From 45488d2255ef4dca903468416b2414f062da18ad Mon Sep 17 00:00:00 2001 From: Jose Antonio Ortega Ruiz Date: Tue, 7 Dec 2010 01:23:18 +0100 Subject: README.md back to README --- README | 784 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 784 insertions(+) create mode 100644 README (limited to 'README') diff --git a/README b/README new file mode 100644 index 0000000..cd4f0c1 --- /dev/null +++ b/README @@ -0,0 +1,784 @@ +% xmobar - A Minimalistic Text Based Status Bar +% Andrea Rossato, Jose A. Ortega Ruiz + +About +===== + +xmobar is a minimalistic, text based, status bar. It was originally +designed and implemented by Andrea Rossato to work with [xmonad], +but it's actually window-manager-agnostic. + +xmobar was inspired by the [Ion3] status bar, and supports similar +features, like dynamic color management, output templates, and +extensibility through plugins. + +[This is a screen shot] of Andrea's desktop with [xmonad] and xmobar. + +[xmonad]: http://xmonad.org +[Ion3]: http://tuomov.iki.fi/software/ +[This is a screen shot]: http://haskell.org/sitewiki/images/a/ae/Arossato-config.png + +Installation +============ + +## Using cabal-install + +Xmobar is available from [Hackage], and you can install it using +`cabal-install`: + + cabal install xmobar + +See below for a list of optional compilation flags that will enable +some optional plugins. For instance, to install xmobar with all the +bells and whistles, use: + + cabal install xmobar --flags="all_extensions" + +## From source + +If you don't have `cabal-install` installed, you can get its source +from [Github]: + + git clone git://github.com/jaor/xmobar + +To install simply run: + + tar xvfz xmobar-0.9 + cd xmobar-0.9 + +Then run the configure script: + + runhaskell Setup.lhs configure + + # To enable UTF-8 support run: + runhaskell Setup.lhs configure --flags="with_utf8" + + # To enable both XFT and UTF-8 support run: + runhaskell Setup.lhs configure --flags="with_xft" + +Now you can build the source: + + runhaskell Setup.lhs build + runhaskell Setup.lhs install # possibly to be run as root + + +## Optional features + +You can configure xmobar to include some optional plugins and +features, which are not compiled by default. To that end, you need to +add one or more flags to either the cabal install command or the +configure setup step, as shown in the examples above. + +Extensions need additional libraries (listed below) that will be +automatically downloaded and installed if you're using cabal install. +Otherwise, you'll need to install them yourself. + +`with_utf8` +: UTF-8 support. Requires the [utf8-string] package. + +`with_xft` +: Antialiased fonts. Requires the [X11-xft] package. This option + automatically enables UTF-8. + + To use XFT fonts you need to use the `xft:` prefix in the `font` + configuration option. For instance: + + font = "xft:Times New Roman-10:italic" + +`with_mpd` +: Enables support for the [MPD] daemon. Requires the [libmpd] package. + +`with_inotify` +: Support for inotify in modern linux kernels. This option is needed + for the MBox and Mail plugins to work. + +`with_iwlib` +: Support for wireless cards. Enables the Wireless plugin. No Haskell + library is required, but you will need the [iwlib] C library and + headers in your system (e.g., install `libiw-dev` in Debian-based + systems). + +`all_extensions` +: Enables all the extensions above. + +Running xmobar +============== + +You can now run xmobar with: + + xmobar /path/to/config & + +or + + xmobar & + +if you have the default configuration file saved as `~/.xmobarrc` + +Configuration +============= + +## Quick Start + +See [xmobar.config-sample] for an example. + +For the output template: + +- `%command%` will execute command and print the output. The output + may contain markups to change the characters' color. + +- `string` will print `string` with `#FF0000` color + (red). + +Other configuration options: + +`font` +: Name of the font to be used. Use the `xft:` prefix for XFT fonts. + +`bgColor` +: Background color. + +`fgColor` +: Default font color. + +`position` +: Top, TopW, TopSize, Bottom, BottomW, BottomSize or Static (with x, y, + width and height). + +: TopW and BottomW take 2 arguments: an alignment parameter (L for + left, C for centered, R for Right) and an integer for the + percentage width xmobar window will have in respect to the + screen width. + +: TopSize and BottomSize take 3 arguments: an alignment parameter, an + integer for the percentage width, and an integer for the minimum pixel + height that the xmobar window will have. + +: For example: + +: position = BottomW C 75 + +: to place xmobar at the bottom, centered with the 75% of the screen width. + +: Or + +: position = Static { xpos = 0 , ypos = 0, width = 1024, height = 15 } + +: or + +: position = Top + +`border` +: TopB, TopBM, BottomB, BottomBM, FullB, FullBM or NoBorder (default). + +: TopB, BottomB, FullB take no arguments, and request drawing a + border at the top, bottom or around xmobar's window, + respectively. + +: TopBM, BottomBM, FullBM take an integer argument, which is the + margin, in pixels, between the border of the window and the + drawn border. + +`borderColor` +: Border color. + +`commands` +: For setting the options of the programs to run (optional). + +`sepChar` +: The character to be used for indicating commands in the output + template (default '%'). + +`alignSep` +: a 2 character string for aligning text in the output template. The + text before the first character will be align to left, the text in + between the 2 characters will be centered, and the text after the + second character will be align to the right. + +`template` +: The output template. + +## Running xmobar with i3status + +xmobar can be used to display information gathered by [i3status], a +small program that gathers information and formats it suitable for +being displayed by the dzen2 status bar, wmii's status bar or xmobar's +StdinReader. + +Since xmobar support has been added only recently you need to get the +git repository, and build it with the appropriate flags: + + git clone git://code.stapelberg.de/i3status + +and then build it: + + cd i3status + make EXTRA_CFLAGS="-DXMOBAR + +Then you can run it with: + + ./i3status -c i3status.conf | xmobar -o -t "%StdinReader%" -c "[Run StdinReader]" + +## Command Line Options + +xmobar can be either configured with a configuration file or with +command line options. In the second case, the command line options +will overwrite the corresponding options set in the configuration +file. + +Example: + + xmobar -B white -a right -F blue -t '%LIPB%' -c '[Run Weather "LIPB" [] 36000]' + +This is the list of command line options (the output of +xmobar --help): + + Usage: xmobar [OPTION...] [FILE] + Options: + -h, -? --help This help + -V --version Show version information + -f font name --font=font name The font name + -B bg color --bgcolor=bg color The background color. Default black + -F fg color --fgcolor=fg color The foreground color. Default grey + -o --top Place xmobar at the top of the screen + -b --bottom Place xmobar at the bottom of the screen + -a alignsep --alignsep=alignsep Separators for left, center and right text + alignment. Default: '}{' + -s char --sepchar=char The character used to separate commands in + the output template. Default '%' + -t template --template=template The output template + -c commands --commands=commands The list of commands to be executed + -x screen --screen=screen On which X screen number to start + Mail bug reports and suggestions to + +## The Output Template + +The output template must contain at least one command. xmobar will +parse the template and will search for the command to be executed in +the `commands` configuration option. First an `alias` will be searched +(plugins such as Weather or Network have default aliases, see below). +After that, the command name will be tried. If a command is found, the +arguments specified in the `commands` list will be used. + +If no command is found in the `commands` list, xmobar will ask the +operating system to execute a program with the name found in the +template. If the execution is not successful an error will be +reported. + +## The `commands` Configuration Option + +The `commands` configuration option is a list of commands information +and arguments to be used by xmobar when parsing the output template. +Each member of the list consists in a command prefixed by the `Run` +keyword. Each command has arguments to control the way xmobar is going +to execute it. + +The option consists in a list of commands separated by a comma and +enclosed by square parenthesis. + +Example: + + [Run Memory ["-t","Mem: %"] 10, Run Swap [] 10] + +to run the Memory monitor plugin with the specified template, and the +swap monitor plugin, with default options, every second. + +The only internal available command is `Com` (see below Executing +External Commands). All other commands are provided by plugins. +xmobar comes with some plugins, providing a set of system monitors, +a standard input reader, an Unix named pipe reader, and a configurable +date plugin. These plugins install the following internal commands: +`Weather`, `Network`, `Memory`, `Swap`, `Cpu`, `MultiCpu`, `Battery`, +`Thermal`, `CpuFreq`, `CoreTemp`, `Date`, `StdinReader`, +`CommandReader`, and `PipeReader`. + +To remove them see below Installing/Removing a Plugin + +Other commands can be created as plugins with the Plugin +infrastructure. See below Writing a Plugin + +## System Monitor Plugins + +This is the description of the system monitor plugins that are +installed by default. + +Each monitor has an `alias` to be used in the output template. +Monitors have default aliases. + +`Weather StationID Args RefreshRate` + +- aliases to the Station ID: so `Weather "LIPB" []` can be used in template as `%LIPB%` +- Args: the argument list (see below) +- Variables that can be used with the `-t`/`--template` argument: + `station`, `stationState`, `year`, `month`, `day`, `hour`, + `wind`, `visibility`, `skyCondition`, `tempC`, `tempF`, + `dewPoint`, `rh`, `pressure` +- Default template: `: C, rh % ()` +- Requires `curl` in the `$PATH` to retrieve weather information from + `http://weather.noaa.gov` + +`Network Interface Args RefreshRate` + +- aliases to the interface name: so `Network "eth0" []` can be used as `%eth0%` +- Args: the argument list (see below) +- Variables that can be used with the `-t`/`--template` argument: + `dev`, `rx`, `tx`, `rxbar`, `txbar` +- Default template: `: |` + +`Wireless Interface Args RefreshRate` + +- aliases to the interface name with the suffix "wi": thus, `Wirelss + "wlan0" []` can be used as `%wlan0wi%` +- Args: the argument list (see below) +- Variables that can be used with the `-t`/`--template` argument: + `essid`, `quality`, `qualitybar` +- Default template: ` ` +- Requires the C library libiw (part of the wireless tools suite) + installed in your system. In addition, to activate this plugin you + must pass --flags="with_iwlib" to "runhaskell Setup configure" + or to "cabal install". + +`Memory Args RefreshRate` + +- aliases to `memory` +- Args: the argument list (see below) +- Variables that can be used with the `-t`/`--template` argument: + `total`, `free`, `buffer`, `cache`, `rest`, `used`, + `usedratio`, `usedbar`, `freebar` +- Default template: `Mem: % (M)` + +`Swap Args RefreshRate` + +- aliases to `swap` +- Args: the argument list (see below) +- Variables that can be used with the `-t`/`--template` argument: + `total`, `used`, `free`, `usedratio` +- Default template: `Swap: %` + +`Cpu Args RefreshRate` + +- aliases to `cpu` +- Args: the argument list (see below) +- Variables that can be used with the `-t`/`--template` argument: + `total`, `bar`, `user`, `nice`, `system`, `idle` +- Default template: `Cpu: ` + +`MultiCpu Args RefreshRate` + +- aliases to `multicpu` +- Args: the argument list (see below) +- Variables that can be used with the `-t`/`--template` argument: + `total`, `bar`, `user`, `nice`, `system`, `idle`, + `total0`, `bar0`, `user0`, `nice0`, `system0`, `idle0`, ... +- Default template: `Cpu: ` + +`Battery Args RefreshRate` + +- aliases to `battery` +- Args: the argument list (see below) +- Variables that can be used with the `-t`/`--template` argument: + `left`, `leftbar`, `status` +- Default template: `Batt: ` + +`BatteryP Dirs Args RefreshRate` + +- aliases to `battery` +- Dirs: list of directories in /proc/acpi/battery/ directory where to + look for the `state` and `info` files. Example: + `["BAT0","BAT1","BAT2"]`. Only the first 3 directories will be + searched. +- Args: the argument list (see below) +- Variables that can be used with the `-t`/`--template` argument: + `left`, `leftbar`, `status` +- Default template: `Batt: ` + +`TopProc Args RefreshRate` + +- aliases to `top` +- Args: the argument list (see below) +- Variables that can be used with the `-t`/`--template` argument: + `no`, `name1`, `cpu1`, `both1`, `mname1`, `mem1`, `mboth1`, + `name2`, `cpu2`, `both2`, `mname2`, `mem2`, `mboth2`, ... +- Default template: `` +- Displays the name and cpu/mem usage of running processes (`bothn` + and `mboth` display both, and is useful to specify an overall + maximum and/or minimum width, using the `-m`/`-M` arguments. `no` gives + the total number of processes. + +`TopMem Args RefreshRate` + +- aliases to `topmem` +- Args: the argument list (see below) +- Variables that can be used with the `-t`/`--template` argument: + `name1`, `mem1`, `both1`, `name2`, `mem2`, `both2`, ... +- Default template: `` +- Displays the name and RSS (resident memory size) of running + processes (`bothn` displays both, and is useful to specify an + overall maximum and/or minimum width, using the `-m`/`-M` arguments. + +`DiskU Disks Args RefreshRate` + +- aliases to `disku` +- Disks: list of pairs of the form (device or mount point, template), + where the template can contain , , , or + , or for total, free, used, free + percentage and used percentage of the given file system capacity. Example: + `[("/", "/"), ("sdb1", "")]` +- Args: the argument list (see above). `-t`/`--template` is ignored. +- Default template: none (you must specify a template for each file system). + +`DiskIO Disks Args RefreshRate` + +- aliases to `diskio` +- Disks: list of pairs of the form (device or mount point, template), + where the template can contain , , for total, + read and write speed, respectively. Example: + `[("/", " "), ("sdb1", "")]` +- Args: the argument list (see above). `-t`/`--template` is ignored. +- Default template: none (you must specify a template for each file system). + +`Thermal Zone Args RefreshRate` + +- aliases to the Zone: so `Zone "THRM" []` can be used in template as `%THRM%` +- Args: the argument list (see below) +- Variables that can be used with the `-t`/`--template` argument: + `temp` +- Default template: `Thm: C` +- This plugin works only on sytems with devices having thermal zone. + Check directories in /proc/acpi/thermal_zone for possible values. +- Example: `Run Thermal "THRM" ["-t","iwl4965-temp: C"]` + +`CpuFreq Args RefreshRate` + +- aliases to `cpufreq` +- Args: the argument list (see below) +- Variables that can be used with the `-t`/`--template` argument: + `cpu0`, `cpu1`, .., `cpuN` +- Default template: `Freq: GHz` +- This monitor requires acpi_cpufreq module to be loaded in kernel +- Example: `Run CpuFreq ["-t","Freq:|GHz","-L","0","-H","2","-l","lightblue","-n","white","-h","red"] 50` + +`CoreTemp Args RefreshRate` + +- aliases to `coretemp` +- Args: the argument list (see below) +- Variables that can be used with the `-t`/`--template` argument: + `core0`, `core1`, .., `coreN` +- Default template: `Temp: C` +- This monitor requires coretemp module to be loaded in kernel +- Example: `Run CoreTemp ["-t","Temp:|C","-L","40","-H","60","-l","lightblue","-n","gray90","-h","red"] 50` + +`MPD Args RefreshRate` + +- aliases to `mpd` +- Args: the argument list (see below). In addition you can provide + `-P`, `-S` and `-Z`, with an string argument, to represent the + playing, stopped and paused states in the `statei` template field, + and `-h`, `-p` and `-x` for the host, port and password (default + host is "localhost", port 6600 and empty password). +- Variables that can be used with the `-t`/`--template` argument: + `bar`, `state`, `statei`, `volume`, `length` + `lapsed`, `remaining`, + `plength` (playlist length), `ppos` (playlist position) + `name`, `artist`, `composer`, `performer` + `album`, `title`, `track`, `file`, `genre` +- Default template: `MPD: ` +- Example: + `Run MPD ["-t", + " (<album>) <track>/<plength> <statei> ", + "--", "-P", ">>", "-Z", "|", "-S", "><"] 10` + Note that you need "--" to separate regular monitor options from + MPD's specific ones. +- This monitor will only be compiled if you ask for it using the + `with_mpd` flag. It needs libmpd 4.1 or later (available on Hackage). + +`Mail Args` + +- aliases to `Mail` +- Args: list of maildirs in form [("name1","path1"),("name2","path2")] +- This plugin requires INOTIFY support in Linux kernel and hinotify library. + To activate, pass --flags="with_inotify" to "runhaskell Setup configure" + or to "cabal install". + +`MBox Mboxes Opts Alias` + +- Mboxes a list of mbox files of the form [("name", "path", "color")], + where name is the displayed name, path the absolute or relative (to + BaseDir) path of the mbox file, and color the color to use to display + the mail count (use an empty string for the default). +- Opts is a possibly empty list of options, as flags. Possible values: + -a --all (no arg) Show all mailboxes, even if empty. + -d dir --dir dir a string giving the base directory where mbox files with + a relative path live. + -p prefix --prefix prefix a string giving a prefix for the list + of displayed mail coints + -s suffix --suffix suffix a string giving a suffix for the list + of displayed mail coints +- This plugin requires INOTIFY support in Linux kernel and hinotify library. + To activate, pass --flags="with_inotify" to "runhaskell Setup + configure" or to "cabal install". +- Example: + `Run MBox [("I ", "inbox", "red"), ("O ", "/foo/mbox", "")] + ["-d", "/var/mail/", "-p", " "] "mbox"` + will look for mails in `/var/mail/inbox` and `/foo/mbox`, and will put + a space in front of the printed string (when it's not empty); it + can be used in the template with the alias `mbox`. + +## Monitor Plugins Commands Arguments + +These are the arguments that can be used for internal commands in the +`commands` configuration option: + + -H number --High=number The high threshold + -L number --Low=number The low threshold + -h color number --high=color number Color for the high threshold: es "#FF0000" + -n color number --normal=color number Color for the normal threshold: es "#00FF00" + -l color number --low=color number Color for the low threshold: es "#0000FF" + -p number --ppad=number Pad percentages to given width + -m number --minwidth=number Minimum field width + -M number --maxwidth=number Maximum field width + -w number --width=number Fixed field width + -c chars --padchars=chars Chars used (cyclically) for padding + -a ["r" or "l"] --align=["r" or "l"] Pad alignment (right/left) + -b chars --bback=chars Chars used to draw bar backgrounds (default ":") + -f chars --bfore=chars Chars used to draw bar foregrounds (default "#") + -W number --bwidth=number Bar width (default 10) + -t output template --template=output template Output template of the command. + +Commands' arguments must be set as a list. E.g.: + + Run Weather "EGPF" ["-t","<station>: <tempC>C"] 36000 + +In this case xmobar will run the weather monitor, getting information +for the weather station ID EGPF (Glasgow Airport, as a homage to GHC) +every hour (36000 tenth of seconds), with a template that will output +something like: + + Glasgow Airport: 16.0C + +## Executing External Commands + +In order to execute an external command you can either write the +command name in the template, in this case it will be executed without +arguments, or you can configure it in the "commands" configuration +option list with the Com template command: + +`Com ProgramName Args Alias RefreshRate` + +- ProgramName: the name of the program +- Args: the arguments to be passed to the program at execution time +- Alias: a name to be used in the template. If the alias is en empty + string the program name can be used in the template. + +Es: + + Run Com "uname" ["-s","-r"] "" 36000 + +can be used in the output template as `%uname%` + + Run Com "date" ["+\"%a %b %_d %H:%M\""] "mydate" 600 + +can be used in the output template as `%mydate%` + +## Other Plugins + +`Date Args Alias RefreshRate` + +`StdinReader` + +`CommandReader "/path/to/program" Alias` + +`PipeReader "/path/to/pipe" Alias` + +Plugins +======= + +## Writing a Plugin + +Writing a plugin for xmobar should be very simple. You need to create +a data type with at least one constructor. + +Next you must declare this data type an instance of the `Exec` class, by +defining the 1 needed method (alternatively `start` or `run`) and 2 +optional ones (alias and rate): + + start :: e -> (String -> IO ()) -> IO () + run :: e -> IO String + rate :: e -> Int + alias :: e -> String + +`start` must receive a callback to be used to display the `String` +produced by the plugin. This method can be used for plugins that need +to perform asynchronous actions. See `Plugins/PipeReader.hs` for an +example. + +`run` can be used for simpler plugins. If you define only `run` the +plugin will be run every second. To overwrite this default you just +need to implement `rate`, which must return the number of tenth of +seconds between every successive runs. See `Plugins/HelloWorld.hs` for +an example of a plugin that runs just once, and `Plugins/Date.hs` for +one that implements `rate`. + +Notice that Date could be implemented as: + + instance Exec Date where + alias (Date _ a _) = a + start (Date f _ r) = date f r + + date :: String -> Int -> (String -> IO ()) -> IO () + date format r callback = do go + where go = do + t <- toCalendarTime =<< getClockTime + callback $ formatCalendarTime defaultTimeLocale format t + tenthSeconds r >> go + +This implementation is equivalent to the one you can read in +`Plugins/Date.hs`. + +`alias` is the name to be used in the output template. Default alias +will be the data type constructor. + +Implementing a plugin requires importing the plugin API (the `Exec` +class definition), that is exported by `Plugins.hs`. So you just need +to import it in your module with: + + import Plugins + +After that your type constructor can be used as an argument for the +Runnable type constructor `Run` in the `commands` list of the +configuration options. + +This requires importing your plugin into `Config.hs` and adding your +type to the type list in the type signature of `Config.runnableTypes`. + +For a very basic example see `Plugins/HelloWorld.hs` or the other +plugins that are distributed with xmobar. + +## Installing/Removing a Plugin + +Installing a plugin should require 3 steps. Here we are going to +install the HelloWorld plugin that comes with xmobar: + +1. import the plugin module in `Config.hs`, by adding: + + import Plugins.HelloWorld + +2. add the plugin data type to the list of data types in the type + signature of `runnableTypes` in `Config.hs`. For instance, for the + HelloWorld plugin, change `runnableTypes` into: + + runnableTypes :: Command :*: Monitors :*: HelloWorld :*: () + runnableTypes = undefined + +3. Rebuild and reinstall xmobar. Now test it with: + + xmobar Plugins/helloworld.config + +As you may see in the example configuration file, the plugin can be +used by adding, in the `commands` list: + + Run HelloWorld + +and, in the output template, the alias of the plugin: + + %helloWorld% + +That's it. + +To remove a plugin, just remove its type from the type signature of +runnableTypes and remove the imported modules. + +To remove the system monitor plugin: + +1. remove, from `Config.hs`, the line + + import Plugins.Monitors + +2. in `Config.hs` change + + runnableTypes :: Command :*: Monitors :*: () + runnableTypes = undefined + + to + + runnableTypes :: Command :*: () + runnableTypes = undefined + +3. rebuild xmobar. + +Bug Reports +=========== + +To submit bug reports you can use the [bug tracker over at Google +code] or send mail to our [Mailing list]. + +[bug tracker over at Google code]: http://code.google.com/p/xmobar/issues + +Credits +======= + +__Andrea Rossato__: + +Thanks to Robert Manea and Spencer Janssen for their help in +understanding how X works. They gave me suggestions on how to solve +many problems with xmobar. + +Thanks to Claus Reinke for make me understand existential types (or at +least for letting me think I grasp existential types...;-). + +xmobar incorporates patches from: Krzysztof Kosciuszkiewicz, Spencer +Janssen, Jens Petersen, Dmitry Kurochkin, Lennart Kolmodin, and +Norbert Zeh. + +__jao__: + +Thanks to Andrea for creating xmobar in the first place, and for +giving the chance to contribute. + +Useful links +============ + +- [Github page]. +- [Mailing list]. +- Andrea's original [xmobar] home page, and [xmobar darcs repository]. + +- To understand the internal mysteries of xmobar you may try reading + [this tutorial] on X Window Programming in Haskell. + +- My [sawflibs] project includes a module to automate running xmobar + in [sawfish]. + +[xmobar]: http://code.haskell.org/~arossato/xmobar/ +[xmobar darcs repository]: http://code.haskell.org/xmobar +[this tutorial]: http://www.haskell.org/haskellwiki/X_window_programming_in_Haskell +[sawflibs]: http://github.com/jaor/sawflibs +[sawfish]: http://sawfish.wikia.com/ + +Author +====== + +Andrea Rossato originally designed and implemented xmobar up to +version 0.11.1. Since then, it is maintained by [Jose Antonio Ortega +Ruiz](http://hacks-galore.org/jao/). + +Legal +===== + +This software is released under a BSD-style license. See [LICENSE] for +more details. + +Copyright © 2007-2010 Andrea Rossato + +Copyright © 2010 Jose Antonio Ortega Ruiz + +[Github]: http://github.com/jaor/xmobar/ +[Github page]: http://github.com/jaor/xmobar +[Hackage]: http://hackage.haskell.org/package/xmobar/ +[LICENSE]: https://github.com/jaor/xmobar/raw/master/LICENSE +[Mailing list]: http://projects.haskell.org/cgi-bin/mailman/listinfo/xmobar +[MPD]: http://mpd.wikia.com/ +[X11-xft]: http://hackage.haskell.org/package/X11-xft/ +[i3status]: http://i3.zekjur.net/i3status/ +[iwlib]: http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html +[libmpd]: http://hackage.haskell.org/package/libmpd/ +[utf8-string]: http://hackage.haskell.org/package/utf8-string/ +[xmobar.config-sample]: http://github.com/jaor/xmobar/raw/master/xmobar.config-sample -- cgit v1.2.3