Version 1.2.1 imported1.2.1

git-archimport-id: mdk@sv.gnu.org/mdk--devel--1--patch-1

1 files changed, 285 insertions, 0 deletions

diff --git a/doc/gendocs.sh b/doc/gendocs.sh
new file mode 100755
index 0000000..7b8a3ca
--- /dev/null
+++ b/doc/gendocs.sh
@@ -0,0 +1,285 @@
+#!/bin/sh
+# gendocs.sh -- generate a GNU manual in many formats.  This script is
+#   mentioned in maintain.texi.  See the help message below for usage details.
+# $Id: gendocs.sh,v 1.4 2005/09/20 20:18:58 jao Exp $
+# 
+# Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, you can either send email to this
+# program's maintainer or write to: The Free Software Foundation,
+# Inc.; 51 Franklin Street, Fifth Floor; Boston, MA 02110-1301, USA.
+#
+# Original author: Mohit Agarwal.
+# Send bug reports and any other correspondence to bug-texinfo@gnu.org.
+
+prog="`basename \"$0\"`"
+srcdir=`pwd`
+
+scripturl="http://savannah.gnu.org/cgi-bin/viewcvs/texinfo/texinfo/util/gendocs.sh"
+templateurl="http://savannah.gnu.org/cgi-bin/viewcvs/texinfo/texinfo/util/gendocs_template"
+
+: ${MAKEINFO="makeinfo"}
+: ${TEXI2DVI="texi2dvi -t @finalout"}
+: ${DVIPS="dvips"}
+: ${DOCBOOK2TXT="docbook2txt"}
+: ${DOCBOOK2HTML="docbook2html"}
+: ${DOCBOOK2PDF="docbook2pdf"}
+: ${DOCBOOK2PS="docbook2ps"}
+: ${GENDOCS_TEMPLATE_DIR="."}
+unset CDPATH
+
+rcs_revision='$Revision: 1.4 $'
+rcs_version=`set - $rcs_revision; echo $2`
+program=`echo $0 | sed -e 's!.*/!!'`
+version="gendocs.sh $rcs_version
+
+Copyright (C) 2005 Free Software Foundation, Inc.
+There is NO warranty.  You may redistribute this software
+under the terms of the GNU General Public License.
+For more information about these matters, see the files named COPYING."
+
+usage="Usage: $prog [OPTION]... PACKAGE MANUAL-TITLE
+
+Generate various output formats from PACKAGE.texinfo (or .texi or .txi) source.
+See the GNU Maintainers document for a more extensive discussion:
+  http://www.gnu.org/prep/maintain_toc.html
+
+Options:
+  -o OUTDIR   write files into OUTDIR, instead of manual/.
+  --docbook   convert to DocBook too (xml, txt, html, pdf and ps).
+  --html ARG  pass indicated ARG to makeinfo for HTML targets.
+  --help      display this help and exit successfully.
+  --version   display version information and exit successfully.
+
+Simple example: $prog emacs \"GNU Emacs Manual\"
+
+Typical sequence:
+  cd YOURPACKAGESOURCE/doc
+  wget \"$scripturl\"
+  wget \"$templateurl\"
+  $prog YOURMANUAL \"GNU YOURMANUAL - One-line description\"
+
+Output will be in a new subdirectory \"manual\" (by default, use -o OUTDIR
+to override).  Move all the new files into your web CVS tree, as
+explained in the Web Pages node of maintain.texi.
+
+MANUAL-TITLE is included as part of the HTML <title> of the overall
+manual/index.html file.  It should include the name of the package being
+documented.  manual/index.html is created by substitution from the file
+$GENDOCS_TEMPLATE_DIR/gendocs_template.  (Feel free to modify the
+generic template for your own purposes.)
+
+If you have several manuals, you'll need to run this script several
+times with different YOURMANUAL values, specifying a different output
+directory with -o each time.  Then write (by hand) an overall index.html
+with links to them all.
+
+You can set the environment variables MAKEINFO, TEXI2DVI, and DVIPS to
+control the programs that get executed, and GENDOCS_TEMPLATE_DIR to
+control where the gendocs_template file is looked for.
+
+Email bug reports or enhancement requests to bug-texinfo@gnu.org.
+"
+
+calcsize()
+{
+  size="`ls -ksl $1 | awk '{print $1}'`"
+  echo $size
+}
+
+outdir=manual
+html=
+PACKAGE=
+MANUAL_TITLE=
+
+while test $# -gt 0; do
+  case $1 in
+    --help) echo "$usage"; exit 0;;
+    --version) echo "$version"; exit 0;;
+    -o) shift; outdir=$1;;
+    --docbook) docbook=yes;;
+    --html) shift; html=$1;;
+    -*)
+      echo "$0: Unknown or ambiguous option \`$1'." >&2
+      echo "$0: Try \`--help' for more information." >&2
+      exit 1;;
+    *)
+      if test -z "$PACKAGE"; then
+        PACKAGE=$1
+      elif test -z "$MANUAL_TITLE"; then
+        MANUAL_TITLE=$1
+      else
+        echo "$0: extra non-option argument \`$1'." >&2
+        exit 1
+      fi;;
+  esac
+  shift
+done
+
+if test -s $srcdir/$PACKAGE.texinfo; then
+  srcfile=$srcdir/$PACKAGE.texinfo
+elif test -s $srcdir/$PACKAGE.texi; then
+  srcfile=$srcdir/$PACKAGE.texi
+elif test -s $srcdir/$PACKAGE.txi; then
+  srcfile=$srcdir/$PACKAGE.txi
+else
+  echo "$0: cannot find .texinfo or .texi or .txi for $PACKAGE in $srcdir." >&2
+  exit 1
+fi
+
+if test ! -r $GENDOCS_TEMPLATE_DIR/gendocs_template; then
+  echo "$0: cannot read $GENDOCS_TEMPLATE_DIR/gendocs_template." >&2
+  echo "$0: it is available from $templateurl." >&2
+  exit 1
+fi
+
+echo Generating output formats for $srcfile
+
+cmd="${MAKEINFO} -o $PACKAGE.info $srcfile"
+echo "Generating info files... ($cmd)"
+eval $cmd
+mkdir -p $outdir/
+tar czf $outdir/$PACKAGE.info.tar.gz $PACKAGE.info*
+info_tgz_size="`calcsize $outdir/$PACKAGE.info.tar.gz`"
+# do not mv the info files, there's no point in having them available
+# separately on the web.
+
+cmd="${TEXI2DVI} $srcfile"
+echo "Generating dvi ... ($cmd)"
+eval $cmd
+
+# now, before we compress dvi:
+echo Generating postscript...
+${DVIPS} $PACKAGE -o
+gzip -f -9 $PACKAGE.ps
+ps_gz_size="`calcsize $PACKAGE.ps.gz`"
+mv $PACKAGE.ps.gz $outdir/
+
+# compress/finish dvi:
+gzip -f -9 $PACKAGE.dvi
+dvi_gz_size="`calcsize $PACKAGE.dvi.gz`"
+mv $PACKAGE.dvi.gz $outdir/
+
+cmd="${TEXI2DVI} --pdf $srcfile"
+echo "Generating pdf ... ($cmd)"
+eval $cmd
+pdf_size="`calcsize $PACKAGE.pdf`"
+mv $PACKAGE.pdf $outdir/
+
+cmd="${MAKEINFO} -o $PACKAGE.txt --no-split --no-headers $srcfile"
+echo "Generating ASCII... ($cmd)"
+eval $cmd
+ascii_size="`calcsize $PACKAGE.txt`"
+gzip -f -9 -c $PACKAGE.txt >$outdir/$PACKAGE.txt.gz
+ascii_gz_size="`calcsize $outdir/$PACKAGE.txt.gz`"
+mv $PACKAGE.txt $outdir/
+
+cmd="${MAKEINFO} --no-split --html -o $PACKAGE.html $html $srcfile"
+echo "Generating monolithic html... ($cmd)"
+rm -rf $PACKAGE.html  # in case a directory is left over
+eval $cmd
+html_mono_size="`calcsize $PACKAGE.html`"
+gzip -f -9 -c $PACKAGE.html >$outdir/$PACKAGE.html.gz
+html_mono_gz_size="`calcsize $outdir/$PACKAGE.html.gz`"
+mv $PACKAGE.html $outdir/
+
+cmd="${MAKEINFO} --html -o $PACKAGE.html $html $srcfile"
+echo "Generating html by node... ($cmd)"
+eval $cmd
+split_html_dir=$PACKAGE.html
+(
+  cd ${split_html_dir} || exit 1
+  tar -czf ../$outdir/${PACKAGE}.html_node.tar.gz -- *.html
+)
+html_node_tgz_size="`calcsize $outdir/${PACKAGE}.html_node.tar.gz`"
+rm -f $outdir/html_node/*.html
+mkdir -p $outdir/html_node/
+mv ${split_html_dir}/*.html $outdir/html_node/
+rmdir ${split_html_dir}
+
+echo Making .tar.gz for sources...
+srcfiles=`ls *.texinfo *.texi *.txi *.eps 2>/dev/null`
+tar cvzfh $outdir/$PACKAGE.texi.tar.gz $srcfiles
+texi_tgz_size="`calcsize $outdir/$PACKAGE.texi.tar.gz`"
+
+if test -n "$docbook"; then
+  cmd="${MAKEINFO} -o - --docbook $srcfile > ${srcdir}/$PACKAGE-db.xml"
+  echo "Generating docbook XML... $(cmd)"
+  eval $cmd
+  docbook_xml_size="`calcsize $PACKAGE-db.xml`"
+  gzip -f -9 -c $PACKAGE-db.xml >$outdir/$PACKAGE-db.xml.gz
+  docbook_xml_gz_size="`calcsize $outdir/$PACKAGE-db.xml.gz`"
+  mv $PACKAGE-db.xml $outdir/
+
+  cmd="${DOCBOOK2HTML} -o $split_html_db_dir ${outdir}/$PACKAGE-db.xml"
+  echo "Generating docbook HTML... ($cmd)"
+  eval $cmd
+  split_html_db_dir=html_node_db
+  (
+    cd ${split_html_db_dir} || exit 1
+    tar -czf ../$outdir/${PACKAGE}.html_node_db.tar.gz -- *.html
+  )
+  html_node_db_tgz_size="`calcsize $outdir/${PACKAGE}.html_node_db.tar.gz`"
+  rm -f $outdir/html_node_db/*.html
+  mkdir -p $outdir/html_node_db
+  mv ${split_html_db_dir}/*.html $outdir/html_node_db/
+  rmdir ${split_html_db_dir}
+
+  cmd="${DOCBOOK2TXT} ${outdir}/$PACKAGE-db.xml"
+  echo "Generating docbook ASCII... ($cmd)"
+  eval $cmd
+  docbook_ascii_size="`calcsize $PACKAGE-db.txt`"
+  mv $PACKAGE-db.txt $outdir/
+
+  cmd="${DOCBOOK2PS} ${outdir}/$PACKAGE-db.xml"
+  echo "Generating docbook PS... $(cmd)"
+  eval $cmd
+  gzip -f -9 -c $PACKAGE-db.ps >$outdir/$PACKAGE-db.ps.gz
+  docbook_ps_gz_size="`calcsize $outdir/$PACKAGE-db.ps.gz`"
+  mv $PACKAGE-db.ps $outdir/
+
+  cmd="${DOCBOOK2PDF} ${outdir}/$PACKAGE-db.xml"
+  echo "Generating docbook PDF... ($cmd)"
+  eval $cmd
+  docbook_pdf_size="`calcsize $PACKAGE-db.pdf`"
+  mv $PACKAGE-db.pdf $outdir/
+fi
+
+echo Writing index file...
+curdate="`date '+%B %d, %Y'`"
+sed \
+   -e "s!%%TITLE%%!$MANUAL_TITLE!g" \
+   -e "s!%%DATE%%!$curdate!g" \
+   -e "s!%%PACKAGE%%!$PACKAGE!g" \
+   -e "s!%%HTML_MONO_SIZE%%!$html_mono_size!g" \
+   -e "s!%%HTML_MONO_GZ_SIZE%%!$html_mono_gz_size!g" \
+   -e "s!%%HTML_NODE_TGZ_SIZE%%!$html_node_tgz_size!g" \
+   -e "s!%%INFO_TGZ_SIZE%%!$info_tgz_size!g" \
+   -e "s!%%DVI_GZ_SIZE%%!$dvi_gz_size!g" \
+   -e "s!%%PDF_SIZE%%!$pdf_size!g" \
+   -e "s!%%PS_GZ_SIZE%%!$ps_gz_size!g" \
+   -e "s!%%ASCII_SIZE%%!$ascii_size!g" \
+   -e "s!%%ASCII_GZ_SIZE%%!$ascii_gz_size!g" \
+   -e "s!%%TEXI_TGZ_SIZE%%!$texi_tgz_size!g" \
+   -e "s!%%DOCBOOK_HTML_NODE_TGZ_SIZE%%!$html_node_db_tgz_size!g" \
+   -e "s!%%DOCBOOK_ASCII_SIZE%%!$docbook_ascii_size!g" \
+   -e "s!%%DOCBOOK_PS_GZ_SIZE%%!$docbook_ps_gz_size!g" \
+   -e "s!%%DOCBOOK_PDF_SIZE%%!$docbook_pdf_size!g" \
+   -e "s!%%DOCBOOK_XML_SIZE%%!$docbook_xml_size!g" \
+   -e "s!%%DOCBOOK_XML_GZ_SIZE%%!$docbook_xml_gz_size!g" \
+   -e "s,%%SCRIPTURL%%,$scripturl,g" \
+   -e "s!%%SCRIPTNAME%%!$prog!g" \
+$GENDOCS_TEMPLATE_DIR/gendocs_template >$outdir/index.html
+
+echo "Done!  See $outdir/ subdirectory for new files."