `-o`: string for AC "off" status (default: "Off") + - `-L`: low power (`watts`) threshold (default: -12) + - `-H`: high power threshold (defualt: -10) + - `-l`: color to display power lower than the `-L` threshold + - `-m`: color to display power lower than the `-H` threshold + - `-h`: color to display power highter than the `-H` threshold + - `-p`: color to display positive power (battery charging) - Variables that can be used with the `-t`/`--template` argument: - `left`, `leftbar`, `status` -- Default template: `Batt: <left>%` + `left`, `leftbar`, `timeleft`, `watts`, `acstatus` +- Default template: `Batt: <watts>, <left>% / <timeleft>` +- Example (note that you need "--" to separate regular monitor options from + Battery's specific ones): + + Run BatteryP ["BAT0"] + ["-t", "<acstatus><watts> (<left>%)", + "-L", "10", "-H", "80", "-p", "3", + "--", "-O", "<fc=green>On</fc> - ", "-o", "", + "-L", "-15", "-H", "-5", + "-l", "red", "-m", "blue", "-h", "green"] + 600 + In the above example, the thresholds before the "--" separator + refer to the `<left>` field, while those after the separator affect + how `<watts>` is displayed. `TopProc Args RefreshRate` - aliases to `top` -- Args: the argument list (see below) +- Args: default monitor arguments (see below) - Variables that can be used with the `-t`/`--template` argument: `no`, `name1`, `cpu1`, `both1`, `mname1`, `mem1`, `mboth1`, `name2`, `cpu2`, `both2`, `mname2`, `mem2`, `mboth2`, ... @@ -409,7 +427,7 @@ Monitors have default aliases. `TopMem Args RefreshRate` - aliases to `topmem` -- Args: the argument list (see below) +- Args: default monitor arguments (see below) - Variables that can be used with the `-t`/`--template` argument: `name1`, `mem1`, `both1`, `name2`, `mem2`, `both2`, ... - Default template: `<both1>` @@ -424,7 +442,7 @@ Monitors have default aliases. where the template can contain <size>, <free>, <used>, <freep> or <usedp>, <freebar> or <usedbar> for total, free, used, free percentage and used percentage of the given file system capacity. -- Args: the argument list (see above). `-t`/`--template` is ignored. +- Args: default monitor arguments (see below). `-t`/`--template` is ignored. - Default template: none (you must specify a template for each file system). - Example: @@ -438,7 +456,7 @@ Monitors have default aliases. - Disks: list of pairs of the form (device or mount point, template), where the template can contain <total>, <read>, <write> for total, read and write speed, respectively. -- Args: the argument list (see above). `-t`/`--template` is ignored. +- Args: default monitor arguments (see below). `-t`/`--template` is ignored. - Default template: none (you must specify a template for each file system). - Example: @@ -447,7 +465,7 @@ Monitors have default aliases. `Thermal Zone Args RefreshRate` - aliases to the Zone: so `Zone "THRM" []` can be used in template as `%THRM%` -- Args: the argument list (see below) +- Args: default monitor arguments (see below) - Variables that can be used with the `-t`/`--template` argument: `temp` - Default template: `Thm: <temp>C` @@ -460,7 +478,7 @@ Monitors have default aliases. `CpuFreq Args RefreshRate` - aliases to `cpufreq` -- Args: the argument list (see below) +- Args: default monitor arguments (see below) - Variables that can be used with the `-t`/`--template` argument: `cpu0`, `cpu1`, .., `cpuN` - Default template: `Freq: <cpu0>GHz` @@ -473,7 +491,7 @@ Monitors have default aliases. `CoreTemp Args RefreshRate` - aliases to `coretemp` -- Args: the argument list (see below) +- Args: default monitor arguments (see below) - Variables that can be used with the `-t`/`--template` argument: `core0`, `core1`, .., `coreN` - Default template: `Temp: <core0>C` @@ -489,7 +507,7 @@ Monitors have default aliases. - This monitor will only be compiled if you ask for it using the `with_mpd` flag. It needs [libmpd] 5.0 or later (available on Hackage). - aliases to `mpd` -- Args: the argument list (see below). In addition you can provide +- Args: default monitor arguments (see below). In addition you can provide `-P`, `-S` and `-Z`, with an string argument, to represent the playing, stopped and paused states in the `statei` template field, and `-h`, `-p` and `-x` for the host, port and password (default @@ -739,11 +757,11 @@ code] or send mail to our [Mailing list]. Credits ======= -xmobar [incorporates patches] from: Roman Cheplyaka, John Goerzen, Juraj -Hercek, Tomas Janousek, Spencer Janssen, Krzysztof Kosciuszkiewicz, -Lennart Kolmodin, Dmitry Kurochkin, Svein Ove, Jens Petersen, Andrew -Sackville-West, Alexander Solovyov, Sergei Trofimovich, Jan -Vornberger, Daniel Wagner and Norbert Zeh. +xmobar [incorporates patches] from Roman Cheplyaka, John Goerzen, +Juraj Hercek, Tomas Janousek, Spencer Janssen, Krzysztof +Kosciuszkiewicz, Lennart Kolmodin, Dmitry Kurochkin, Svein Ove, Jens +Petersen, Petr Rockai, Andrew Sackville-West, Alexander Solovyov, +Sergei Trofimovich, Jan Vornberger, Daniel Wagner and Norbert Zeh. [incorporates patches]: http://www.ohloh.net/p/xmobar/contributors |