diff options
Diffstat (limited to 'doc/plugins.org')
| -rw-r--r-- | doc/plugins.org | 1648 |
1 files changed, 813 insertions, 835 deletions
diff --git a/doc/plugins.org b/doc/plugins.org index 0516b67..4c6b2aa 100644 --- a/doc/plugins.org +++ b/doc/plugins.org @@ -1,5 +1,3 @@ -#+OPTIONS: toc:t - * System Monitor Plugins This is the description of the system monitor plugins available in @@ -33,7 +31,7 @@ then specifies the battery-specific =off= option. 100 #+end_src -** Icon patterns +** Icon Patterns Some monitors allow usage of strings that depend on some integer value from 0 to 8 by replacing all occurrences of =%%= with it @@ -228,1036 +226,1016 @@ something like: Glasgow Airport: 16.0C #+end_src -** =Uptime Args RefreshRate= - -- Aliases to =uptime= -- Args: default monitor arguments. The low and high thresholds refer to - the number of days. -- Variables that can be used with the =-t/--template= argument: =days=, - =hours=, =minutes=, =seconds=. The total uptime is the sum of all - those fields. You can set the =-S= argument to =True= to add units to - the display of those numeric fields. -- Default template: =Up: <days>d <hours>h <minutes>m= - -** =Weather StationID Args RefreshRate= - -- Aliases to the Station ID: so =Weather "LIPB" []= can be used in - template as =%LIPB%= -- Thresholds refer to temperature in the selected units -- Args: default monitor arguments, plus: - - - =--weathers= /string/ : display a default string when the =weather= - variable is not reported. - - - short option: =-w= - - Default: "" - - - =--useManager= /bool/ : Whether to use one single manager per - monitor for managing network connections or create a new one every - time a connection is made. - - - Short option: =-m= - - Default: True - -- Variables that can be used with the =-t/--template= argument: - =station=, =stationState=, =year=, =month=, =day=, =hour=, - =windCardinal=, =windAzimuth=, =windMph=, =windKnots=, =windMs=, - =windKmh= =visibility=, =skyCondition=, =weather=, =tempC=, =tempF=, - =dewPointC=, =dewPointF=, =rh=, =pressure= -- Default template: =<station>: <tempC>C, rh <rh>% (<hour>)= -- Retrieves weather information from http://tgftp.nws.noaa.gov. Here is - an [[https://tgftp.nws.noaa.gov/data/observations/metar/decoded/CYLD.TXT][example]], also showcasing the kind of information that may be - extracted. - -** =WeatherX StationID SkyConditions Args RefreshRate= - -- Works in the same way as =Weather=, but takes an additional argument, - a list of pairs from sky conditions to their replacement (typically a - unicode string or an icon specification). -- Use the variable =skyConditionS= to display the replacement of the - corresponding sky condition. All other =Weather= template variables - are available as well. - -For example: - -#+begin_src haskell - WeatherX "LEBL" - [ ("clear", "🌣") - , ("sunny", "🌣") - , ("mostly clear", "🌤") - , ("mostly sunny", "🌤") - , ("partly sunny", "⛅") - , ("fair", "🌑") - , ("cloudy","☁") - , ("overcast","☁") - , ("partly cloudy", "⛅") - , ("mostly cloudy", "🌧") - , ("considerable cloudiness", "⛈")] - ["-t", "<fn=2><skyConditionS></fn> <tempC>° <rh>% <windKmh> (<hour>)" - , "-L","10", "-H", "25", "--normal", "black" - , "--high", "lightgoldenrod4", "--low", "darkseagreen4"] - 18000 -#+end_src - -As mentioned, the replacement string can also be an icon specification, -such as =("clear", "<icon=weather-clear.xbm/>")=. - -** =Network Interface Args RefreshRate= - -- Aliases to the interface name: so =Network "eth0" []= can be used as - =%eth0%= -- Thresholds refer to velocities expressed in Kb/s -- Args: default monitor arguments, plus: - - - =--rx-icon-pattern=: dynamic string for reception rate in =rxipat=. - - =--tx-icon-pattern=: dynamic string for transmission rate in - =txipat=. - - =--up=: string used for the =up= variable value when the interface - is up. - -- Variables that can be used with the =-t=/=--template= argument: =dev=, - =rx=, =tx=, =rxbar=, =rxvbar=, =rxipat=, =txbar=, =txvbar=, =txipat=, - =up=. Reception and transmission rates (=rx= and =tx=) are displayed - by default as Kb/s, without any suffixes, but you can set the =-S= to - "True" to make them displayed with adaptive units (Kb/s, Mb/s, etc.). -- Default template: =<dev>: <rx>KB|<tx>KB= - -** =DynNetwork Args RefreshRate= - -- Active interface is detected automatically -- Aliases to "dynnetwork" -- Thresholds are expressed in Kb/s -- Args: default monitor arguments, plus: - -- =--rx-icon-pattern=: dynamic string for reception rate in =rxipat=. -- =--tx-icon-pattern=: dynamic string for transmission rate in =txipat= -- =--devices=: comma-separated list of devices to show. - -- Variables that can be used with the =-t=/=--template= argument: - =dev=, =rx=, =tx=, =rxbar=, =rxvbar=, =rxipat=, =txbar=, =txvbar=, - =txipat=. - -Reception and transmission rates (=rx= and =tx=) are displayed in Kbytes -per second, and you can set the =-S= to "True" to make them displayed -with units (the string "Kb/s"). -- Default template: =<dev>: <rx>KB|<tx>KB= -- Example of usage of =--devices= option: - - =["--", "--devices", "wlp2s0,enp0s20f41"]= - -** =Wireless Interface Args RefreshRate= - -- If set to "", first suitable wireless interface is used. -- Aliases to the interface name with the suffix "wi": thus, - =Wireless "wlan0" []= can be used as =%wlan0wi%=, and - =Wireless "" []= as =%wi%=. -- Args: default monitor arguments, plus: - - - =--quality-icon-pattern=: dynamic string for connection quality in - =qualityipat=. - -- Variables that can be used with the =-t=/=--template= argument: - =ssid=, =signal=, =quality=, =qualitybar=, =qualityvbar=, - =qualityipat= -- Thresholds refer to link quality on a =[0, 100]= scale. Note that - =quality= is calculated from =signal= (in dBm) by a possibly lossy - conversion. It is also not taking into account many factors such as - noise level, air busy time, transcievers' capabilities and the others - which can have drastic impact on the link performance. -- Default template: =<ssid> <quality>= -- To activate this plugin you must pass the =with_nl80211= or the - =with_iwlib= flag during compilation. - -** =Memory Args RefreshRate= - -- Aliases to =memory= -- Args: default monitor arguments, plus: - - - =--used-icon-pattern=: dynamic string for used memory ratio in - =usedipat=. - - =--free-icon-pattern=: dynamic string for free memory ratio in - =freeipat=. - - =--available-icon-pattern=: dynamic string for available memory - ratio in =availableipat=. - -- Thresholds refer to percentage of used memory -- Variables that can be used with the =-t/--template= argument: - =total=, =free=, =buffer=, =cache=, =available=, =used=, =usedratio=, - =usedbar=, =usedvbar=, =usedipat=, =freeratio=, =freebar=, =freevbar=, - =freeipat=, =availableratio=, =availablebar=, =availablevbar=, - =availableipat= -- Default template: =Mem: <usedratio>% (<cache>M)= - -** =Swap Args RefreshRate= - -- Aliases to =swap= -- Args: default monitor arguments -- Thresholds refer to percentage of used swap -- Variables that can be used with the =-t/--template= argument: - =total=, =used=, =free=, =usedratio= -- Default template: =Swap: <usedratio>%= - -** =Cpu Args RefreshRate= - -- Aliases to =cpu= -- Args: default monitor arguments, plus: - - - =--load-icon-pattern=: dynamic string for cpu load in =ipat= - -- Thresholds refer to percentage of CPU load -- Variables that can be used with the =-t/--template= argument: - =total=, =bar=, =vbar=, =ipat=, =user=, =nice=, =system=, =idle=, - =iowait= -- Default template: =Cpu: <total>%= - -** =MultiCpu Args RefreshRate= - -- Aliases to =multicpu= -- Args: default monitor arguments, plus: - - - =--load-icon-pattern=: dynamic string for overall cpu load in - =ipat=. - - =--load-icon-patterns=: dynamic string for each cpu load in - =autoipat=, =ipat{i}=. This option can be specified several times. - nth option corresponds to nth cpu. - - =--fallback-icon-pattern=: dynamic string used by =autoipat= and - =ipat{i}= when no =--load-icon-patterns= has been provided for - =cpu{i}= - - =--contiguous-icons=: flag (no value needs to be provided) that - causes the load icons to be drawn without padding. - -- Thresholds refer to percentage of CPU load -- Variables that can be used with the =-t/--template= argument: - =autototal=, =autobar=, =autovbar=, =autoipat=, =autouser=, - =autonice=, =autosystem=, =autoidle=, =total=, =bar=, =vbar=, =ipat=, - =user=, =nice=, =system=, =idle=, =total0=, =bar0=, =vbar0=, =ipat0=, - =user0=, =nice0=, =system0=, =idle0=, ... The auto* variables - automatically detect the number of CPUs on the system and display one - entry for each. -- Default template: =Cpu: <total>%= - -** =Battery Args RefreshRate= - -- Same as - - #+begin_src haskell - BatteryP ["BAT", "BAT0", "BAT1", "BAT2"] Args RefreshRate - #+end_src - -** =BatteryP Dirs Args RefreshRate= - -- Aliases to =battery= - -- Dirs: list of directories in =/sys/class/power_supply/= where to look - for the ACPI files of each battery. Example: =["BAT0","BAT1","BAT2"]=. - Only up to 3 existing directories will be searched. - -- Args: default monitor arguments, plus the following specific ones - (these options, being specific to the monitor, are to be specified - after a =--= in the argument list): - - - =-O=: string for AC "on" status (default: "On") - - =-i=: string for AC "idle" status (default: "On") - - =-o=: string for AC "off" status (default: "Off") - - =-L=: low power (=watts=) threshold (default: 10) - - =-H=: high power threshold (default: 12) - - =-l=: color to display power lower than the =-L= threshold - - =-m=: color to display power lower than the =-H= threshold - - =-h=: color to display power higher than the =-H= threshold - - =-p=: color to display positive power (battery charging) - - =-f=: file in =/sys/class/power_supply= with AC info (default: - "AC/online") - - =-A=: a number between 0 and 100, threshold below which the action - given by =-a=, if any, is performed (default: 5) - - =-a=: a string with a system command that is run when the percentage - left in the battery is less or equal than the threshold given by the - =-A= option. If not present, no action is undertaken. - - =-P=: to include a percentage symbol in =left=. - - =--on-icon-pattern=: dynamic string for current battery charge when - AC is "on" in =leftipat=. - - =--off-icon-pattern=: dynamic string for current battery charge when - AC is "off" in =leftipat=. - - =--idle-icon-pattern=: dynamic string for current battery charge - when AC is "idle" in =leftipat=. - - =--lows=: string for AC "off" status and power lower than the =-L= - threshold (default: "") - - =--mediums=: string for AC "off" status and power lower than the - =-H= threshold (default: "") - - =--highs=: string for AC "off" status and power higher than the =-H= - threshold (default: "") - -- Variables that can be used with the =-t/--template= argument: - =left=, =leftbar=, =leftvbar=, =leftipat=, =timeleft=, =watts=, - =acstatus= - -- Default template: =Batt: <watts>, <left>% / <timeleft>= - -- Example (note that you need "--" to separate regular monitor options - from Battery's specific ones): - - #+begin_src haskell - Run BatteryP ["BAT0"] - ["-t", "<acstatus><watts> (<left>%)", - "-L", "10", "-H", "80", "-p", "3", - "--", "-O", "<fc=green>On</fc> - ", "-i", "", - "-L", "-15", "-H", "-5", - "-l", "red", "-m", "blue", "-h", "green" - "-a", "notify-send -u critical 'Battery running out!!'", - "-A", "3"] - 600 - #+end_src - - In the above example, the thresholds before the =--= separator affect - only the =<left>= and =<leftbar>= fields, while those after the - separator affect how =<watts>= is displayed. For this monitor, neither - the generic nor the specific options have any effect on =<timeleft>=. - We are also telling the monitor to execute the unix command - =notify-send= when the percentage left in the battery reaches 6%. - - It is also possible to specify template variables in the =-O= and =-o= - switches, as in the following example: - - #+begin_src haskell - Run BatteryP ["BAT0"] - ["-t", "<acstatus>" - , "-L", "10", "-H", "80" - , "-l", "red", "-h", "green" - , "--", "-O", "Charging", "-o", "Battery: <left>%" - ] 10 - #+end_src - -- The "idle" AC state is selected whenever the AC power entering the - battery is zero. - -** =BatteryN Dirs Args RefreshRate Alias= - -Works like =BatteryP=, but lets you specify an alias for the monitor -other than "battery". Useful in case you one separate monitors for more -than one battery. - -** =TopProc Args RefreshRate= - -- Aliases to =top= -- Args: default monitor arguments. The low and high thresholds (=-L= and - =-H=) denote, for memory entries, the percent of the process memory - over the total amount of memory currently in use and, for cpu entries, - the activity percentage (i.e., the value of =cpuN=, which takes values - between 0 and 100). -- Variables that can be used with the =-t/--template= argument: =no=, - =name1=, =cpu1=, =both1=, =mname1=, =mem1=, =mboth1=, =name2=, =cpu2=, - =both2=, =mname2=, =mem2=, =mboth2=, ... -- Default template: =<both1>= -- Displays the name and cpu/mem usage of running processes (=bothn= and - =mboth= display both, and is useful to specify an overall maximum - and/or minimum width, using the =-m/-M= arguments. =no= gives the - total number of processes. - -** =TopMem Args RefreshRate= - -- Aliases to =topmem= -- Args: default monitor arguments. The low and high thresholds (=-L= and - =-H=) denote the percent of the process memory over the total amount - of memory currently in use. -- Variables that can be used with the =-t/--template= argument: - =name1=, =mem1=, =both1=, =name2=, =mem2=, =both2=, ... -- Default template: =<both1>= -- Displays the name and RSS (resident memory size) of running processes - (=bothn= displays both, and is useful to specify an overall maximum - and/or minimum width, using the =-m/-M= arguments. - -** =Date Format Alias RefreshRate= - -- Format is a time format string, as accepted by the standard ISO C - =strftime= function (or Haskell's =formatCalendarTime=). Basically, - if =date +"my-string"= works with your command then =Date= will handle - it correctly. - -- Timezone changes are picked up automatically every minute. - -- Sample usage: - - #+begin_src haskell - Run Date "%a %b %_d %Y <fc=#ee9a00>%H:%M:%S</fc>" "date" 10 - #+end_src - -** =DateZone Format Locale Zone Alias RefreshRate= - -A variant of the =Date= monitor where one is able to explicitly set the -time-zone, as well as the locale. - -- The format of =DateZone= is exactly the same as =Date=. - -- If =Locale= is =""= (the empty string) the default locale of the - system is used, otherwise use the given locale. If there are more - instances of =DateZone=, using the empty string as input for =Locale= - is not recommended. +** Battery Monitors +*** =Battery Args RefreshRate= + + Same as + + #+begin_src haskell + BatteryP ["BAT", "BAT0", "BAT1", "BAT2"] Args RefreshRate + #+end_src + +*** =BatteryP Dirs Args RefreshRate= + + - Aliases to =battery= + + - Dirs: list of directories in =/sys/class/power_supply/= where to look + for the ACPI files of each battery. Example: =["BAT0","BAT1","BAT2"]=. + Only up to 3 existing directories will be searched. + + - Args: default monitor arguments, plus the following specific ones + (these options, being specific to the monitor, are to be specified + after a =--= in the argument list): + + - =-O=: string for AC "on" status (default: "On") + - =-i=: string for AC "idle" status (default: "On") + - =-o=: string for AC "off" status (default: "Off") + - =-L=: low power (=watts=) threshold (default: 10) + - =-H=: high power threshold (default: 12) + - =-l=: color to display power lower than the =-L= threshold + - =-m=: color to display power lower than the =-H= threshold + - =-h=: color to display power higher than the =-H= threshold + - =-p=: color to display positive power (battery charging) + - =-f=: file in =/sys/class/power_supply= with AC info (default: + "AC/online") + - =-A=: a number between 0 and 100, threshold below which the action + given by =-a=, if any, is performed (default: 5) + - =-a=: a string with a system command that is run when the percentage + left in the battery is less or equal than the threshold given by the + =-A= option. If not present, no action is undertaken. + - =-P=: to include a percentage symbol in =left=. + - =--on-icon-pattern=: dynamic string for current battery charge when + AC is "on" in =leftipat=. + - =--off-icon-pattern=: dynamic string for current battery charge when + AC is "off" in =leftipat=. + - =--idle-icon-pattern=: dynamic string for current battery charge + when AC is "idle" in =leftipat=. + - =--lows=: string for AC "off" status and power lower than the =-L= + threshold (default: "") + - =--mediums=: string for AC "off" status and power lower than the + =-H= threshold (default: "") + - =--highs=: string for AC "off" status and power higher than the =-H= + threshold (default: "") + + - Variables that can be used with the =-t/--template= argument: + =left=, =leftbar=, =leftvbar=, =leftipat=, =timeleft=, =watts=, + =acstatus= + + - Default template: =Batt: <watts>, <left>% / <timeleft>= + + - Example (note that you need "--" to separate regular monitor options + from Battery's specific ones): -- =Zone= is the name of the =TimeZone=. It is assumed that the time-zone - database is stored in =/usr/share/zoneinfo/=. If the empty string is - given as =Zone=, the default system time is used. - -- Sample usage: - - #+begin_src haskell - Run DateZone "%a %H:%M:%S" "de_DE.UTF-8" "Europe/Vienna" "viennaTime" 10 - #+end_src - -** =DiskU Disks Args RefreshRate= + #+begin_src haskell + Run BatteryP ["BAT0"] + ["-t", "<acstatus><watts> (<left>%)", + "-L", "10", "-H", "80", "-p", "3", + "--", "-O", "<fc=green>On</fc> - ", "-i", "", + "-L", "-15", "-H", "-5", + "-l", "red", "-m", "blue", "-h", "green" + "-a", "notify-send -u critical 'Battery running out!!'", + "-A", "3"] + 600 + #+end_src -- Aliases to =disku= + In the above example, the thresholds before the =--= separator affect + only the =<left>= and =<leftbar>= fields, while those after the + separator affect how =<watts>= is displayed. For this monitor, neither + the generic nor the specific options have any effect on =<timeleft>=. + We are also telling the monitor to execute the unix command + =notify-send= when the percentage left in the battery reaches 6%. -- Disks: list of pairs of the form (device or mount point, template), - where the template can contain =<size>=, =<free>=, =<used>=, =<freep>= - or =<usedp>=, =<freebar>=, =<freevbar>=, =<freeipat>=, =<usedbar>=, - =<usedvbar>= or =<usedipat>= for total, free, used, free percentage - and used percentage of the given file system capacity. + It is also possible to specify template variables in the =-O= and =-o= + switches, as in the following example: -- Thresholds refer to usage percentage. + #+begin_src haskell + Run BatteryP ["BAT0"] + ["-t", "<acstatus>" + , "-L", "10", "-H", "80" + , "-l", "red", "-h", "green" + , "--", "-O", "Charging", "-o", "Battery: <left>%" + ] 10 + #+end_src -- Args: default monitor arguments. =-t/--template= is ignored. Plus + - The "idle" AC state is selected whenever the AC power entering the + battery is zero. - - =--free-icon-pattern=: dynamic string for free disk space in - =freeipat=. - - =--used-icon-pattern=: dynamic string for used disk space in - =usedipat=. +*** =BatteryN Dirs Args RefreshRate Alias= -- Default template: none (you must specify a template for each file - system). + Works like =BatteryP=, but lets you specify an alias for the monitor + other than "battery". Useful in case you one separate monitors for more + than one battery. +** Cpu and Memory Monitors +*** =Cpu Args RefreshRate= -- Example: + - Aliases to =cpu= + - Args: default monitor arguments, plus: - #+begin_src haskell - DiskU [("/", "<used>/<size>"), ("sdb1", "<usedbar>")] - ["-L", "20", "-H", "50", "-m", "1", "-p", "3"] - 20 - #+end_src + - =--load-icon-pattern=: dynamic string for cpu load in =ipat= -** =DiskIO Disks Args RefreshRate= + - Thresholds refer to percentage of CPU load + - Variables that can be used with the =-t/--template= argument: + =total=, =bar=, =vbar=, =ipat=, =user=, =nice=, =system=, =idle=, + =iowait= + - Default template: =Cpu: <total>%= -- Aliases to =diskio= +*** =MultiCpu Args RefreshRate= -- Disks: list of pairs of the form (device or mount point, template), - where the template can contain =<total>=, =<read>=, =<write>= for - total, read and write speed, respectively, as well as =<totalb>=, - =<readb>=, =<writeb>=, which report number of bytes during the last - refresh period rather than speed. There are also bar versions of each: - =<totalbar>=, =<totalvbar>=, =<totalipat>=, =<readbar>=, =<readvbar>=, - =<readipat>=, =<writebar>=, =<writevbar>=, and =<writeipat>=; and - their "bytes" counterparts: =<totalbbar>=, =<totalbvbar>=, - =<totalbipat>=, =<readbbar>=, =<readbvbar>=, =<readbipat>=, - =<writebbar>=, =<writebvbar>=, and =<writebipat>=. + - Aliases to =multicpu= + - Args: default monitor arguments, plus: -- Thresholds refer to speed in b/s + - =--load-icon-pattern=: dynamic string for overall cpu load in + =ipat=. + - =--load-icon-patterns=: dynamic string for each cpu load in + =autoipat=, =ipat{i}=. This option can be specified several times. + nth option corresponds to nth cpu. + - =--fallback-icon-pattern=: dynamic string used by =autoipat= and + =ipat{i}= when no =--load-icon-patterns= has been provided for + =cpu{i}= + - =--contiguous-icons=: flag (no value needs to be provided) that + causes the load icons to be drawn without padding. -- Args: default monitor arguments. =-t/--template= is ignored. Plus + - Thresholds refer to percentage of CPU load + - Variables that can be used with the =-t/--template= argument: + =autototal=, =autobar=, =autovbar=, =autoipat=, =autouser=, + =autonice=, =autosystem=, =autoidle=, =total=, =bar=, =vbar=, =ipat=, + =user=, =nice=, =system=, =idle=, =total0=, =bar0=, =vbar0=, =ipat0=, + =user0=, =nice0=, =system0=, =idle0=, ... The auto* variables + automatically detect the number of CPUs on the system and display one + entry for each. + - Default template: =Cpu: <total>%= - - =--total-icon-pattern=: dynamic string for total disk I/O in - =<totalipat>=. - - =--write-icon-pattern=: dynamic string for write disk I/O in - =<writeipat>=. - - =--read-icon-pattern=: dynamic string for read disk I/O in - =<readipat>=. +*** =CpuFreq Args RefreshRate= -- Default template: none (you must specify a template for each file - system). + - Aliases to =cpufreq= -- Example: + - Args: default monitor arguments - #+begin_src haskell - DiskIO [("/", "<read> <write>"), ("sdb1", "<total>")] [] 10 - #+end_src + - Thresholds refer to frequency in GHz -** =ThermalZone Number Args RefreshRate= + - Variables that can be used with the =-t/--template= argument: + =cpu0=, =cpu1=, .., =cpuN= -- Aliases to "thermaln": so =ThermalZone 0 []= can be used in template - as =%thermal0%= + - Default template: =Freq: <cpu0>GHz= -- Thresholds refer to temperature in degrees + - This monitor requires acpi_cpufreq module to be loaded in kernel -- Args: default monitor arguments + - Example: -- Variables that can be used with the =-t/--template= argument: =temp= + #+begin_src haskell + Run CpuFreq ["-t", "Freq:<cpu0>|<cpu1>GHz", "-L", "0", "-H", "2", + "-l", "lightblue", "-n","white", "-h", "red"] 50 + #+end_src -- Default template: =<temp>C= +*** =CoreTemp Args RefreshRate= -- This plugin works only on systems with devices having thermal zone. - Check directories in =/sys/class/thermal= for possible values of the - zone number (e.g., 0 corresponds to =thermal_zone0= in that - directory). + - Aliases to =coretemp= -- Example: + - Args: default monitor arguments - #+begin_src haskell - Run ThermalZone 0 ["-t","<id>: <temp>C"] 30 - #+end_src + - Thresholds refer to temperature in degrees -** =Thermal Zone Args RefreshRate= + - Variables that can be used with the =-t/--template= argument: + =core0=, =core1=, .., =coreN= -- *This plugin is deprecated. Use =ThermalZone= instead.* + - Default template: =Temp: <core0>C= -- Aliases to the Zone: so =Thermal "THRM" []= can be used in template as - =%THRM%= + - This monitor requires coretemp module to be loaded in kernel -- Args: default monitor arguments + - Example: -- Thresholds refer to temperature in degrees + #+begin_src haskell + Run CoreTemp ["-t", "Temp:<core0>|<core1>C", + "-L", "40", "-H", "60", + "-l", "lightblue", "-n", "gray90", "-h", "red"] 50 + #+end_src -- Variables that can be used with the =-t/--template= argument: =temp= +*** =MultiCoreTemp Args RefreshRate= -- Default template: =Thm: <temp>C= + - Aliases to =multicoretemp= -- This plugin works only on systems with devices having thermal zone. - Check directories in /proc/acpi/thermal_zone for possible values. + - Args: default monitor arguments, plus: -- Example: + - =--max-icon-pattern=: dynamic string for overall cpu load in + =maxipat=. + - =--avg-icon-pattern=: dynamic string for overall cpu load in + =avgipat=. + - =--mintemp=: temperature in degree Celsius, that sets the lower + limit for percentage calculation. + - =--maxtemp=: temperature in degree Celsius, that sets the upper + limit for percentage calculation. + - =--hwmonitor-path=: this monitor tries to find coretemp devices by + looking for them in directories following the pattern + =/sys/bus/platform/devices/coretemp.*/hwmon/hwmon*=, but some + processors (notably Ryzen) might expose those files in a different + tree (e.g., Ryzen) puts them somewhere in "/sys/class/hwmon/hwmon*", + and the lookup is most costly. With this option, it is possible to + explicitly specify the full path to the directory where the + =tempN_label= and =tempN_input= files are located. - #+begin_src haskell - Run Thermal "THRM" ["-t","iwl4965-temp: <temp>C"] 50 - #+end_src + - Thresholds refer to temperature in degree Celsius -** =CpuFreq Args RefreshRate= + - Variables that can be used with the =-t/--template= argument: =max=, + =maxpc=, =maxbar=, =maxvbar=, =maxipat=, =avg=, =avgpc=, =avgbar=, + =avgvbar=, =avgipat=, =core0=, =core1=, ..., =coreN= -- Aliases to =cpufreq= + The /pc, /bar, /vbar and /ipat variables are showing percentages on + the scale defined by =--mintemp= and =--maxtemp=. The max* and avg* + variables to the highest and the average core temperature. -- Args: default monitor arguments + - Default template: =Temp: <max>°C - <maxpc>%= -- Thresholds refer to frequency in GHz + - This monitor requires coretemp module to be loaded in kernel -- Variables that can be used with the =-t/--template= argument: - =cpu0=, =cpu1=, .., =cpuN= + - Example: -- Default template: =Freq: <cpu0>GHz= + #+begin_src haskell + Run MultiCoreTemp ["-t", "Temp: <avg>°C | <avgpc>%", + "-L", "60", "-H", "80", + "-l", "green", "-n", "yellow", "-h", "red", + "--", "--mintemp", "20", "--maxtemp", "100"] 50 + #+end_src +*** =Memory Args RefreshRate= + + - Aliases to =memory= + - Args: default monitor arguments, plus: + + - =--used-icon-pattern=: dynamic string for used memory ratio in + =usedipat=. + - =--free-icon-pattern=: dynamic string for free memory ratio in + =freeipat=. + - =--available-icon-pattern=: dynamic string for available memory + ratio in =availableipat=. + + - Thresholds refer to percentage of used memory + - Variables that can be used with the =-t/--template= argument: + =total=, =free=, =buffer=, =cache=, =available=, =used=, =usedratio=, + =usedbar=, =usedvbar=, =usedipat=, =freeratio=, =freebar=, =freevbar=, + =freeipat=, =availableratio=, =availablebar=, =availablevbar=, + =availableipat= + - Default template: =Mem: <usedratio>% (<cache>M)= + +*** =Swap Args RefreshRate= + + - Aliases to =swap= + - Args: default monitor arguments + - Thresholds refer to percentage of used swap + - Variables that can be used with the =-t/--template= argument: + =total=, =used=, =free=, =usedratio= + - Default template: =Swap: <usedratio>%= +** Date Monitors +*** =Date Format Alias RefreshRate= + + - Format is a time format string, as accepted by the standard ISO C + =strftime= function (or Haskell's =formatCalendarTime=). Basically, + if =date +"my-string"= works with your command then =Date= will handle + it correctly. + + - Timezone changes are picked up automatically every minute. + + - Sample usage: -- This monitor requires acpi_cpufreq module to be loaded in kernel + #+begin_src haskell + Run Date "%a %b %_d %Y <fc=#ee9a00>%H:%M:%S</fc>" "date" 10 + #+end_src -- Example: +*** =DateZone Format Locale Zone Alias RefreshRate= - #+begin_src haskell - Run CpuFreq ["-t", "Freq:<cpu0>|<cpu1>GHz", "-L", "0", "-H", "2", - "-l", "lightblue", "-n","white", "-h", "red"] 50 - #+end_src + A variant of the =Date= monitor where one is able to explicitly set the + time-zone, as well as the locale. -** =CoreTemp Args RefreshRate= + - The format of =DateZone= is exactly the same as =Date=. -- Aliases to =coretemp= + - If =Locale= is =""= (the empty string) the default locale of the + system is used, otherwise use the given locale. If there are more + instances of =DateZone=, using the empty string as input for =Locale= + is not recommended. -- Args: default monitor arguments + - =Zone= is the name of the =TimeZone=. It is assumed that the time-zone + database is stored in =/usr/share/zoneinfo/=. If the empty string is + given as =Zone=, the default system time is used. -- Thresholds refer to temperature in degrees + - Sample usage: -- Variables that can be used with the =-t/--template= argument: - =core0=, =core1=, .., =coreN= + #+begin_src haskell + Run DateZone "%a %H:%M:%S" "de_DE.UTF-8" "Europe/Vienna" "viennaTime" 10 + #+end_src +** Disk Monitors +*** =DiskU Disks Args RefreshRate= -- Default template: =Temp: <core0>C= + - Aliases to =disku= -- This monitor requires coretemp module to be loaded in kernel + - Disks: list of pairs of the form (device or mount point, template), + where the template can contain =<size>=, =<free>=, =<used>=, =<freep>= + or =<usedp>=, =<freebar>=, =<freevbar>=, =<freeipat>=, =<usedbar>=, + =<usedvbar>= or =<usedipat>= for total, free, used, free percentage + and used percentage of the given file system capacity. -- Example: + - Thresholds refer to usage percentage. - #+begin_src haskell - Run CoreTemp ["-t", "Temp:<core0>|<core1>C", - "-L", "40", "-H", "60", - "-l", "lightblue", "-n", "gray90", "-h", "red"] 50 - #+end_src + - Args: default monitor arguments. =-t/--template= is ignored. Plus -** =MultiCoreTemp Args RefreshRate= + - =--free-icon-pattern=: dynamic string for free disk space in + =freeipat=. + - =--used-icon-pattern=: dynamic string for used disk space in + =usedipat=. -- Aliases to =multicoretemp= + - Default template: none (you must specify a template for each file + system). -- Args: default monitor arguments, plus: + - Example: - - =--max-icon-pattern=: dynamic string for overall cpu load in - =maxipat=. - - =--avg-icon-pattern=: dynamic string for overall cpu load in - =avgipat=. - - =--mintemp=: temperature in degree Celsius, that sets the lower - limit for percentage calculation. - - =--maxtemp=: temperature in degree Celsius, that sets the upper - limit for percentage calculation. - - =--hwmonitor-path=: this monitor tries to find coretemp devices by - looking for them in directories following the pattern - =/sys/bus/platform/devices/coretemp.*/hwmon/hwmon*=, but some - processors (notably Ryzen) might expose those files in a different - tree (e.g., Ryzen) puts them somewhere in "/sys/class/hwmon/hwmon*", - and the lookup is most costly. With this option, it is possible to - explicitly specify the full path to the directory where the - =tempN_label= and =tempN_input= files are located. + #+begin_src haskell + DiskU [("/", "<used>/<size>"), ("sdb1", "<usedbar>")] + ["-L", "20", "-H", "50", "-m", "1", "-p", "3"] + 20 + #+end_src -- Thresholds refer to temperature in degree Celsius +*** =DiskIO Disks Args RefreshRate= -- Variables that can be used with the =-t/--template= argument: =max=, - =maxpc=, =maxbar=, =maxvbar=, =maxipat=, =avg=, =avgpc=, =avgbar=, - =avgvbar=, =avgipat=, =core0=, =core1=, ..., =coreN= + - Aliases to =diskio= - The /pc, /bar, /vbar and /ipat variables are showing percentages on - the scale defined by =--mintemp= and =--maxtemp=. The max* and avg* - variables to the highest and the average core temperature. + - Disks: list of pairs of the form (device or mount point, template), + where the template can contain =<total>=, =<read>=, =<write>= for + total, read and write speed, respectively, as well as =<totalb>=, + =<readb>=, =<writeb>=, which report number of bytes during the last + refresh period rather than speed. There are also bar versions of each: + =<totalbar>=, =<totalvbar>=, =<totalipat>=, =<readbar>=, =<readvbar>=, + =<readipat>=, =<writebar>=, =<writevbar>=, and =<writeipat>=; and + their "bytes" counterparts: =<totalbbar>=, =<totalbvbar>=, + =<totalbipat>=, =<readbbar>=, =<readbvbar>=, =<readbipat>=, + =<writebbar>=, =<writebvbar>=, and =<writebipat>=. -- Default template: =Temp: <max>°C - <maxpc>%= + - Thresholds refer to speed in b/s -- This monitor requires coretemp module to be loaded in kernel + - Args: default monitor arguments. =-t/--template= is ignored. Plus -- Example: + - =--total-icon-pattern=: dynamic string for total disk I/O in + =<totalipat>=. + - =--write-icon-pattern=: dynamic string for write disk I/O in + =<writeipat>=. + - =--read-icon-pattern=: dynamic string for read disk I/O in + =<readipat>=. - #+begin_src haskell - Run MultiCoreTemp ["-t", "Temp: <avg>°C | <avgpc>%", - "-L", "60", "-H", "80", - "-l", "green", "-n", "yellow", "-h", "red", - "--", "--mintemp", "20", "--maxtemp", "100"] 50 - #+end_src + - Default template: none (you must specify a template for each file + system). -** =Volume Mixer Element Args RefreshRate= + - Example: -- Aliases to the mixer name and element name separated by a colon. Thus, - =Volume "default" "Master" [] 10= can be used as =%default:Master%=. -- Args: default monitor arguments. Also accepts: + #+begin_src haskell + DiskIO [("/", "<read> <write>"), ("sdb1", "<total>")] [] 10 + #+end_src - - =-O= /string/ On string +** Keyboard Monitors +*** =Kbd Opts= - - The string used in place of =<status>= when the mixer element is - on. Defaults to "[on]". - - Long option: =--on= + - Registers to XKB/X11-Events and output the currently active keyboard + layout. Supports replacement of layout names. - - =-o= /string/ Off string + - Aliases to =kbd= - - The string used in place of =<status>= when the mixer element is - off. Defaults to "[off]". - - Long option: =--off= + - Opts is a list of tuples: - - =-C= /color/ On color + - first element of the tuple is the search string + - second element of the tuple is the corresponding replacement - - The color to be used for =<status>= when the mixer element is on. - Defaults to "green". - - Long option: =--onc= + - Example: - - =-c= /color/ Off color + #+begin_src haskell + Run Kbd [("us(dvorak)", "DV"), ("us", "US")] + #+end_src - - The color to be used for =<status>= when the mixer element is off. - Defaults to "red". - - Long option: =--offc= +*** =Locks= - - =--highd= /number/ High threshold for dB. Defaults to -5.0. - - =--lowd= /number/ Low threshold for dB. Defaults to -30.0. - - =--volume-icon-pattern= /string/ dynamic string for current volume - in =volumeipat=. - - =-H= /number/ High threshold for volume (in %). Defaults to 60.0. + - Displays the status of Caps Lock, Num Lock and Scroll Lock. - - Long option: =--highv= + - Aliases to =locks= - - =-L= /number/ Low threshold for volume (in %). Defaults to 20.0. + - Example: - - Long option: =--lowv= + #+begin_src haskell + Run Locks + #+end_src +** Process Monitors +*** =TopProc Args RefreshRate= + + - Aliases to =top= + - Args: default monitor arguments. The low and high thresholds (=-L= and + =-H=) denote, for memory entries, the percent of the process memory + over the total amount of memory currently in use and, for cpu entries, + the activity percentage (i.e., the value of =cpuN=, which takes values + between 0 and 100). + - Variables that can be used with the =-t/--template= argument: =no=, + =name1=, =cpu1=, =both1=, =mname1=, =mem1=, =mboth1=, =name2=, =cpu2=, + =both2=, =mname2=, =mem2=, =mboth2=, ... + - Default template: =<both1>= + - Displays the name and cpu/mem usage of running processes (=bothn= and + =mboth= display both, and is useful to specify an overall maximum + and/or minimum width, using the =-m/-M= arguments. =no= gives the + total number of processes. + +*** =TopMem Args RefreshRate= + + - Aliases to =topmem= + - Args: default monitor arguments. The low and high thresholds (=-L= and + =-H=) denote the percent of the process memory over the total amount + of memory currently in use. + - Variables that can be used with the =-t/--template= argument: + =name1=, =mem1=, =both1=, =name2=, =mem2=, =both2=, ... + - Default template: =<both1>= + - Displays the name and RSS (resident memory size) of running processes + (=bothn= displays both, and is useful to specify an overall maximum + and/or minimum width, using the =-m/-M= arguments. +** Thermal Monitors +*** =ThermalZone Number Args RefreshRate= + + - Aliases to "thermaln": so =ThermalZone 0 []= can be used in template + as =%thermal0%= + + - Thresholds refer to temperature in degrees + + - Args: default monitor arguments + + - Variables that can be used with the =-t/--template= argument: =temp= + + - Default template: =<temp>C= + + - This plugin works only on systems with devices having thermal zone. + Check directories in =/sys/class/thermal= for possible values of the + zone number (e.g., 0 corresponds to =thermal_zone0= in that + directory). + + - Example: - - =-h=: /string/ High string + #+begin_src haskell + Run ThermalZone 0 ["-t","<id>: <temp>C"] 30 + #+end_src - - The string added in front of =<status>= when the mixer element is - on and the volume percentage is higher than the =-H= threshold. - Defaults to "". - - Long option: =--highs= +*** =Thermal Zone Args RefreshRate= - - =-m=: /string/ Medium string + - *This plugin is deprecated. Use =ThermalZone= instead.* - - The string added in front of =<status>= when the mixer element is - on and the volume percentage is lower than the =-H= threshold. - Defaults to "". - - Long option: =--mediums= + - Aliases to the Zone: so =Thermal "THRM" []= can be used in template as + =%THRM%= - - =-l=: /string/ Low string + - Args: default monitor arguments - - The string added in front of =<status>= when the mixer element is - on and the volume percentage is lower than the =-L= threshold. - Defaults to "". - - Long option: =--lows= + - Thresholds refer to temperature in degrees -- Variables that can be used with the =-t/--template= argument: - =volume=, =volumebar=, =volumevbar=, =volumeipat=, =dB=, =status=, - =volumestatus= -- Note that =dB= might only return 0 on your system. This is known to - happen on systems with a pulseaudio backend. -- Default template: =Vol: <volume>% <status>= -- Requires the package [[http://hackage.haskell.org/package/alsa-core][alsa-core]] and [[http://hackage.haskell.org/package/alsa-mixer][alsa-mixer]] installed in your - system. In addition, to activate this plugin you must pass the - =with_alsa= flag during compilation. + - Variables that can be used with the =-t/--template= argument: =temp= -** =Alsa Mixer Element Args= + - Default template: =Thm: <temp>C= -Like [[=Volume Mixer Element Args RefreshRate=][Volume]] but with the following differences: + - This plugin works only on systems with devices having thermal zone. + Check directories in /proc/acpi/thermal_zone for possible values. -- Uses event-based refreshing via =alsactl monitor= instead of polling, - so it will refresh instantly when there's a volume change, and won't - use CPU until a change happens. -- Aliases to =alsa:= followed by the mixer name and element name - separated by a colon. Thus, =Alsa "default" "Master" []= can be used - as =%alsa:default:Master%=. -- Additional options (after the =--=): - - =--alsactl=/path/to/alsactl=: If this option is not specified, - =alsactl= will be sought in your =PATH= first, and failing that, at - =/usr/sbin/alsactl= (this is its location on Debian systems. - =alsactl monitor= works as a non-root user despite living in - =/usr/sbin=.). - - =stdbuf= (from coreutils) must be (and most probably already is) in - your =PATH=. + - Example: -** =MPD Args RefreshRate= + #+begin_src haskell + Run Thermal "THRM" ["-t","iwl4965-temp: <temp>C"] 50 + #+end_src +** Volume Monitors +*** =Volume Mixer Element Args RefreshRate= -- This monitor will only be compiled if you ask for it using the - =with_mpd= flag. It needs [[http://hackage.haskell.org/package/libmpd/][libmpd]] 5.0 or later (available on Hackage). + - Aliases to the mixer name and element name separated by a colon. Thus, + =Volume "default" "Master" [] 10= can be used as =%default:Master%=. + - Args: default monitor arguments. Also accepts: -- Aliases to =mpd= + - =-O= /string/ On string -- Args: default monitor arguments. In addition you can provide =-P=, - =-S= and =-Z=, with an string argument, to represent the playing, - stopped and paused states in the =statei= template field. The - environment variables =MPD_HOST= and =MPD_PORT= are used to configure - the mpd server to communicate with, unless given in the additional - arguments =-p= (=--port=) and =-h= (=--host=). Also available: + - The string used in place of =<status>= when the mixer element is + on. Defaults to "[on]". + - Long option: =--on= - - =lapsed-icon-pattern=: dynamic string for current track position in - =ipat=. + - =-o= /string/ Off string -- Variables that can be used with the =-t/--template= argument: =bar=, - =vbar=, =ipat=, =state=, =statei=, =volume=, =length=, =lapsed=, - =remaining=, =plength= (playlist length), =ppos= (playlist position), - =flags= (ncmpcpp-style playback mode), =name=, =artist=, =composer=, - =performer=, =album=, =title=, =track=, =file=, =genre=, =date= + - The string used in place of =<status>= when the mixer element is + off. Defaults to "[off]". + - Long option: =--off= -- Default template: =MPD: <state>= + - =-C= /color/ On color -- Example (note that you need "--" to separate regular monitor options - from MPD's specific ones): + - The color to be used for =<status>= when the mixer element is on. + Defaults to "green". + - Long option: =--onc= - #+begin_src haskell - Run MPD ["-t", - "<composer> <title> (<album>) <track>/<plength> <statei> [<flags>]", - "--", "-P", ">>", "-Z", "|", "-S", "><"] 10 - #+end_src + - =-c= /color/ Off color -** =MPDX Args RefreshRate Alias= + - The color to be used for =<status>= when the mixer element is off. + Defaults to "red". + - Long option: =--offc= -Like =MPD= but uses as alias its last argument instead of "mpd". + - =--highd= /number/ High threshold for dB. Defaults to -5.0. + - =--lowd= /number/ Low threshold for dB. Defaults to -30.0. + - =--volume-icon-pattern= /string/ dynamic string for current volume + in =volumeipat=. + - =-H= /number/ High threshold for volume (in %). Defaults to 60.0. -** =Mpris1 PlayerName Args RefreshRate= + - Long option: =--highv= -- Aliases to =mpris1= + - =-L= /number/ Low threshold for volume (in %). Defaults to 20.0. -- Requires [[http://hackage.haskell.org/package/dbus][dbus]] and [[http://hackage.haskell.org/package/text][text]] packages. To activate, pass the =with_mpris= - flag during compilation. + - Long option: =--lowv= -- PlayerName: player supporting MPRIS v1 protocol. Some players need - this to be an all lowercase name (e.g. "spotify"), but some others - don't. + - =-h=: /string/ High string -- Args: default monitor arguments. + - The string added in front of =<status>= when the mixer element is + on and the volume percentage is higher than the =-H= threshold. + Defaults to "". + - Long option: =--highs= -- Variables that can be used with the =-t/--template= argument: - =album=, =artist=, =arturl=, =length=, =title=, =tracknumber= + - =-m=: /string/ Medium string -- Default template: =<artist> - <title>= + - The string added in front of =<status>= when the mixer element is + on and the volume percentage is lower than the =-H= threshold. + Defaults to "". + - Long option: =--mediums= -- Example: + - =-l=: /string/ Low string - #+begin_src haskell - Run Mpris1 "clementine" ["-t", "<artist> - [<tracknumber>] <title>"] 10 - #+end_src + - The string added in front of =<status>= when the mixer element is + on and the volume percentage is lower than the =-L= threshold. + Defaults to "". + - Long option: =--lows= -** =Mpris2 PlayerName Args RefreshRate= + - Variables that can be used with the =-t/--template= argument: + =volume=, =volumebar=, =volumevbar=, =volumeipat=, =dB=, =status=, + =volumestatus= + - Note that =dB= might only return 0 on your system. This is known to + happen on systems with a pulseaudio backend. + - Default template: =Vol: <volume>% <status>= + - Requires the package [[http://hackage.haskell.org/package/alsa-core][alsa-core]] and [[http://hackage.haskell.org/package/alsa-mixer][alsa-mixer]] installed in your + system. In addition, to activate this plugin you must pass the + =with_alsa= flag during compilation. -- Aliases to =mpris2= +*** =Alsa Mixer Element Args= -- Requires [[http://hackage.haskell.org/package/dbus][dbus]] and [[http://hackage.haskell.org/package/text][text]] packages. To activate, pass the =with_mpris= - flag during compilation. + Like [[=Volume Mixer Element Args RefreshRate=][Volume]] but with the following differences: -- PlayerName: player supporting MPRIS v2 protocol. Some players need - this to be an all lowercase name (e.g. "spotify"), but some others - don't. + - Uses event-based refreshing via =alsactl monitor= instead of polling, + so it will refresh instantly when there's a volume change, and won't + use CPU until a change happens. + - Aliases to =alsa:= followed by the mixer name and element name + separated by a colon. Thus, =Alsa "default" "Master" []= can be used + as =%alsa:default:Master%=. + - Additional options (after the =--=): + - =--alsactl=/path/to/alsactl=: If this option is not specified, + =alsactl= will be sought in your =PATH= first, and failing that, at + =/usr/sbin/alsactl= (this is its location on Debian systems. + =alsactl monitor= works as a non-root user despite living in + =/usr/sbin=.). + - =stdbuf= (from coreutils) must be (and most probably already is) in + your =PATH=. +** Mail Monitors +*** =Mail Args Alias= -- Args: default monitor arguments. + - Args: list of maildirs in form =[("name1","path1"),...]=. Paths may + start with a '~' to expand to the user's home directory. -- Variables that can be used with the =-t/--template= argument: - =album=, =artist=, =arturl=, =length=, =title=, =tracknumber=, - =composer=, =genre= + - This plugin requires inotify support in your Linux kernel and the + [[http://hackage.haskell.org/package/hinotify/][hinotify]] package. To activate, pass the =with_inotify= flag during + compilation. -- Default template: =<artist> - <title>= + - Example: -- Example: + #+begin_src haskell + Run Mail [("inbox", "~/var/mail/inbox"), + ("lists", "~/var/mail/lists")] + "mail" + #+end_src - #+begin_src haskell - Run Mpris2 "spotify" ["-t", "<artist> - [<composer>] <title>"] 10 - #+end_src +*** =MailX Args Opts Alias= -** =Mail Args Alias= + - Args: list of maildirs in form =[("name1","path1","color1"),...]=. + Paths may start with a '~' to expand to the user's home directory. + When mails are present, counts are displayed with the given name and + color. -- Args: list of maildirs in form =[("name1","path1"),...]=. Paths may - start with a '~' to expand to the user's home directory. + - Opts is a possibly empty list of options, as flags. Possible values: + -d dir --dir dir a string giving the base directory where maildir + files with a relative path live. -p prefix --prefix prefix a string + giving a prefix for the list of displayed mail counts -s suffix + --suffix suffix a string giving a suffix for the list of displayed + mail counts -- This plugin requires inotify support in your Linux kernel and the - [[http://hackage.haskell.org/package/hinotify/][hinotify]] package. To activate, pass the =with_inotify= flag during - compilation. + - This plugin requires inotify support in your Linux kernel and the + [[http://hackage.haskell.org/package/hinotify/][hinotify]] package. To activate, pass the =with_inotify= flag during + compilation. -- Example: + - Example: - #+begin_src haskell - Run Mail [("inbox", "~/var/mail/inbox"), - ("lists", "~/var/mail/lists")] - "mail" - #+end_src + #+begin_src haskell + Run MailX [("I", "inbox", "green"), + ("L", "lists", "orange")] + ["-d", "~/var/mail", "-p", " ", "-s", " "] + "mail" + #+end_src -** =MailX Args Opts Alias= +*** =MBox Mboxes Opts Alias= -- Args: list of maildirs in form =[("name1","path1","color1"),...]=. - Paths may start with a '~' to expand to the user's home directory. - When mails are present, counts are displayed with the given name and - color. + - Mboxes a list of mbox files of the form =[("name", "path", "color")]=, + where name is the displayed name, path the absolute or relative (to + BaseDir) path of the mbox file, and color the color to use to display + the mail count (use an empty string for the default). -- Opts is a possibly empty list of options, as flags. Possible values: - -d dir --dir dir a string giving the base directory where maildir - files with a relative path live. -p prefix --prefix prefix a string - giving a prefix for the list of displayed mail counts -s suffix - --suffix suffix a string giving a suffix for the list of displayed - mail counts + - Opts is a possibly empty list of options, as flags. Possible values: + -a --all (no arg) Show all mailboxes, even if empty. -u (no arg) Show + only the mailboxes' names, sans counts. -d dir --dir dir a string + giving the base directory where mbox files with a relative path live. + -p prefix --prefix prefix a string giving a prefix for the list of + displayed mail counts -s suffix --suffix suffix a string giving a + suffix for the list of displayed mail counts -- This plugin requires inotify support in your Linux kernel and the - [[http://hackage.haskell.org/package/hinotify/][hinotify]] package. To activate, pass the =with_inotify= flag during - compilation. + - Paths may start with a '~' to expand to the user's home directory. -- Example: + - This plugin requires inotify support in your Linux kernel and the + [[http://hackage.haskell.org/package/hinotify/][hinotify]] package. To activate, pass the =with_inotify= flag during + compilation. - #+begin_src haskell - Run MailX [("I", "inbox", "green"), - ("L", "lists", "orange")] - ["-d", "~/var/mail", "-p", " ", "-s", " "] - "mail" - #+end_src + - Example. The following command look for mails in =/var/mail/inbox= and + =~/foo/mbox=, and will put a space in front of the printed string + (when it's not empty); it can be used in the template with the alias + =mbox=: -** =MBox Mboxes Opts Alias= + #+begin_src haskell + Run MBox [("I ", "inbox", "red"), ("O ", "~/foo/mbox", "")] + ["-d", "/var/mail/", "-p", " "] "mbox" + #+end_src -- Mboxes a list of mbox files of the form =[("name", "path", "color")]=, - where name is the displayed name, path the absolute or relative (to - BaseDir) path of the mbox file, and color the color to use to display - the mail count (use an empty string for the default). +*** =NotmuchMail Alias Args Rate= -- Opts is a possibly empty list of options, as flags. Possible values: - -a --all (no arg) Show all mailboxes, even if empty. -u (no arg) Show - only the mailboxes' names, sans counts. -d dir --dir dir a string - giving the base directory where mbox files with a relative path live. - -p prefix --prefix prefix a string giving a prefix for the list of - displayed mail counts -s suffix --suffix suffix a string giving a - suffix for the list of displayed mail counts + This plugin checks for new mail, provided that this mail is indexed by + =notmuch=. In the =notmuch= spirit, this plugin checks for new *threads* + and not new individual messages. -- Paths may start with a '~' to expand to the user's home directory. + - Alias: What name the plugin should have in your template string. -- This plugin requires inotify support in your Linux kernel and the - [[http://hackage.haskell.org/package/hinotify/][hinotify]] package. To activate, pass the =with_inotify= flag during - compilation. + - Args: A list of =MailItem= s of the form -- Example. The following command look for mails in =/var/mail/inbox= and - =~/foo/mbox=, and will put a space in front of the printed string - (when it's not empty); it can be used in the template with the alias - =mbox=: + #+begin_src haskell + [ MailItem "name" "address" "query" + ... + ] + #+end_src - #+begin_src haskell - Run MBox [("I ", "inbox", "red"), ("O ", "~/foo/mbox", "")] - ["-d", "/var/mail/", "-p", " "] "mbox" - #+end_src + or, using explicit record syntax: -** =NotmuchMail Alias Args Rate= + #+begin_src haskell + [ MailItem + { name = "name" + , address = "address" + , query = "query" + } + ... + ] + #+end_src -This plugin checks for new mail, provided that this mail is indexed by -=notmuch=. In the =notmuch= spirit, this plugin checks for new *threads* -and not new individual messages. + where -- Alias: What name the plugin should have in your template string. + - =name= is what gets printed in the status bar before the number of + new threads. + - =address= is the e-mail address of the recipient, i.e. we only query + mail that was send to this particular address (in more concrete + terms, we pass the address to the =to:= constructor when performing + the search). If =address= is empty, we search through all unread + mail, regardless of whom it was sent to. + - =query= is funneled to =notmuch search= verbatim. For the general + query syntax, consult =notmuch search --help=, as well as + =notmuch-search-terms(7)=. Note that the =unread= tag is *always* + added in front of the query and composed with it via an *and*. -- Args: A list of =MailItem= s of the form + - Rate: Rate with which to update the plugin (in deciseconds). - #+begin_src haskell - [ MailItem "name" "address" "query" - ... - ] - #+end_src + - Example: - or, using explicit record syntax: + - A single =MailItem= that displays all unread threads from the given + address: - #+begin_src haskell - [ MailItem - { name = "name" - , address = "address" - , query = "query" - } - ... - ] - #+end_src + #+begin_src haskell + MailItem "mbs:" "soliditsallgood@mailbox.org" "" + #+end_src - where + - A single =MailItem= that displays all unread threads with + "[My-Subject]" somewhere in the title: - - =name= is what gets printed in the status bar before the number of - new threads. - - =address= is the e-mail address of the recipient, i.e. we only query - mail that was send to this particular address (in more concrete - terms, we pass the address to the =to:= constructor when performing - the search). If =address= is empty, we search through all unread - mail, regardless of whom it was sent to. - - =query= is funneled to =notmuch search= verbatim. For the general - query syntax, consult =notmuch search --help=, as well as - =notmuch-search-terms(7)=. Note that the =unread= tag is *always* - added in front of the query and composed with it via an *and*. + #+begin_src haskell + MailItem "S:" "" "subject:[My-Subject]" + #+end_src -- Rate: Rate with which to update the plugin (in deciseconds). + - A full example of a =NotmuchMail= configuration: -- Example: + #+begin_src haskell + Run NotmuchMail "mail" -- name for the template string + [ -- All unread mail to the below address, but nothing that's tagged + -- with @lists@ or @haskell@. + MailItem "mbs:" + "soliditsallgood@mailbox.org" + "not tag:lists and not tag:haskell" - - A single =MailItem= that displays all unread threads from the given - address: + -- All unread mail that has @[Haskell-Cafe]@ in the subject line. + , MailItem "C:" "" "subject:[Haskell-Cafe]" - #+begin_src haskell - MailItem "mbs:" "soliditsallgood@mailbox.org" "" - #+end_src + -- All unread mail that's tagged as @lists@, but not @haskell@. + , MailItem "H:" "" "tag:lists and not tag:haskell" + ] + 600 -- update every 60 seconds + #+end_src - - A single =MailItem= that displays all unread threads with - "[My-Subject]" somewhere in the title: +** Music Monitors +*** =MPD Args RefreshRate= - #+begin_src haskell - MailItem "S:" "" "subject:[My-Subject]" - #+end_src + - This monitor will only be compiled if you ask for it using the + =with_mpd= flag. It needs [[http://hackage.haskell.org/package/libmpd/][libmpd]] 5.0 or later (available on Hackage). - - A full example of a =NotmuchMail= configuration: + - Aliases to =mpd= - #+begin_src haskell - Run NotmuchMail "mail" -- name for the template string - [ -- All unread mail to the below address, but nothing that's tagged - -- with @lists@ or @haskell@. - MailItem "mbs:" - "soliditsallgood@mailbox.org" - "not tag:lists and not tag:haskell" + - Args: default monitor arguments. In addition you can provide =-P=, + =-S= and =-Z=, with an string argument, to represent the playing, + stopped and paused states in the =statei= template field. The + environment variables =MPD_HOST= and =MPD_PORT= are used to configure + the mpd server to communicate with, unless given in the additional + arguments =-p= (=--port=) and =-h= (=--host=). Also available: - -- All unread mail that has @[Haskell-Cafe]@ in the subject line. - , MailItem "C:" "" "subject:[Haskell-Cafe]" + - =lapsed-icon-pattern=: dynamic string for current track position in + =ipat=. - -- All unread mail that's tagged as @lists@, but not @haskell@. - , MailItem "H:" "" "tag:lists and not tag:haskell" - ] - 600 -- update every 60 seconds - #+end_src + - Variables that can be used with the =-t/--template= argument: =bar=, + =vbar=, =ipat=, =state=, =statei=, =volume=, =length=, =lapsed=, + =remaining=, =plength= (playlist length), =ppos= (playlist position), + =flags= (ncmpcpp-style playback mode), =name=, =artist=, =composer=, + =performer=, =album=, =title=, =track=, =file=, =genre=, =date= -** =XPropertyLog PropName= + - Default template: =MPD: <state>= -- Aliases to =PropName= -- Reads the X property named by =PropName= (a string) and displays its - value. The [[https://github.com/jaor/xmobar/raw/master/examples/xmonadpropwrite.hs][examples/xmonadpropwrite.hs script]] in xmobar's distribution - can be used to set the given property from the output of any other - program or script. + - Example (note that you need "--" to separate regular monitor options + from MPD's specific ones): -** =UnsafeXPropertyLog PropName= + #+begin_src haskell + Run MPD ["-t", + "<composer> <title> (<album>) <track>/<plength> <statei> [<flags>]", + "--", "-P", ">>", "-Z", "|", "-S", "><"] 10 + #+end_src -- Aliases to =PropName= -- Same as =XPropertyLog=, but the input is not filtered to avoid - injection of actions (cf. =UnsafeXMonadLog=). The program writing the - value of the read property is responsible of performing any needed - cleanups. +*** =MPDX Args RefreshRate Alias= -** =NamedXPropertyLog PropName Alias= + Like =MPD= but uses as alias its last argument instead of "mpd". -- Aliases to =Alias= -- Same as =XPropertyLog=, but a custom alias can be specified. +*** =Mpris1 PlayerName Args RefreshRate= -** =UnsafeNamedXPropertyLog PropName Alias= + - Aliases to =mpris1= -- Aliases to =Alias= -- Same as =UnsafeXPropertyLog=, but a custom alias can be specified. + - Requires [[http://hackage.haskell.org/package/dbus][dbus]] and [[http://hackage.haskell.org/package/text][text]] packages. To activate, pass the =with_mpris= + flag during compilation. -** =Brightness Args RefreshRate= + - PlayerName: player supporting MPRIS v1 protocol. Some players need + this to be an all lowercase name (e.g. "spotify"), but some others + don't. -- Aliases to =bright= + - Args: default monitor arguments. -- Args: default monitor arguments, plus the following specif ones: + - Variables that can be used with the =-t/--template= argument: + =album=, =artist=, =arturl=, =length=, =title=, =tracknumber= - - =-D=: directory in =/sys/class/backlight/= with files in it - (default: "acpi_video0") - - =-C=: file with the current brightness (default: actual_brightness) - - =-M=: file with the maximum brightness (default: max_brightness) - - =--brightness-icon-pattern=: dynamic string for current brightness - in =ipat=. + - Default template: =<artist> - <title>= -- Variables that can be used with the =-t/--template= argument: - =vbar=, =percent=, =bar=, =ipat= + - Example: -- Default template: =<percent>= + #+begin_src haskell + Run Mpris1 "clementine" ["-t", "<artist> - [<tracknumber>] <title>"] 10 + #+end_src -- Example: +*** =Mpris2 PlayerName Args RefreshRate= - #+begin_src haskell - Run Brightness ["-t", "<bar>"] 60 - #+end_src + - Aliases to =mpris2= -** =Kbd Opts= + - Requires [[http://hackage.haskell.org/package/dbus][dbus]] and [[http://hackage.haskell.org/package/text][text]] packages. To activate, pass the =with_mpris= + flag during compilation. -- Registers to XKB/X11-Events and output the currently active keyboard - layout. Supports replacement of layout names. + - PlayerName: player supporting MPRIS v2 protocol. Some players need + this to be an all lowercase name (e.g. "spotify"), but some others + don't. -- Aliases to =kbd= + - Args: default monitor arguments. -- Opts is a list of tuples: + - Variables that can be used with the =-t/--template= argument: + =album=, =artist=, =arturl=, =length=, =title=, =tracknumber=, + =composer=, =genre= - - first element of the tuple is the search string - - second element of the tuple is the corresponding replacement + - Default template: =<artist> - <title>= -- Example: + - Example: - #+begin_src haskell - Run Kbd [("us(dvorak)", "DV"), ("us", "US")] - #+end_src + #+begin_src haskell + Run Mpris2 "spotify" ["-t", "<artist> - [<composer>] <title>"] 10 + #+end_src +** Network Monitors +*** =Network Interface Args RefreshRate= + + - Aliases to the interface name: so =Network "eth0" []= can be used as + =%eth0%= + - Thresholds refer to velocities expressed in Kb/s + - Args: default monitor arguments, plus: + + - =--rx-icon-pattern=: dynamic string for reception rate in =rxipat=. + - =--tx-icon-pattern=: dynamic string for transmission rate in + =txipat=. + - =--up=: string used for the =up= variable value when the interface + is up. + + - Variables that can be used with the =-t=/=--template= argument: =dev=, + =rx=, =tx=, =rxbar=, =rxvbar=, =rxipat=, =txbar=, =txvbar=, =txipat=, + =up=. Reception and transmission rates (=rx= and =tx=) are displayed + by default as Kb/s, without any suffixes, but you can set the =-S= to + "True" to make them displayed with adaptive units (Kb/s, Mb/s, etc.). + - Default template: =<dev>: <rx>KB|<tx>KB= + +*** =DynNetwork Args RefreshRate= + + - Active interface is detected automatically + - Aliases to "dynnetwork" + - Thresholds are expressed in Kb/s + - Args: default monitor arguments, plus: + + - =--rx-icon-pattern=: dynamic string for reception rate in =rxipat=. + - =--tx-icon-pattern=: dynamic string for transmission rate in =txipat= + - =--devices=: comma-separated list of devices to show. + + - Variables that can be used with the =-t=/=--template= argument: + =dev=, =rx=, =tx=, =rxbar=, =rxvbar=, =rxipat=, =txbar=, =txvbar=, + =txipat=. + + Reception and transmission rates (=rx= and =tx=) are displayed in Kbytes + per second, and you can set the =-S= to "True" to make them displayed + with units (the string "Kb/s"). + - Default template: =<dev>: <rx>KB|<tx>KB= + - Example of usage of =--devices= option: + + =["--", "--devices", "wlp2s0,enp0s20f41"]= + +*** =Wireless Interface Args RefreshRate= + + - If set to "", first suitable wireless interface is used. + - Aliases to the interface name with the suffix "wi": thus, + =Wireless "wlan0" []= can be used as =%wlan0wi%=, and + =Wireless "" []= as =%wi%=. + - Args: default monitor arguments, plus: + + - =--quality-icon-pattern=: dynamic string for connection quality in + =qualityipat=. + + - Variables that can be used with the =-t=/=--template= argument: + =ssid=, =signal=, =quality=, =qualitybar=, =qualityvbar=, + =qualityipat= + - Thresholds refer to link quality on a =[0, 100]= scale. Note that + =quality= is calculated from =signal= (in dBm) by a possibly lossy + conversion. It is also not taking into account many factors such as + noise level, air busy time, transcievers' capabilities and the others + which can have drastic impact on the link performance. + - Default template: =<ssid> <quality>= + - To activate this plugin you must pass the =with_nl80211= or the + =with_iwlib= flag during compilation. +** Weather Monitors +*** =Weather StationID Args RefreshRate= + + - Aliases to the Station ID: so =Weather "LIPB" []= can be used in + template as =%LIPB%= + - Thresholds refer to temperature in the selected units + - Args: default monitor arguments, plus: + + - =--weathers= /string/ : display a default string when the =weather= + variable is not reported. + + - short option: =-w= + - Default: "" + + - =--useManager= /bool/ : Whether to use one single manager per + monitor for managing network connections or create a new one every + time a connection is made. + + - Short option: =-m= + - Default: True + + - Variables that can be used with the =-t/--template= argument: + =station=, =stationState=, =year=, =month=, =day=, =hour=, + =windCardinal=, =windAzimuth=, =windMph=, =windKnots=, =windMs=, + =windKmh= =visibility=, =skyCondition=, =weather=, =tempC=, =tempF=, + =dewPointC=, =dewPointF=, =rh=, =pressure= + - Default template: =<station>: <tempC>C, rh <rh>% (<hour>)= + - Retrieves weather information from http://tgftp.nws.noaa.gov. Here is + an [[https://tgftp.nws.noaa.gov/data/observations/metar/decoded/CYLD.TXT][example]], also showcasing the kind of information that may be + extracted. + +*** =WeatherX StationID SkyConditions Args RefreshRate= + + - Works in the same way as =Weather=, but takes an additional argument, + a list of pairs from sky conditions to their replacement (typically a + unicode string or an icon specification). + - Use the variable =skyConditionS= to display the replacement of the + corresponding sky condition. All other =Weather= template variables + are available as well. + + For example: + + #+begin_src haskell + WeatherX "LEBL" + [ ("clear", "🌣") + , ("sunny", "🌣") + , ("mostly clear", "🌤") + , ("mostly sunny", "🌤") + , ("partly sunny", "⛅") + , ("fair", "🌑") + , ("cloudy","☁") + , ("overcast","☁") + , ("partly cloudy", "⛅") + , ("mostly cloudy", "🌧") + , ("considerable cloudiness", "⛈")] + ["-t", "<fn=2><skyConditionS></fn> <tempC>° <rh>% <windKmh> (<hour>)" + , "-L","10", "-H", "25", "--normal", "black" + , "--high", "lightgoldenrod4", "--low", "darkseagreen4"] + 18000 + #+end_src + + As mentioned, the replacement string can also be an icon specification, + such as =("clear", "<icon=weather-clear.xbm/>")=. +** Other Monitors +*** =Brightness Args RefreshRate= + + - Aliases to =bright= + + - Args: default monitor arguments, plus the following specif ones: + + - =-D=: directory in =/sys/class/backlight/= with files in it + (default: "acpi_video0") + - =-C=: file with the current brightness (default: actual_brightness) + - =-M=: file with the maximum brightness (default: max_brightness) + - =--brightness-icon-pattern=: dynamic string for current brightness + in =ipat=. + + - Variables that can be used with the =-t/--template= argument: + =vbar=, =percent=, =bar=, =ipat= + + - Default template: =<percent>= + + - Example: -** =Locks= + #+begin_src haskell + Run Brightness ["-t", "<bar>"] 60 + #+end_src -- Displays the status of Caps Lock, Num Lock and Scroll Lock. +*** =CatInt n filename= -- Aliases to =locks= + - Reads and displays an integer from the file whose path is =filename= + (especially useful with files in =/sys=). -- Example: + - Aliases as =catn= (e.g. =Cat 0= as =cat0=, etc.) so you can have + several. - #+begin_src haskell - Run Locks - #+end_src + - Example: -** =CatInt n filename= + #+begin_src haskell + Run CatInt 0 "/sys/devices/platform/thinkpad_hwmon/fan1_input" [] 50 + #+end_src -- Reads and displays an integer from the file whose path is =filename= - (especially useful with files in =/sys=). +*** =CommandReader "/path/to/program" Alias= -- Aliases as =catn= (e.g. =Cat 0= as =cat0=, etc.) so you can have - several. + - Runs the given program, and displays its standard output. -- Example: +*** =Uptime Args RefreshRate= - #+begin_src haskell - Run CatInt 0 "/sys/devices/platform/thinkpad_hwmon/fan1_input" [] 50 - #+end_src + - Aliases to =uptime= + - Args: default monitor arguments. The low and high thresholds refer to + the number of days. + - Variables that can be used with the =-t/--template= argument: =days=, + =hours=, =minutes=, =seconds=. The total uptime is the sum of all + those fields. You can set the =-S= argument to =True= to add units to + the display of those numeric fields. + - Default template: =Up: <days>d <hours>h <minutes>m= -** =UVMeter= +*** =UVMeter= -- Aliases to "uv" + station id. For example: =%uv Brisbane%= or - =%uv Alice Springs%= + - Aliases to "uv" + station id. For example: =%uv Brisbane%= or + =%uv Alice Springs%= -- Args: default monitor arguments, plus: + - Args: default monitor arguments, plus: - - =--useManager= /bool/ : Whether to use one single manager per - monitor for managing network connections or create a new one every - time a connection is made. + - =--useManager= /bool/ : Whether to use one single manager per + monitor for managing network connections or create a new one every + time a connection is made. - - Short option: =-m= - - Default: True + - Short option: =-m= + - Default: True -- /Reminder:/ Keep the refresh rate high, to avoid making unnecessary - requests every time the plug-in is run. + - /Reminder:/ Keep the refresh rate high, to avoid making unnecessary + requests every time the plug-in is run. -- Station IDs can be found here: - http://www.arpansa.gov.au/uvindex/realtime/xml/uvvalues.xml + - Station IDs can be found here: + http://www.arpansa.gov.au/uvindex/realtime/xml/uvvalues.xml -- Example: + - Example: - #+begin_src haskell - Run UVMeter "Brisbane" ["-H", "3", "-L", "3", "--low", "green", "--high", "red"] 900 - #+end_src + #+begin_src haskell + Run UVMeter "Brisbane" ["-H", "3", "-L", "3", "--low", "green", "--high", "red"] 900 + #+end_src * Interfacing with Window Managers |