From d8e17b6f7ccf0675a37f1b1e021da125468fcbe2 Mon Sep 17 00:00:00 2001 From: Jose Antonio Ortega Ruiz Date: Tue, 7 Dec 2010 01:09:58 +0100 Subject: README updated --- README | 748 ----------------------------------------------------------------- 1 file changed, 748 deletions(-) delete mode 100644 README (limited to 'README') diff --git a/README b/README deleted file mode 100644 index 6a527f5..0000000 --- a/README +++ /dev/null @@ -1,748 +0,0 @@ -% xmobar - A Minimalistic Text Based Status Bar -% Andrea Rossato - -About -===== - -[xmobar] is a minimalistic, text based, status bar. It was designed to -work with the [xmonad] Window Manager. - -It was inspired by the [Ion3] status bar, and supports similar features, -like dynamic color management, output templates, and extensibility -through plugins. - -[This is a screen shot] of my desktop with [xmonad] and [xmobar]. - -[xmobar] supports XFT and UTF-8 locales. - -See `xmobar.config-sample`, distributed with the source code, for a -sample configuration. - -Download -======== - -You can get the [xmobar] source code from [Hackage]. - -To get the darcs source run: - - darcs get http://code.haskell.org/xmobar/ - -The latest binary can be found here: - - - -A recent screen shot can be found here: - - - -Version 0.9 requires Cabal-1.2.x, but should work both with ghc-6.6.1 -and ghc-6.8.1. - -Bug Reports -=========== - -To submit bug reports you can use the Google code bug tracking system -available at the following address: - - - - -Installation -============ - -To install simply run: - - tar xvfz xmobar-0.9 - cd xmobar-0.9 - -Then run the configure script: - - runhaskell Setup.lhs configure - - # To enable UTF-8 support run: - runhaskell Setup.lhs configure --flags="with_utf8" - - # To enable both XFT and UTF-8 support run: - runhaskell Setup.lhs configure --flags="with_xft" - -Now you can build the source: - - runhaskell Setup.lhs build - runhaskell Setup.lhs install # possibly to be run as root - -You can now run [xmobar] with: - - xmobar /path/to/config & - -or - - xmobar & - -if you have the default configuration file saved as `~/.xmobarrc` - -Utf-8 and Xft Support -===================== - -[xmobar] can be compiled with UTF-8 and XFT support. If you want UTF-8 -support only, you just need to run the configuration script with the -`"with_utf"` flag: - - runhaskell Setup.lhs configure --flags="with_utf8" - -This requires the presence of [utf8-string] package. - -XFT support, which will also enable UTF-8 support, requires the -[X11-xft] package too and is enabled by running the configuration -script with the `"with_xft"` flag: - - runhaskell Setup.lhs configure --flags="with_xft" - -Then build [xmobar] as usual. - -To use XFT fonts you need to use the `xft:` prefix in the `font` -configuration option. For instance: - - font = "xft:Times New Roman-10:italic" - -Configuration -============= - -## Quick Start - -See `xmobar.config-sample` for an example. - -For the output template: - -- `%command%` will execute command and print the output. The output - may contain markups to change the characters' color. - -- `string` will print `string` with `#FF0000` color - (red). - -Other configuration options: - -`font` -: Name of the font to be used. Use the `xft:` prefix for XFT fonts. - -`bgColor` -: Background color. - -`fgColor` -: Default font color. - -`position` -: Top, TopW, TopSize, Bottom, BottomW, BottomSize or Static (with x, y, - width and height). - -: TopW and BottomW take 2 arguments: an alignment parameter (L for - left, C for centered, R for Right) and an integer for the - percentage width xmobar window will have in respect to the - screen width. - -: TopSize and BottomSize take 3 arguments: an alignment parameter, an - integer for the percentage width, and an integer for the minimum pixel - height that the xmobar window will have. - -: For example: - -: position = BottomW C 75 - -: to place xmobar at the bottom, centered with the 75% of the screen width. - -: Or - -: position = Static { xpos = 0 , ypos = 0, width = 1024, height = 15 } - -: or - -: position = Top - -`border` -: TopB, TopBM, BottomB, BottomBM, FullB, FullBM or NoBorder (default). - -: TopB, BottomB, FullB take no arguments, and request drawing a - border at the top, bottom or around xmobar's window, - respectively. - -: TopBM, BottomBM, FullBM take an integer argument, which is the - margin, in pixels, between the border of the window and the - drawn border. - -`borderColor` -: Border color. - -`commands` -: For setting the options of the programs to run (optional). - -`sepChar` -: The character to be used for indicating commands in the output - template (default '%'). - -`alignSep` -: a 2 character string for aligning text in the output template. The - text before the first character will be align to left, the text in - between the 2 characters will be centered, and the text after the - second character will be align to the right. - -`template` -: The output template. - -## Running xmobar with i3status - -[xmobar] can be used to display information gathered by [i3status], a -small program that gathers information and formats it suitable for -being displayed by the dzen2 status bar, wmii's status bar or xmobar's -StdinReader. - -Since xmobar support has been added only recently you need to get the -git repository, and build it with the appropriate flags: - - git clone git://code.stapelberg.de/i3status - -and then build it: - - cd i3status - make EXTRA_CFLAGS="-DXMOBAR - -Then you can run it with: - - ./i3status -c i3status.conf | xmobar -o -t "%StdinReader%" -c "[Run StdinReader]" - -## Command Line Options - -[xmobar] can be either configured with a configuration file or with -command line options. In the second case, the command line options -will overwrite the corresponding options set in the configuration -file. - -Example: - - xmobar -B white -a right -F blue -t '%LIPB%' -c '[Run Weather "LIPB" [] 36000]' - -This is the list of command line options (the output of -xmobar --help): - - Usage: xmobar [OPTION...] [FILE] - Options: - -h, -? --help This help - -V --version Show version information - -f font name --font=font name The font name - -B bg color --bgcolor=bg color The background color. Default black - -F fg color --fgcolor=fg color The foreground color. Default grey - -o --top Place xmobar at the top of the screen - -b --bottom Place xmobar at the bottom of the screen - -a alignsep --alignsep=alignsep Separators for left, center and right text - alignment. Default: '}{' - -s char --sepchar=char The character used to separate commands in - the output template. Default '%' - -t template --template=template The output template - -c commands --commands=commands The list of commands to be executed - -x screen --screen=screen On which X screen number to start - Mail bug reports and suggestions to - -## The Output Template - -The output template must contain at least one command. [xmobar] will -parse the template and will search for the command to be executed in -the `commands` configuration option. First an `alias` will be searched -(plugins such as Weather or Network have default aliases, see below). -After that, the command name will be tried. If a command is found, the -arguments specified in the `commands` list will be used. - -If no command is found in the `commands` list, [xmobar] will ask the -operating system to execute a program with the name found in the -template. If the execution is not successful an error will be -reported. - -## The `commands` Configuration Option - -The `commands` configuration option is a list of commands information -and arguments to be used by [xmobar] when parsing the output template. -Each member of the list consists in a command prefixed by the `Run` -keyword. Each command has arguments to control the way [xmobar] is going -to execute it. - -The option consists in a list of commands separated by a comma and -enclosed by square parenthesis. - -Example: - - [Run Memory ["-t","Mem: %"] 10, Run Swap [] 10] - -to run the Memory monitor plugin with the specified template, and the -swap monitor plugin, with default options, every second. - -The only internal available command is `Com` (see below Executing -External Commands). All other commands are provided by plugins. -[xmobar] comes with some plugins, providing a set of system monitors, -a standard input reader, an Unix named pipe reader, and a configurable -date plugin. These plugins install the following internal commands: -`Weather`, `Network`, `Memory`, `Swap`, `Cpu`, `MultiCpu`, `Battery`, -`Thermal`, `CpuFreq`, `CoreTemp`, `Date`, `StdinReader`, -`CommandReader`, and `PipeReader`. - -To remove them see below Installing/Removing a Plugin - -Other commands can be created as plugins with the Plugin -infrastructure. See below Writing a Plugin - -## System Monitor Plugins - -This is the description of the system monitor plugins that are -installed by default. - -Each monitor has an `alias` to be used in the output template. -Monitors have default aliases. - -`Weather StationID Args RefreshRate` - -- aliases to the Station ID: so `Weather "LIPB" []` can be used in template as `%LIPB%` -- Args: the argument list (see below) -- Variables that can be used with the `-t`/`--template` argument: - `station`, `stationState`, `year`, `month`, `day`, `hour`, - `wind`, `visibility`, `skyCondition`, `tempC`, `tempF`, - `dewPoint`, `rh`, `pressure` -- Default template: `: C, rh % ()` -- Requires `curl` in the `$PATH` to retrieve weather information from - `http://weather.noaa.gov` - -`Network Interface Args RefreshRate` - -- aliases to the interface name: so `Network "eth0" []` can be used as `%eth0%` -- Args: the argument list (see below) -- Variables that can be used with the `-t`/`--template` argument: - `dev`, `rx`, `tx`, `rxbar`, `txbar` -- Default template: `: |` - -`Wireless Interface Args RefreshRate` - -- aliases to the interface name with the suffix "wi": thus, `Wirelss - "wlan0" []` can be used as `%wlan0wi%` -- Args: the argument list (see below) -- Variables that can be used with the `-t`/`--template` argument: - `essid`, `quality`, `qualitybar` -- Default template: ` ` -- Requires the C library libiw (part of the wireless tools suite) - installed in your system. In addition, to activate this plugin you - must pass --flags="with_iwlib" to "runhaskell Setup configure" - or to "cabal install". - -`Memory Args RefreshRate` - -- aliases to `memory` -- Args: the argument list (see below) -- Variables that can be used with the `-t`/`--template` argument: - `total`, `free`, `buffer`, `cache`, `rest`, `used`, - `usedratio`, `usedbar`, `freebar` -- Default template: `Mem: % (M)` - -`Swap Args RefreshRate` - -- aliases to `swap` -- Args: the argument list (see below) -- Variables that can be used with the `-t`/`--template` argument: - `total`, `used`, `free`, `usedratio` -- Default template: `Swap: %` - -`Cpu Args RefreshRate` - -- aliases to `cpu` -- Args: the argument list (see below) -- Variables that can be used with the `-t`/`--template` argument: - `total`, `bar`, `user`, `nice`, `system`, `idle` -- Default template: `Cpu: ` - -`MultiCpu Args RefreshRate` - -- aliases to `multicpu` -- Args: the argument list (see below) -- Variables that can be used with the `-t`/`--template` argument: - `total`, `bar`, `user`, `nice`, `system`, `idle`, - `total0`, `bar0`, `user0`, `nice0`, `system0`, `idle0`, ... -- Default template: `Cpu: ` - -`Battery Args RefreshRate` - -- aliases to `battery` -- Args: the argument list (see below) -- Variables that can be used with the `-t`/`--template` argument: - `left`, `leftbar`, `status` -- Default template: `Batt: ` - -`BatteryP Dirs Args RefreshRate` - -- aliases to `battery` -- Dirs: list of directories in /proc/acpi/battery/ directory where to - look for the `state` and `info` files. Example: - `["BAT0","BAT1","BAT2"]`. Only the first 3 directories will be - searched. -- Args: the argument list (see below) -- Variables that can be used with the `-t`/`--template` argument: - `left`, `leftbar`, `status` -- Default template: `Batt: ` - -`TopProc Args RefreshRate` - -- aliases to `top` -- Args: the argument list (see below) -- Variables that can be used with the `-t`/`--template` argument: - `no`, `name1`, `cpu1`, `both1`, `mname1`, `mem1`, `mboth1`, - `name2`, `cpu2`, `both2`, `mname2`, `mem2`, `mboth2`, ... -- Default template: `` -- Displays the name and cpu/mem usage of running processes (`bothn` - and `mboth` display both, and is useful to specify an overall - maximum and/or minimum width, using the `-m`/`-M` arguments. `no` gives - the total number of processes. - -`TopMem Args RefreshRate` - -- aliases to `topmem` -- Args: the argument list (see below) -- Variables that can be used with the `-t`/`--template` argument: - `name1`, `mem1`, `both1`, `name2`, `mem2`, `both2`, ... -- Default template: `` -- Displays the name and RSS (resident memory size) of running - processes (`bothn` displays both, and is useful to specify an - overall maximum and/or minimum width, using the `-m`/`-M` arguments. - -`DiskU Disks Args RefreshRate` - -- aliases to `disku` -- Disks: list of pairs of the form (device or mount point, template), - where the template can contain , , , or - , or for total, free, used, free - percentage and used percentage of the given file system capacity. Example: - `[("/", "/"), ("sdb1", "")]` -- Args: the argument list (see above). `-t`/`--template` is ignored. -- Default template: none (you must specify a template for each file system). - -`DiskIO Disks Args RefreshRate` - -- aliases to `diskio` -- Disks: list of pairs of the form (device or mount point, template), - where the template can contain , , for total, - read and write speed, respectively. Example: - `[("/", " "), ("sdb1", "")]` -- Args: the argument list (see above). `-t`/`--template` is ignored. -- Default template: none (you must specify a template for each file system). - -`Thermal Zone Args RefreshRate` - -- aliases to the Zone: so `Zone "THRM" []` can be used in template as `%THRM%` -- Args: the argument list (see below) -- Variables that can be used with the `-t`/`--template` argument: - `temp` -- Default template: `Thm: C` -- This plugin works only on sytems with devices having thermal zone. - Check directories in /proc/acpi/thermal_zone for possible values. -- Example: `Run Thermal "THRM" ["-t","iwl4965-temp: C"]` - -`CpuFreq Args RefreshRate` - -- aliases to `cpufreq` -- Args: the argument list (see below) -- Variables that can be used with the `-t`/`--template` argument: - `cpu0`, `cpu1`, .., `cpuN` -- Default template: `Freq: GHz` -- This monitor requires acpi_cpufreq module to be loaded in kernel -- Example: `Run CpuFreq ["-t","Freq:|GHz","-L","0","-H","2","-l","lightblue","-n","white","-h","red"] 50` - -`CoreTemp Args RefreshRate` - -- aliases to `coretemp` -- Args: the argument list (see below) -- Variables that can be used with the `-t`/`--template` argument: - `core0`, `core1`, .., `coreN` -- Default template: `Temp: C` -- This monitor requires coretemp module to be loaded in kernel -- Example: `Run CoreTemp ["-t","Temp:|C","-L","40","-H","60","-l","lightblue","-n","gray90","-h","red"] 50` - -`MPD Args RefreshRate` - -- aliases to `mpd` -- Args: the argument list (see below). In addition you can provide - `-P`, `-S` and `-Z`, with an string argument, to represent the - playing, stopped and paused states in the `statei` template field, - and `-h`, `-p` and `-x` for the host, port and password (default - host is "localhost", port 6600 and empty password). -- Variables that can be used with the `-t`/`--template` argument: - `bar`, `state`, `statei`, `volume`, `length` - `lapsed`, `remaining`, - `plength` (playlist length), `ppos` (playlist position) - `name`, `artist`, `composer`, `performer` - `album`, `title`, `track`, `file`, `genre` -- Default template: `MPD: ` -- Example: - `Run MPD ["-t", - " (<album>) <track>/<plength> <statei> ", - "--", "-P", ">>", "-Z", "|", "-S", "><"] 10` - Note that you need "--" to separate regular monitor options from - MPD's specific ones. -- This monitor will only be compiled if you ask for it using the - `with_mpd` flag. It needs libmpd 4.1 or later (available on Hackage). - -`Mail Args` - -- aliases to `Mail` -- Args: list of maildirs in form [("name1","path1"),("name2","path2")] -- This plugin requires INOTIFY support in Linux kernel and hinotify library. - To activate, pass --flags="with_inotify" to "runhaskell Setup configure" - or to "cabal install". - -`MBox Mboxes Opts Alias` - -- Mboxes a list of mbox files of the form [("name", "path", "color")], - where name is the displayed name, path the absolute or relative (to - BaseDir) path of the mbox file, and color the color to use to display - the mail count (use an empty string for the default). -- Opts is a possibly empty list of options, as flags. Possible values: - -a --all (no arg) Show all mailboxes, even if empty. - -d dir --dir dir a string giving the base directory where mbox files with - a relative path live. - -p prefix --prefix prefix a string giving a prefix for the list - of displayed mail coints - -s suffix --suffix suffix a string giving a suffix for the list - of displayed mail coints -- This plugin requires INOTIFY support in Linux kernel and hinotify library. - To activate, pass --flags="with_inotify" to "runhaskell Setup - configure" or to "cabal install". -- Example: - `Run MBox [("I ", "inbox", "red"), ("O ", "/foo/mbox", "")] - ["-d", "/var/mail/", "-p", " "] "mbox"` - will look for mails in `/var/mail/inbox` and `/foo/mbox`, and will put - a space in front of the printed string (when it's not empty); it - can be used in the template with the alias `mbox`. - -## Monitor Plugins Commands Arguments - -These are the arguments that can be used for internal commands in the -`commands` configuration option: - - -H number --High=number The high threshold - -L number --Low=number The low threshold - -h color number --high=color number Color for the high threshold: es "#FF0000" - -n color number --normal=color number Color for the normal threshold: es "#00FF00" - -l color number --low=color number Color for the low threshold: es "#0000FF" - -p number --ppad=number Pad percentages to given width - -m number --minwidth=number Minimum field width - -M number --maxwidth=number Maximum field width - -w number --width=number Fixed field width - -c chars --padchars=chars Chars used (cyclically) for padding - -a ["r" or "l"] --align=["r" or "l"] Pad alignment (right/left) - -b chars --bback=chars Chars used to draw bar backgrounds (default ":") - -f chars --bfore=chars Chars used to draw bar foregrounds (default "#") - -W number --bwidth=number Bar width (default 10) - -t output template --template=output template Output template of the command. - -Commands' arguments must be set as a list. Es: - - Run Weather "EGPF" ["-t","<station>: <tempC>C"] 36000 - -In this case [xmobar] will run the weather monitor, getting information -for the weather station ID EGPF (Glasgow Airport, as a homage to GHC) -every hour (36000 tenth of seconds), with a template that will output -something like: - - Glasgow Airport: 16.0C - -## Executing External Commands - -In order to execute an external command you can either write the -command name in the template, in this case it will be executed without -arguments, or you can configure it in the "commands" configuration -option list with the Com template command: - -`Com ProgramName Args Alias RefreshRate` - -- ProgramName: the name of the program -- Args: the arguments to be passed to the program at execution time -- Alias: a name to be used in the template. If the alias is en empty - string the program name can be used in the template. - -Es: - - Run Com "uname" ["-s","-r"] "" 36000 - -can be used in the output template as `%uname%` - - Run Com "date" ["+\"%a %b %_d %H:%M\""] "mydate" 600 - -can be used in the output template as `%mydate%` - -## Other Plugins - -`Date Args Alias RefreshRate` - -`StdinReader` - -`CommandReader "/path/to/program" Alias` - -`PipeReader "/path/to/pipe" Alias` - -Plugins -======= - -## Writing a Plugin - -Writing a plugin for [xmobar] should be very simple. You need to create -a data type with at least one constructor. - -Next you must declare this data type an instance of the `Exec` class, by -defining the 1 needed method (alternatively `start` or `run`) and 2 -optional ones (alias and rate): - - start :: e -> (String -> IO ()) -> IO () - run :: e -> IO String - rate :: e -> Int - alias :: e -> String - -`start` must receive a callback to be used to display the `String` -produced by the plugin. This method can be used for plugins that need -to perform asynchronous actions. See `Plugins/PipeReader.hs` for an -example. - -`run` can be used for simpler plugins. If you define only `run` the -plugin will be run every second. To overwrite this default you just -need to implement `rate`, which must return the number of tenth of -seconds between every successive runs. See `Plugins/HelloWorld.hs` for -an example of a plugin that runs just once, and `Plugins/Date.hs` for -one that implements `rate`. - -Notice that Date could be implemented as: - - instance Exec Date where - alias (Date _ a _) = a - start (Date f _ r) = date f r - - date :: String -> Int -> (String -> IO ()) -> IO () - date format r callback = do go - where go = do - t <- toCalendarTime =<< getClockTime - callback $ formatCalendarTime defaultTimeLocale format t - tenthSeconds r >> go - -This implementation is equivalent to the one you can read in -`Plugins/Date.hs`. - -`alias` is the name to be used in the output template. Default alias -will be the data type constructor. - -Implementing a plugin requires importing the plugin API (the `Exec` -class definition), that is exported by `Plugins.hs`. So you just need -to import it in your module with: - - import Plugins - -After that your type constructor can be used as an argument for the -Runnable type constructor `Run` in the `commands` list of the -configuration options. - -This requires importing your plugin into `Config.hs` and adding your -type to the type list in the type signature of `Config.runnableTypes`. - -For a very basic example see `Plugins/HelloWorld.hs` or the other -plugins that are distributed with [xmobar]. - -## Installing/Removing a Plugin - -Installing a plugin should require 3 steps. Here we are going to -install the HelloWorld plugin that comes with [xmobar]: - -1. import the plugin module in `Config.hs`, by adding: - - import Plugins.HelloWorld - -2. add the plugin data type to the list of data types in the type - signature of `runnableTypes` in `Config.hs`. For instance, for the - HelloWorld plugin, change `runnableTypes` into: - - runnableTypes :: Command :*: Monitors :*: HelloWorld :*: () - runnableTypes = undefined - -3. Rebuild and reinstall [xmobar]. Now test it with: - - xmobar Plugins/helloworld.config - -As you may see in the example configuration file, the plugin can be -used by adding, in the `commands` list: - - Run HelloWorld - -and, in the output template, the alias of the plugin: - - %helloWorld% - -That's it. - -To remove a plugin, just remove its type from the type signature of -runnableTypes and remove the imported modules. - -To remove the system monitor plugin: - -1. remove, from `Config.hs`, the line - - import Plugins.Monitors - -2. in `Config.hs` change - - runnableTypes :: Command :*: Monitors :*: () - runnableTypes = undefined - - to - - runnableTypes :: Command :*: () - runnableTypes = undefined - -3. rebuild [xmobar]. - -Credits -======= - -Thanks to Robert Manea and Spencer Janssen for their help in -understanding how X works. They gave me suggestions on how to solve -many problems with [xmobar]. - -Thanks to Claus Reinke for make me understand existential types (or at -least for letting me think I grasp existential types...;-). - -[xmobar] incorporates patches from: Krzysztof Kosciuszkiewicz, Spencer -Janssen, Jens Petersen, Dmitry Kurochkin, Lennart Kolmodin, and -Norbert Zeh. - -Useful links -============ - -The [xmobar] home page - -The [xmonad] home page - -[xmobar darcs repository] - -To understand the internal mysteries of xmobar you may try reading -this tutorial [on X Window Programming in Haskell]. - -Author -====== - -Andrea Rossato - -`andrea.rossato at ing.unitn.it` - -Legal -===== - -This software is released under a BSD-style license. See LICENSE for -more details. - -Copyright © 2007 Andrea Rossato - -[This is a screen shot]: http://haskell.org/sitewiki/images/a/ae/Arossato-config.png -[Hackage]: http://hackage.haskell.org/cgi-bin/hackage-scripts/package/xmobar -[xmobar]: http://hackage.haskell.org/cgi-bin/hackage-scripts/package/xmobar -[xmobar darcs repository]: http://code.haskell.org/xmobar -[on X Window Programming in Haskell]: http://www.haskell.org/haskellwiki/X_window_programming_in_Haskell -[Ion3]: http://modeemi.fi/~tuomov/ion/ -[xmonad]: http://xmonad.org -[utf8-string]: http://hackage.haskell.org/cgi-bin/hackage-scripts/package/utf8-string -[X11-xft]: http://hackage.haskell.org/cgi-bin/hackage-scripts/package/X11-xft -[i3status]: http://i3.zekjur.net/i3status/ -- cgit v1.2.3