summaryrefslogtreecommitdiffhomepage
AgeCommit message (Collapse)Author
2012-09-14removed todo commentsReto Habluetzel
2012-09-11Avoiding X server leaks with XftColor cacheJose Antonio Ortega Ruiz
This patch is a first complete solution to the long-standing memory leak (on the X server side) caused by repeteadly asking the server to allocate XftColor instances. Despite the fact that we were freeing them, the server didn't seem to care... this was also happening for non-Xft Colors, and solved in the same way we'd done here, i.e., by caching XftColor instances. And additional complication has been that Graphics.X11.Xft doesn't export any function to create and retain an XftColor, nor the necessary datatype constructors to write a compatible version outside the module (there's no way to construct an XftColor instance to pass to the other functions in the library). So, i've created my own lite version of the whole module, until the day it supports XftColor creation.
2012-09-10New module ColorCacheJose Antonio Ortega Ruiz
2012-09-09Missing Window module in cabal fileJose Antonio Ortega Ruiz
2012-09-09Correct vertical alignment for XFT fontsJose Antonio Ortega Ruiz
2012-09-04automatic detection of devices using /sys/class/net directoryReto Habluetzel
2012-09-01Some cosmetic fixes.Jochen Keil
I tried to scrap the hide/reveal boilerplate, but that didn't work out due different functions ({show,hide}Window) and signaltypes. Got almost as ugly. Maybe a pattern matching function instead of the "case typ of" would be nicer. But that's just code golfing.
2012-09-01Set StrutValues from showWindowJochen Keil
This is superior to calling the repositionWin function. It will only set the StrutValues and avoid additional work. This means, that extra parameters need to be passed down to showWindow. However, that is not a problem here.
2012-09-01Set StrutValues only if window is actually mappedJochen Keil
For a ChangeScreen or Reposition signal the setProperties function is called which sets the StrutValues regardless of the mapping state. This means that for an unmapped window a window manager will produce an empty gap. Fixing this is easy. Just set the StrutValues to 0.
2012-09-01Pass the timeout value unchanged to the toggle functionJochen Keil
Since the timeout is passed on as hide or reveal signal, it must not be changed or the multiplications will pile up.
2012-09-01Send hide or reveal signal for togglingJochen Keil
This is a more abstract way of implementing the Toggle operation.
2012-08-30Revert "News and credits for the new dock mode support"Jose Antonio Ortega Ruiz
This reverts commit f7076307b7e896e6d776e319fddff860b63f735f.
2012-08-30Revert "Add '-d' for dockapp mode"Jose Antonio Ortega Ruiz
This reverts commit cae6f2bc049d4b7ed57a7a18a828bc4ea35df4aa, until we find a reason why it's causing high CPU consumption in the X server.
2012-08-29cleaned up imports, renamed variableReto Habluetzel
2012-08-29added dynnetwork, which selects the busiest network of a list and displays itReto Habluetzel
2012-08-29News and credits for the new dock mode supportJose Antonio Ortega Ruiz
2012-08-29Add '-d' for dockapp modeArnout
This makes xmobar work in windowmanagers that support _NET_WM_WINDOW_TYPE_DOCK but not _NET_WM_STRUT, such as Notion
2012-08-27description for PipeReader2Reto Habluetzel
2012-08-27added PipeReader2 which accepts a defaultReto Habluetzel
2012-08-22Merge remote-tracking branch 'jrk/dbusstuff' into jrkJose Antonio Ortega Ruiz
2012-08-22Merge remote-tracking branch 'jrk/replacemvar' into jrkJose Antonio Ortega Ruiz
Conflicts: readme.md
2012-08-22Configuration example for XMonad using the DBus interfaceJochen Keil
Mainly code from my config which does the following: When I press my modifier key (which is xK_Alt_L) then xmobar appears. When I keep the key pressed for longer than 400ms (which is often the when tabbing through windows, changing workspaces, etc), then upon release xmobar will be hidden immediately. If I press xK_Alt_L for less than 400ms (very briefly), then xmobar pops up, and will automatically disappear after 2 seconds.
2012-08-22Make it possible to delay Hide, Reveal and Toggle signalsJochen Keil
Previously Hide, Reveal and Toggle were immediate actions. This is the same behaviour as if called now with 0 as parameter. If the parameter is a positive non zero value it is taken as a delay for the requested action. After the delay (implemented using threadDelay) a new signal is sent with zero with no timeout being effective immediately. This is necessary to evaluate the persistency flag after the delay because it might have changed in the meantime. Effectively this means that it is possible to cancel the delayed operation by calling TogglePersistent.
2012-08-22Refactor MVar SignalType to TMVar SignalTypeJochen Keil
Replace MVar with TMVar from the STM package. This is common for ghc now. Since STM is used everywhere else in the src it also adds no additional dependencies. The main reason for this switch is, that readMVar, swapMVar, etc. are only atomically if there is no other producer for this MVar i.e. putMVar. For example readMVar is a combination of putMVar and takeMVar. Due to scheduling and readMVar's non-atomicity it is possible that values written to the MVar appear in the wrong order. Using TMVar fixes this problem, since it allows really atomical read/swap operations.
2012-08-22Allow multiple signals over dbus at onceJochen Keil
It's easy to implement, since arguments to dbus method calls are handed over as list anyway. It also removes the need for safeHead. Bottom line: extra functionality without extra cost.
2012-08-19Doc tweakJose Antonio Ortega Ruiz
2012-08-19Improving the documentation of monitor argsJose Antonio Ortega Ruiz
Following the discussion of pull request #59 in github.
2012-08-19Improving the documentation of monitor argsJose Antonio Ortega Ruiz
Following the discussion of pull request #59 in github.
2012-08-16Update src/Signal.hssoul9
Fix build failure: safeHead is needed even when dbus isn't.
2012-08-16Merging github pull request 57Jose Antonio Ortega Ruiz
Conflicts: readme.md
2012-08-16Documentation bit for 'lowerOnStart' optionJochen Keil
2012-08-16New configuration option 'hideOnStart'Jochen Keil
When set to True the window is initially not mapped, i.e. hidden. It then can be toggled manually (for example using the dbus interface) or automatically (by a plugin) to make it reappear (unhide/reveal).
2012-08-14Bugfix: Replace the TMVar String with a TVar (Maybe String)Jochen Keil
The problem was a race condition which occured when running multiple threads with a small timeout value. Then the TMVar could be left empty. (e.g. hitting a key which causes an operation to write to the pipe very fast) This meant that tryTakeTMVar would return Nothing which would cause all subsequent reset threads to not call cb and keep a stale string on display. By using a Maybe String wrapped in a TVar there is always a valid value available which can be used to restore the display (or not if it's Nothing, but that's desired then and not because another thread was scheduled earlier).
2012-08-13Documentation updatesJose Antonio Ortega Ruiz
2012-08-13LICENSE -> licenseJose Antonio Ortega Ruiz
2012-08-13with_dbus documentedJose Antonio Ortega Ruiz
2012-08-13TypoJose Antonio Ortega Ruiz
2012-08-13Merge for pull request #53Jose Antonio Ortega Ruiz
2012-08-13New goodies by Jochen spelled out in NEWSJose Antonio Ortega Ruiz
2012-08-13Jochen in the list of contributorsJose Antonio Ortega Ruiz
2012-08-13Missing file headers and lintingJose Antonio Ortega Ruiz
2012-08-13Missing import for 'when'Jose Antonio Ortega Ruiz
2012-08-13sh is not linked to bash on all systemsJochen Keil
This is a bash script, so for correctness is needs to be /bin/bash
2012-08-13Add a bit about DBus to documentationJochen Keil
Only one process can export the dbus interface at a time.
2012-08-13Revert lowerOnStart to its original behaviourJochen Keil
I misunderstood the intention of lowerOnStart and changed the implementation to what I thought it would have to do. This was wrong indeed, so back to original behaviour.
2012-08-12Fancier status script sampleJochen Keil
This sample script uses colors and unicode signs for drawing a status bar for e.g. volume. The unicode character can be simply changed to an ascii one in case of problems.
2012-08-12Run the DBus/IPC handler only once on program startJochen Keil
The startCommand function is called for every configured plugin. This results in multiple calls to runIPC. This it not necessary however. startLoop is a much more appropriate place, since the other signal handler (checker and eventer) are run here to.
2012-08-12Catch error when DBus connection failsJochen Keil
connectSession throws a ClientError Exception when DBUS_SESSION_BUS_ADDRESS is unset. Without exception handler this will result in program termination. Since the DBus handler merely sends a signal to the event loop it does no harm when it won't run. Normal operation will continue just if compiled without dbus support.
2012-08-12Add IPC with DBus as optional build dependencyJochen Keil
Not everybody has/wants the DBus library so this can be chosen at compile time.
2012-08-12A bit of documentation re mprisJose Antonio Ortega Ruiz