diff options
Diffstat (limited to 'doc/plugins.org')
| -rw-r--r-- | doc/plugins.org | 301 |
1 files changed, 152 insertions, 149 deletions
diff --git a/doc/plugins.org b/doc/plugins.org index a1fa4df..907d59f 100644 --- a/doc/plugins.org +++ b/doc/plugins.org @@ -1,35 +1,37 @@ * System Monitor Plugins -This is the description of the system monitor plugins available in -xmobar. Some of them are only installed when an optional build option is -set: we mention that fact, when needed, in their description. - -Each monitor has an =alias= to be used in the output template. Monitors -may have default aliases, see the documentation of the monitor in -question. - -There are two types of arguments: ones that all monitors share (the so -called /default monitor arguments/) and arguments that are specific to a -certain monitor. - -All Monitors accept a common set of arguments, described below in -[[Default Monitor Arguments]]. Some monitors also accept additional options -that are specific to them. When specifying the list of arguments in your -configuration, the common options come first, followed by =--=, followed -by any monitor-specific options. For example, the following [[=Battery Args RefreshRate=][Battery]] -configuration first sets the global =template= and =Low= arguments and -then specifies the battery-specific =off= option. - -#+begin_src haskell - Run Battery - [ "--template", "<acstatus>" - , "--Low" , "15" - -- battery specific options start here. - , "--" - , "--off" , "<left> (<timeleft>)" - ] - 100 -#+end_src + This is the description of the system monitor plugins available in + xmobar. Some of them are only installed when an optional build + option is set: we mention that fact, when needed, in their + description. + + Each monitor has an =alias= to be used in the output + template. Monitors may have default aliases, see the documentation + of the monitor in question. + + There are two types of arguments: ones that all monitors share (the + so called /default monitor arguments/) and arguments that are specific + to a certain monitor. + + All Monitors accept a common set of arguments, described below in + [[Default Monitor Arguments]]. Some monitors also accept additional + options that are specific to them. When specifying the list of + arguments in your configuration, the common options come first, + followed by =--=, followed by any monitor-specific options. For + example, the following [[=Battery Args RefreshRate=][Battery]] configuration first sets the global + =template= and =Low= arguments and then specifies the battery-specific + =off= option. + + #+begin_src haskell + Run Battery + [ "--template", "<acstatus>" + , "--Low" , "15" + -- battery specific options start here. + , "--" + , "--off" , "<left> (<timeleft>)" + ] + 100 + #+end_src ** Icon Patterns @@ -1260,8 +1262,8 @@ something like: * Interfacing with Window Managers -Listed below are ways to interface xmobar with your window manager of -choice. + Listed below are ways to interface xmobar with your window manager + of choice. ** Property-based Logging *** =XMonadLog= @@ -1438,9 +1440,9 @@ choice. ** Software Transactional Memory -When invoking xmobar from other Haskell code it can be easier and -more performant to use shared memory. The following plugins leverage -=Control.Concurrent.STM= to realize these gains for xmobar. + When invoking xmobar from other Haskell code it can be easier and + more performant to use shared memory. The following plugins + leverage =Control.Concurrent.STM= to realize these gains for xmobar. *** =QueueReader (TQueue a) (a -> String) String= @@ -1482,69 +1484,70 @@ more performant to use shared memory. The following plugins leverage * Executing External Commands -In order to execute an external command you can either write the command -name in the template, in this case it will be executed without -arguments, or you can configure it in the "commands" configuration -option list with the Com template command: + In order to execute an external command you can either write the + command name in the template, in this case it will be executed + without arguments, or you can configure it in the "commands" + configuration option list with the Com template command: -=Com ProgramName Args Alias RefreshRate= + =Com ProgramName Args Alias RefreshRate= -- ProgramName: the name of the program -- Args: the arguments to be passed to the program at execution time -- RefreshRate: number of tenths of second between re-runs of the - command. A zero or negative rate means that the command will be - executed only once. -- Alias: a name to be used in the template. If the alias is en empty - string the program name can be used in the template. + - ProgramName: the name of the program + - Args: the arguments to be passed to the program at execution time + - RefreshRate: number of tenths of second between re-runs of the + command. A zero or negative rate means that the command will be + executed only once. + - Alias: a name to be used in the template. If the alias is en empty + string the program name can be used in the template. -E.g.: + E.g.: -#+begin_src haskell - Run Com "uname" ["-s","-r"] "" 0 -#+end_src + #+begin_src haskell + Run Com "uname" ["-s","-r"] "" 0 + #+end_src -can be used in the output template as =%uname%= (and xmobar will call -/uname/ only once), while + can be used in the output template as =%uname%= (and xmobar will call + /uname/ only once), while -#+begin_src haskell - Run Com "date" ["+\"%a %b %_d %H:%M\""] "mydate" 600 -#+end_src + #+begin_src haskell + Run Com "date" ["+\"%a %b %_d %H:%M\""] "mydate" 600 + #+end_src -can be used in the output template as =%mydate%=. + can be used in the output template as =%mydate%=. -Sometimes, you don't mind if the command executed exits with an error, -or you might want to display a custom message in that case. To that end, -you can use the =ComX= variant: + Sometimes, you don't mind if the command executed exits with an + error, or you might want to display a custom message in that + case. To that end, you can use the =ComX= variant: -=ComX ProgramName Args ExitMessage Alias RefreshRate= + =ComX ProgramName Args ExitMessage Alias RefreshRate= -Works like =Com=, but displaying =ExitMessage= (a string) if the -execution fails. For instance: + Works like =Com=, but displaying =ExitMessage= (a string) if the + execution fails. For instance: -#+begin_src haskell - Run ComX "date" ["+\"%a %b %_d %H:%M\""] "N/A" "mydate" 600 -#+end_src + #+begin_src haskell + Run ComX "date" ["+\"%a %b %_d %H:%M\""] "N/A" "mydate" 600 + #+end_src -will display "N/A" if for some reason the =date= invocation fails. + will display "N/A" if for some reason the =date= invocation fails. * The DBus Interface -When compiled with the optional =with_dbus= flag, xmobar can be -controlled over dbus. All signals defined in [[https://github.com/jaor/xmobar/blob/master/src/Xmobar/System/Signal.hs][src/Signal.hs]] as =data -SignalType= can now be sent over dbus to xmobar. Due to current -limitations of the implementation only one process of xmobar can acquire -the dbus. This is handled on a first-come-first-served basis, meaning -that the first process will get the dbus interface. Other processes will -run without further problems, yet have no dbus interface. + When compiled with the optional =with_dbus= flag, xmobar can be + controlled over dbus. All signals defined in [[https://github.com/jaor/xmobar/blob/master/src/Xmobar/System/Signal.hs][src/Signal.hs]] as =data + SignalType= can now be sent over dbus to xmobar. Due to current + limitations of the implementation only one process of xmobar can + acquire the dbus. This is handled on a first-come-first-served + basis, meaning that the first process will get the dbus + interface. Other processes will run without further problems, yet + have no dbus interface. -- Bus Name: =org.Xmobar.Control= -- Object Path: =/org/Xmobar/Control= -- Member Name: Any of SignalType, e.g. =string:Reveal= -- Interface Name: =org.Xmobar.Control= + - Bus Name: =org.Xmobar.Control= + - Object Path: =/org/Xmobar/Control= + - Member Name: Any of SignalType, e.g. =string:Reveal= + - Interface Name: =org.Xmobar.Control= -An example using the =dbus-send= command line utility: + An example using the =dbus-send= command line utility: -#+begin_src shell + #+begin_src shell dbus-send \ --session \ --dest=org.Xmobar.Control \ @@ -1553,82 +1556,82 @@ An example using the =dbus-send= command line utility: '/org/Xmobar/Control' \ org.Xmobar.Control.SendSignal \ "string:Toggle 0" -#+end_src + #+end_src -It is also possible to send multiple signals at once: + It is also possible to send multiple signals at once: -#+begin_src shell - # send to another screen, reveal and toggle the persistent flag - dbus-send [..] \ - "string:ChangeScreen 0" "string:Reveal 0" "string:TogglePersistent" -#+end_src + #+begin_src shell + # send to another screen, reveal and toggle the persistent flag + dbus-send [..] \ + "string:ChangeScreen 0" "string:Reveal 0" "string:TogglePersistent" + #+end_src -The =Toggle=, =Reveal=, and =Hide= signals take an additional integer -argument that denotes an initial delay, in tenths of a second, before -the command takes effect. + The =Toggle=, =Reveal=, and =Hide= signals take an additional integer + argument that denotes an initial delay, in tenths of a second, + before the command takes effect. ** Example for using the DBus IPC interface with XMonad -Bind the key which should {,un}map xmobar to a dummy value. This is -necessary for {,un}grabKey in xmonad. + Bind the key which should {,un}map xmobar to a dummy value. This is + necessary for {,un}grabKey in xmonad. -#+begin_src haskell - ((0, xK_Alt_L), pure ()) -#+end_src + #+begin_src haskell + ((0, xK_Alt_L), pure ()) + #+end_src -Also, install =avoidStruts= layout modifier from -=XMonad.Hooks.ManageDocks= + Also, install =avoidStruts= layout modifier from + =XMonad.Hooks.ManageDocks= -Finally, install these two event hooks (=handleEventHook= in =XConfig=) -=myDocksEventHook= is a replacement for =docksEventHook= which reacts on -unmap events as well (which =docksEventHook= doesn't). + Finally, install these two event hooks (=handleEventHook= in =XConfig=) + =myDocksEventHook= is a replacement for =docksEventHook= which reacts + on unmap events as well (which =docksEventHook= doesn't). -#+begin_src haskell - import qualified XMonad.Util.ExtensibleState as XS - - data DockToggleTime = DTT { lastTime :: Time } deriving (Eq, Show, Typeable) - - instance ExtensionClass DockToggleTime where - initialValue = DTT 0 - - toggleDocksHook :: Int -> KeySym -> Event -> X All - toggleDocksHook to ks ( KeyEvent { ev_event_display = d - , ev_event_type = et - , ev_keycode = ekc - , ev_time = etime - } ) = - io (keysymToKeycode d ks) >>= toggleDocks >> return (All True) - where - toggleDocks kc - | ekc == kc && et == keyPress = do - safeSendSignal ["Reveal 0", "TogglePersistent"] - XS.put ( DTT etime ) - | ekc == kc && et == keyRelease = do - gap <- XS.gets ( (-) etime . lastTime ) - safeSendSignal [ "TogglePersistent" - , "Hide " ++ show (if gap < 400 then to else 0) - ] - | otherwise = return () - - safeSendSignal s = catchX (io $ sendSignal s) (return ()) - sendSignal = withSession . callSignal - withSession mc = connectSession >>= \c -> callNoReply c mc >> disconnect c - callSignal :: [String] -> MethodCall - callSignal s = ( methodCall - ( objectPath_ "/org/Xmobar/Control" ) - ( interfaceName_ "org.Xmobar.Control" ) - ( memberName_ "SendSignal" ) - ) { methodCallDestination = Just $ busName_ "org.Xmobar.Control" - , methodCallBody = map toVariant s - } - - toggleDocksHook _ _ _ = return (All True) - - myDocksEventHook :: Event -> X All - myDocksEventHook e = do - when (et == mapNotify || et == unmapNotify) $ - whenX ((not `fmap` (isClient w)) <&&> runQuery checkDock w) refresh - return (All True) - where w = ev_window e - et = ev_event_type e -#+end_src + #+begin_src haskell + import qualified XMonad.Util.ExtensibleState as XS + + data DockToggleTime = DTT { lastTime :: Time } deriving (Eq, Show, Typeable) + + instance ExtensionClass DockToggleTime where + initialValue = DTT 0 + + toggleDocksHook :: Int -> KeySym -> Event -> X All + toggleDocksHook to ks ( KeyEvent { ev_event_display = d + , ev_event_type = et + , ev_keycode = ekc + , ev_time = etime + } ) = + io (keysymToKeycode d ks) >>= toggleDocks >> return (All True) + where + toggleDocks kc + | ekc == kc && et == keyPress = do + safeSendSignal ["Reveal 0", "TogglePersistent"] + XS.put ( DTT etime ) + | ekc == kc && et == keyRelease = do + gap <- XS.gets ( (-) etime . lastTime ) + safeSendSignal [ "TogglePersistent" + , "Hide " ++ show (if gap < 400 then to else 0) + ] + | otherwise = return () + + safeSendSignal s = catchX (io $ sendSignal s) (return ()) + sendSignal = withSession . callSignal + withSession mc = connectSession >>= \c -> callNoReply c mc >> disconnect c + callSignal :: [String] -> MethodCall + callSignal s = ( methodCall + ( objectPath_ "/org/Xmobar/Control" ) + ( interfaceName_ "org.Xmobar.Control" ) + ( memberName_ "SendSignal" ) + ) { methodCallDestination = Just $ busName_ "org.Xmobar.Control" + , methodCallBody = map toVariant s + } + + toggleDocksHook _ _ _ = return (All True) + + myDocksEventHook :: Event -> X All + myDocksEventHook e = do + when (et == mapNotify || et == unmapNotify) $ + whenX ((not `fmap` (isClient w)) <&&> runQuery checkDock w) refresh + return (All True) + where w = ev_window e + et = ev_event_type e + #+end_src |